The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > S10 S15 Luv Blazer > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-14-2012, 05:49 PM   #1
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Gonna put 5.3 in my S10

I'm picking up the parts I need to put a 2004 5.3 in my 92 S10,my 327 had some problems and it's time to update.

I bought a 2004 5.3 from a Tahoe with computer and all accesories with 90,000 miles for $600.00. I bought a set of Fbody exhaust manifolds instead of headers.

I'm buying a aftermarket underdash AC unit from Yogi's to put in at the same time I install my motor.

I'm going to use this thread as my build thread so if you have any ?'s or suggestions please let me know. For the next few weeks it will be slow but once I get everything together I'll hump to put her back on the road.
Indian113 is offline   Reply With Quote
Old 01-15-2012, 10:47 PM   #2
patgizz
Registered User
 
patgizz's Avatar
 
Join Date: Oct 2002
Location: Cleveland, OH
Posts: 429
Re: Gonna put 5.3 in my S10

curious to see how the exhaust manis work, i have been considering a 4.8 or 5.3 in my 91 sonoma instead of the traditional small block swap route. i'm sold on the gen3 engines, i put a 5.3 in my 95 impala SS and it puts the LT1 to shame.
patgizz is offline   Reply With Quote
Old 01-16-2012, 01:04 AM   #3
chevyndn
Registered User
 
Join Date: Jan 2009
Location: independence mo.
Posts: 176
Re: Gonna put 5.3 in my S10

oh i cant wait to see this wanting to do the same swap to my s10 blazer and do the awd swap to since its 4x4....
chevyndn is offline   Reply With Quote
Old 01-16-2012, 07:10 AM   #4
gchemist
BAD BOW-Silverado XST
 
gchemist's Avatar
 
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
Re: Gonna put 5.3 in my S10

You can use older A/C lines by modifying a bracket. This setup is the least expensive to setup.
http://www.maliburacing.com/forum/vi...hp?=34&t=79059



You can buy an aftermarket bracket.
http://www.kwikperf.com/lsx_ac.html
__________________
Gerardo a.k.a. Mad Chemist
Silverado XST videos
gchemist is offline   Reply With Quote
Old 01-16-2012, 08:27 PM   #5
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Re: Gonna put 5.3 in my S10

If anyone is interested there is a forum just for V8S10's,it has helped me a lot. It's http://www.V8s10.org they have a section for everything on S10's
Indian113 is offline   Reply With Quote
Old 01-18-2012, 11:06 PM   #6
waybad
Registered User
 
waybad's Avatar
 
Join Date: Jan 2010
Location: Evansville,IN
Posts: 409
Re: Gonna put 5.3 in my S10

cool.
waybad is offline   Reply With Quote
Old 01-24-2012, 10:18 AM   #7
Jonce
Registered User
 
Jonce's Avatar
 
Join Date: Jul 2006
Location: Twin Cities, MN
Posts: 115
Re: Gonna put 5.3 in my S10

Quote:
Originally Posted by Indian113 View Post
If anyone is interested there is a forum just for V8S10's,it has helped me a lot. It's http://www.V8s10.org they have a section for everything on S10's
I think you will find a lot of info here here as well.

It helped me with my '93 S-10


__________________
__________________________________
1971 GMC Stepside
350HO Deluxe 330hp, TH350 w/Gear Vendors, 3.73 Eaton posi, Fitech EFI, Boyd's Welding Tank, Ridler wheels, ECE 4/6" drop, front/rear sway bar
________________________________
Jonce is offline   Reply With Quote
Old 01-24-2012, 11:16 AM   #8
LB-LB
Registered User
 
LB-LB's Avatar
 
Join Date: Nov 2009
Location: Jacksonville, FL
Posts: 21
Re: Gonna put 5.3 in my S10

http://www.currentperformance.com/index.html has alot of swap parts also but they are pricey. I am leaning towards using a harness from them.
__________________
1982 C-10 SWB Stepside going down
1985 K-10 SWB Fleetside going up
LB-LB is offline   Reply With Quote
Old 01-24-2012, 01:03 PM   #9
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Re: Gonna put 5.3 in my S10

Jonce,that looks Nice!!

What did you do for exhaust?
Indian113 is offline   Reply With Quote
Old 01-27-2012, 08:22 PM   #10
Jonce
Registered User
 
Jonce's Avatar
 
Join Date: Jul 2006
Location: Twin Cities, MN
Posts: 115
Re: Gonna put 5.3 in my S10

Quote:
Originally Posted by LB-LB View Post
http://www.currentperformance.com/index.html has alot of swap parts also but they are pricey. I am leaning towards using a harness from them.
That's where I got my harness from, plug and play. Yes, it costs some money but it probably saved me a weeks worth of time and electrical gremlins. I bought a few items from Jared at Current Performance, great customer service.

Quote:
Originally Posted by Indian113 View Post
Jonce,that looks Nice!!

What did you do for exhaust?
Thanks, I used Sanderson shortie headers and Heartthrob V8 S-10 exhaust. I just cut the collectors off and welded on some new ones that matched the Sandersons. http://www.heartthrobexhaust.com/hea...cessories.html


I am actually buying my S10 back this Spring. Should be fun, can't wait to drive it again.
__________________
__________________________________
1971 GMC Stepside
350HO Deluxe 330hp, TH350 w/Gear Vendors, 3.73 Eaton posi, Fitech EFI, Boyd's Welding Tank, Ridler wheels, ECE 4/6" drop, front/rear sway bar
________________________________
Jonce is offline   Reply With Quote
Old 01-27-2012, 08:38 PM   #11
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Re: Gonna put 5.3 in my S10

I have a buddy that is going to mod my harness,I'm leaving it a in stock mode atleast at first. I have to sell my old motor and Nos kit first as my wife put her foot down and said SO. I need to get some money together to go get my 5.3
Indian113 is offline   Reply With Quote
Old 01-29-2012, 06:22 AM   #12
gchemist
BAD BOW-Silverado XST
 
gchemist's Avatar
 
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
Re: Gonna put 5.3 in my S10

Save money for it!! I would like to put a 5.3 in my Jimmy. I like the power of the 4.3 but the 5.3 would be awsome. Same great milage or better with minor programming. At least for 96 and later, the swap is easier. The original PCM is kept in place for basic functions like the instrument cluster. The 5.3 PCM is added for only engine functions. A custom harness makes the swap easier. Here is a conversion: http://www.hotrodlane.cc/PDFFILES/Lisa%20Tahoe.pdf
__________________
Gerardo a.k.a. Mad Chemist
Silverado XST videos
gchemist is offline   Reply With Quote
Old 01-30-2012, 08:04 PM   #13
oldman3
Senior Member
 
oldman3's Avatar
 
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,549
Re: Gonna put 5.3 in my S10

Ray, I knew you had gotten the S-10, but didn't know about changing to the 5.3. I will keep a watch on the thread, so I can keep you in line (ha ha), wife is taking care of that.....Jim
oldman3 is offline   Reply With Quote
Old 01-30-2012, 08:18 PM   #14
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Re: Gonna put 5.3 in my S10

Your right Jim, the wife hid the checkbook and credit cards on me!! She said It will wait till you can pay cash out of "your pocket" She's kinda bullheaded but I love her
Indian113 is offline   Reply With Quote
Old 03-13-2012, 08:50 PM   #15
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Re: Gonna put 5.3 in my S10

Update, sorry my father in law had some medical problems and I've spent a lot of my time running my Mother in law back and forth to the hospital. He's doing better and back home,I don't regret helping them as I feel blessed for having them!!!

I went and picked up my 5.3 today-WHAT A CLUSTER XXXX I got to the yard at 8 am and finally hit the road at 3 pm. They sold the 5.3 I wanted but I bought a 2004 with 81,000 miles.

As they were pulling it I noticed the manifold was cracked and the Main harness had been cut in too. They found another truck witha good harness so we took it out but it was a cable throttle and I have DBW. I grabbed the computer for both trucks and a extra intake cover . I got back to my truck and and they had put a intake in the bed for me.

My motor has a single fuel line rails the intake they gave me has dual fuel line rails!! I may try to sell the DBW pedal and computer wit the cut harness and throttle cheap.I will try to take pictures wed. when we take it out of my Dodge. So bottem line I got motor 2 computers, 1 good harness 1 messed up one and pedal assembly for DBW =$800.00 and 1 LOST DAY
Indian113 is offline   Reply With Quote
Old 07-12-2012, 08:49 PM   #16
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Re: Gonna put 5.3 in my S10

Finally some action on my Dime!! We set the motor in the frame today,I have to modify my heater box as it hits the right head. I forgot my camera today so I'll take pictures friday. I also bought some different weld pro stars,15x6 and 15x8 with 215 on the front and 275's on rear.
Indian113 is offline   Reply With Quote
Old 07-13-2012, 12:24 PM   #17
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Re: Gonna put 5.3 in my S10

Here's my 5.3 sitting in the frame,also the heater box I have to modify to fit the right head.
Attached Images
     
Indian113 is offline   Reply With Quote
Old 08-15-2012, 05:21 PM   #18
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Re: Gonna put 5.3 in my S10

We found out the camaro manifolds wouldn't clear the aarms on passenger side, also looked like the drivers side was going to be tough without changing a lot of steering parts.

I bought a set of patriot headers from the Car Shop in Moline,Ill. shipped to me at $275.00 they look a lot better.

We're hoping to pull the motor the last time thursday,hopefully by next week I can put frontend back on!
Indian113 is offline   Reply With Quote
Old 08-15-2012, 11:25 PM   #19
oldman3
Senior Member
 
oldman3's Avatar
 
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,549
Re: Gonna put 5.3 in my S10

Hey Ray, take plenty of pics on install, so we can see frame clearance, exhaust, etc. Like the way it is looking....Jim
oldman3 is offline   Reply With Quote
Old 08-16-2012, 07:42 AM   #20
Sburch5887
Registered User
 
Join Date: Aug 2012
Location: Newnan, GA
Posts: 8
Re: Gonna put 5.3 in my S10

I can fIx the harness they cut into, I have a bunch of harness ends and know the harnesses inside and out, Even if they cut it in half.. I can also modify the harness to stand alone for you if you need, and add in a fuse box with the necessary fuses and relays you're going to need a lot cheaper than you can buy a harness from summit or painless. I am doing a swap on my 83 S-10, doing a 6.0 from an 03 Escalade only because it's an h.o. Motor 03-04. And a 4L60e trans.. Pretty simple swap, (ive done about 8 or 9 of these LS swaps in different old cars) i have not gotten to the part about the heater box yet, and ive got an a/c truck so im in for it looks like! Lemme know if I can help at all.
Posted via Mobile Device
Sburch5887 is offline   Reply With Quote
Old 08-16-2012, 09:39 AM   #21
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Re: Gonna put 5.3 in my S10

Quote:
Originally Posted by oldman3 View Post
Hey Ray, take plenty of pics on install, so we can see frame clearance, exhaust, etc. Like the way it is looking....Jim
I can do that,This has been a lot more complicated than just putting a V8 in it! I think it's going to make a real fun DD-Hope it has enough git up and go to keep the Wife happy

My goal is to make it look like the 5.3 belongs in my engine compartment, not just thrown in!
Indian113 is offline   Reply With Quote
Old 08-16-2012, 09:47 AM   #22
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Re: Gonna put 5.3 in my S10

Sburch5887,thanks for the offer! I have a cable intake and throttle with harness now. The harness they cut in too was for a DBW, I have the intake and throttle for taht also plus pedal and computer.

My buddy thats helping me is modifing the harness for a standalone system. I have a 700r4 so I hope every thing works when it's done.

I'm hoping I can put air in it this winter as it didn't work out for me during install. I think I'm going to buy the Alan Grove brackets so I can use a Sanden compressor.
Indian113 is offline   Reply With Quote
Old 08-17-2012, 03:10 AM   #23
Sburch5887
Registered User
 
Join Date: Aug 2012
Location: Newnan, GA
Posts: 8
Re: Gonna put 5.3 in my S10

A lot of LS swaper's do the cable setup and it seems to workout ok for them I just like the DBW setup, it's really the way to go for me.. Its only a matter of modifying & mounting the pedal which can be a pain sometimes depending on the car I'm working on. But what I also like about it is that the cruise is only a matter of hooking up a few wires vs. Running an extra box & cable. So on your a/c, you weren't able to use the delphi air compressor that mounts on the bottom right side of the block? I was hoping to be able to with mine, I have been able to use that on all my swaps so far except for a 78 Corvette because of the frame, so we had to go aftermarket.
Posted via Mobile Device
Sburch5887 is offline   Reply With Quote
Old 08-17-2012, 03:18 AM   #24
Sburch5887
Registered User
 
Join Date: Aug 2012
Location: Newnan, GA
Posts: 8
Re: Gonna put 5.3 in my S10

Hey if that cut up DBW harness is for sale I'll take it off your hands with or without the pedal, tac module & throttle body, just gimmie a price with or without plus shipping to 30263, I'll use it on one of my next swaps. And by the way, did you know the only difference in intakes are the egr holes & not weather its cable or DBW tb? I always use either a non-egr truck intake or do a Corvette style intake, which involves modifying the accessory brackets, but we figured out a way to run a Vette intake without going to Vette accessories, we use all the stock truck accessories.
Posted via Mobile Device
Sburch5887 is offline   Reply With Quote
Old 08-19-2012, 07:44 AM   #25
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Re: Gonna put 5.3 in my S10

The compresser was in the crossmember and I didn't want to mess with cutting it up. When we get done I'll take a inventory of all my left over parts and make you a deal on them.
Indian113 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com