Cranks on run and crank/gauge question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dman1982 · 03-10-2021, 06:53 PM

At it again, I pulled my old harness and putting in a new bp automotive harness, I was hooking up the starter and solenoid wires, now it cranks in the run and crank position. Has anyone else encountered this problem? I did have a issue with the neutral safety switch before. I havnt fully wired up the gauges and inside of my cab. This is kicking my butt.

Second question
I just bought a autometer 7004 lcd gauge cluster, I was running autometer electric gauges before, are those sending units still the same?

**mongocanfly** · 03-10-2021, 09:22 PM

might check the wire connections for the switch sound your your switch on and crank are touching or connected wrong..

**nsb29** · 03-12-2021, 08:19 AM

You might also check your wires on the plug to make sure they’re in the right place my headlight switch from them came miss wired

03-10-2021, 06:53 PM	#1
dman1982 Registered User Join Date: Jul 2010 Location: jacksonville nc Posts: 1,229	Cranks on run and crank/gauge question At it again, I pulled my old harness and putting in a new bp automotive harness, I was hooking up the starter and solenoid wires, now it cranks in the run and crank position. Has anyone else encountered this problem? I did have a issue with the neutral safety switch before. I havnt fully wired up the gauges and inside of my cab. This is kicking my butt. Second question I just bought a autometer 7004 lcd gauge cluster, I was running autometer electric gauges before, are those sending units still the same? __________________ Sgt Dennis Heineman USMC Aviation Ordnance I.Y.A.O.Y.A.S 2001-Present 84 K10 2000 trans am ws6 2011 nissan altima 2009 Troy Built with a 42 Inch Deck My LS Swap http://67-72chevytrucks.com/vboard/s...=1#post6559371

03-10-2021, 09:22 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,579	Re: Cranks on run and crank/gauge question might check the wire connections for the switch sound your your switch on and crank are touching or connected wrong.. __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

03-12-2021, 08:19 AM	#3
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: Cranks on run and crank/gauge question You might also check your wires on the plug to make sure they’re in the right place my headlight switch from them came miss wired __________________ Hand made A/C vent manifolds for 64-66 trucks adapts any aftermarket A/C to OEM vent

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.