|
02-13-2013, 11:13 PM
|
#1 |
|
Senior Member
 
Join Date: Apr 2008
Location: Franklinton NC
Posts: 1,309
|
Spindles
I have a set of spindles, backing plates, rotors and calipers from a 72 C10 Asking $100 obo. These are heavy so shipping will probably be high.
|
|
|
|
02-14-2013, 10:37 AM
|
#2 |
|
Senior Member
Join Date: Apr 2008
Location: Franklinton NC
Posts: 1,309
|
Re: Spindles
Price reduced to$80.
|
|
|
|
|
02-14-2013, 10:44 AM
|
#3 |
|
Registered User
Join Date: Jan 2013
Location: Madison, MS
Posts: 34
|
Re: Spindles
Can you include some pictures of the rotors and calipers? The spindles and backing plates look good. What kind of shape are the rotors and calipers in?
|
|
|
|
|
02-14-2013, 11:54 AM
|
#4 |
|
Senior Member
Join Date: Apr 2008
Location: Franklinton NC
Posts: 1,309
|
Re: Spindles
Thumpuppet I just pull the rotors off of the brake lathe and they are under spec. One of the calipers was tight when pushing the piston back in so I would recommend a rebuild kit or using these as cores. I will post a pic of the calipers if you are still interested or I will sell the spindles for $60 plus shipping.
|
|
|
|
|
02-14-2013, 03:38 PM
|
#5 |
|
Registered User
Join Date: Jan 2013
Location: Madison, MS
Posts: 34
|
Re: Spindles
If you will take $70 for the spindles, backing plates, and calipers I will arrange to have them picked up.
|
|
|
|
|
02-14-2013, 04:16 PM
|
#6 |
|
Senior Member
Join Date: Apr 2008
Location: Franklinton NC
Posts: 1,309
|
Re: Spindles
Done and I will throw in the old rotors, bearings, and dust caps if you want.
SOLD!!! Last edited by steelhorse; 02-16-2013 at 11:11 AM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
