wanted front cross brace for 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddyole 69 · 02-06-2008, 09:23 AM

need the cross bracing that is in front of the engline x-member my rolling frame did just that into a tree and bent my front brace into a u

so I am on the hunt for a replacement the frame is actually a 71 blazer so let me know what you have and what you need for it and thanks for checking my post Mike

Huck · 02-06-2008, 09:30 AM

Mike, I'm parting out a blazer--will check the front crossmember in the morning to see how decent it is and how difficult it may be to remove--Huck

JimKshortstep4x4 · 02-06-2008, 09:55 AM

I have one if Huck does not.

Jim

muddyole 69 · 02-06-2008, 01:05 PM

thanks guys please keep me informed and I will be glad to get one off of either of you just need the price with shipping Mike

Blue_71 · 02-06-2008, 01:46 PM

and if those two dont work, i have a blazer one here thats already out i can check condition on

**jerry moss** · 02-06-2008, 10:48 PM

FYI- they are same on 2wd and 4wd

JimKshortstep4x4 · 02-07-2008, 09:32 AM

Mike,

Did you hear back from Huck yet?

Jim

Huck · 02-08-2008, 11:28 AM

Mike, my crossmember is pretty well rusted --might opt for a better one. Huck

JimKshortstep4x4 · 02-08-2008, 06:58 PM

Mike,

On the front cross member, $12 plus
shipping. If this works for you, I will get it boxed up and get a shipping cost. Just PM me your address.

Jim

muddyole 69 · 02-09-2008, 03:19 AM

PM sent Jim thank you !!!!

02-06-2008, 09:23 AM	#1
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	wanted front cross brace for 4x4 need the cross bracing that is in front of the engline x-member my rolling frame did just that into a tree and bent my front brace into a u so I am on the hunt for a replacement the frame is actually a 71 blazer so let me know what you have and what you need for it and thanks for checking my post Mike __________________ hav'n fun be'n me

02-06-2008, 09:30 AM	#2
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: wanted front cross brace for 4x4 Mike, I'm parting out a blazer--will check the front crossmember in the morning to see how decent it is and how difficult it may be to remove--Huck

02-06-2008, 09:55 AM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: wanted front cross brace for 4x4 I have one if Huck does not. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

02-06-2008, 01:05 PM	#4
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: wanted front cross brace for 4x4 thanks guys please keep me informed and I will be glad to get one off of either of you just need the price with shipping Mike __________________ hav'n fun be'n me

02-06-2008, 10:48 PM	#6
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,756	Re: wanted front cross brace for 4x4 FYI- they are same on 2wd and 4wd __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-07-2008, 09:32 AM	#7
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: wanted front cross brace for 4x4 Mike, Did you hear back from Huck yet? Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

02-08-2008, 11:28 AM	#8
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: wanted front cross brace for 4x4 Mike, my crossmember is pretty well rusted --might opt for a better one. Huck

02-08-2008, 06:58 PM	#9
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: wanted front cross brace for 4x4 Mike, On the front cross member, $12 plus shipping. If this works for you, I will get it boxed up and get a shipping cost. Just PM me your address. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

02-09-2008, 03:19 AM	#10
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: wanted front cross brace for 4x4 PM sent Jim thank you !!!! __________________ hav'n fun be'n me



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.