Quote:
Originally Posted by Mechanic77
Here's some pictures of the work on the front suspension
One of the lower arms I fabbed up (I need to modify the ball joint plate and angle it up to keep the ball joint from binding )
Attachment 684964
One of the upper arms jigged up, ready to weld
Attachment 684965
Mounting the steering box
Attachment 684967
Front suspension mocked up
Attachment 684968
I built the arms with the ball joints moved forward to center the front wheels in the wheel wells and I also set it up with increased caster (6* base) with the option to go +/-2* besides the normal adjustment available. I'm running 2.5" drop spindles with the 1.25" thick rotors and Wilwood D52 calipers (thanks Jon ) The way I mounted the steering box it actually raises the center drag link approximately 0.75" from the stock '84 front geometry, so I'm hoping I can juggle thing around to reduce bumpsteer as much as possible.
|
what size pipe did you use on the frame for the gear? what is your take on this way VS. the kit?