GA 60-62 4 speed steering column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**cwcarpenter98** · 04-11-2021, 06:30 PM

Got a 4 speed steering column. It probably needs bearings, but looks like it has the wiring for the turn signal switch in tact. Currently not able to ship because I don't have my steering wheel puller here in Milledgeville.

The steering wheel has cracks, but it is the bigger wheel.

$130 for column with the steering wheel.
$100 for just column
$50 for steering wheel if you want me to pull it off the column. - $old

I don't have the time to get quotes to ship stuff right now, so local pickup on these.

Also have a set of hood hinges with springs. Will update with price after I check how much play is in the rivets

**cwcarpenter98** · 05-11-2021, 09:44 PM

Ttt

**cwcarpenter98** · 06-19-2021, 04:13 PM

Steering wheel sold for $40 locally.

Will sell column for $80. Now that the wheel is gone, I could probably ship the column since it's a lot smaller now

**cwcarpenter98** · 07-15-2021, 11:21 PM

Open to offers on the column. If you need it, lets make a deal!

04-11-2021, 06:30 PM	#1
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	60-62 4 speed steering column Got a 4 speed steering column. It probably needs bearings, but looks like it has the wiring for the turn signal switch in tact. Currently not able to ship because I don't have my steering wheel puller here in Milledgeville. The steering wheel has cracks, but it is the bigger wheel. $130 for column with the steering wheel. $100 for just column $50 for steering wheel if you want me to pull it off the column. - $old I don't have the time to get quotes to ship stuff right now, so local pickup on these. Also have a set of hood hinges with springs. Will update with price after I check how much play is in the rivets Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson Last edited by cwcarpenter98; 06-19-2021 at 04:13 PM.

05-11-2021, 09:44 PM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: 60-62 4 speed steering column Ttt __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

06-19-2021, 04:13 PM	#3
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: 60-62 4 speed steering column Steering wheel sold for $40 locally. Will sell column for $80. Now that the wheel is gone, I could probably ship the column since it's a lot smaller now __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

07-15-2021, 11:21 PM	#4
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: 60-62 4 speed steering column Open to offers on the column. If you need it, lets make a deal! __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.