Finally got the 4.5/6 drop finished

[Malamute]

Originally Posted by original-71

I went that route also and it is pricey but the products do work. or try amazon they have the entire kit plus all the pads for $132 and free shipping....seems like a deal and shipped to your front door. looks like only 2 left at that price though

Thanks! Just sent a link to my wife as she has Amazon Prime. I'll try to get this done in Dec and get some after pics up.

[original-71]

Originally Posted by Malamute

Thanks! Just sent a link to my wife as she has Amazon Prime. I'll try to get this done in Dec and get some after pics up.

your welcome, only other thing I would suggest is car brite butter wax after you are done it works as a wax and seal and really does leave a really soft smooth feel to your paint if you don't seal it more than likely you will feel gritty after time, good luck cant wait to see the outcome.

[Malamute]

Thanks, I'll try that as a final coat. Should I be concerned with the small clips on the trim if I remove it to buff? It already looks like one is toast as I see some double sided tape behind it in one spot. I really don't want to have to work around all of the trim and I think removing it would cut down the time needed to do the job.

[original-71]

Originally Posted by Malamute

Thanks, I'll try that as a final coat. Should I be concerned with the small clips on the trim if I remove it to buff? It already looks like one is toast as I see some double sided tape behind it in one spot. I really don't want to have to work around all of the trim and I think removing it would cut down the time needed to do the job.

Blue painters tape over your trim would be my suggestion may take time but less time than taking off your trim if clips are bad may have to do by hand around there...you can pm me if you need any help

[Malamute]

I sold the truck this morning, bittersweet.
Replaced it with a Blazer though, it will be much easier for the entire family to cruise around on the weekends now.

[BugzC10]

Originally Posted by Malamute

I sold the truck this morning, bittersweet.
Replaced it with a Blazer though, it will be much easier for the entire family to cruise around on the weekends now.

[lolife99]

Congrats on the sale of your truck.

[Malamute]

Originally Posted by BugzC10

http://67-72chevytrucks.com/vboard/s...d.php?t=697099

Originally Posted by lolife99

Congrats on the sale of your truck.

Thanks, Keith. I had to make a decision and this one was the one that had to go. Stella will stay in the family.

[Malamute]

Also, I measured the rear leafs and they are in fact 52" so hopefully the drop leaf will work. I think that will ride better than the flip kit. Thanks for the information and help!

[BugzC10]

Originally Posted by Malamute

http://67-72chevytrucks.com/vboard/s...d.php?t=697099



Thanks, Keith. I had to make a decision and this one was the one that had to go. Stella will stay in the family.

Damn...nice Blazer

[jcblue]

Congrats.

[hop sing]

Originally Posted by Becker67

Nice looking truck here's my truck with 255/60's in the front and 275/60's in the rear

this one is the best so far !!!! nice job on stance !!!