The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-27-2017, 05:38 PM   #251
70custom20
Registered User
 
70custom20's Avatar
 
Join Date: Dec 2007
Location: Quakertown Pa.
Posts: 119
Re: Power Brake Booster Adapter Bracket

I saw in another thread, someone had posted a whole sheet of GM PRO numbers for brake boosters. The JM3 reads booster, brake, 240mm high flow, while the JM5 reads booster, brake, 200mm high flow. I'm not sure what difference the milometer size has to do with anything. Also, would it be better to grab one of these boosters off of a early 2000's S-10 at the junk yard, or would it be better to buy one at a local parts store like NAPA, etc??
70custom20 is offline   Reply With Quote
Old 07-27-2017, 05:46 PM   #252
70custom20
Registered User
 
70custom20's Avatar
 
Join Date: Dec 2007
Location: Quakertown Pa.
Posts: 119
Re: Power Brake Booster Adapter Bracket

I looked for an edit feature, couldn't find one. Anyway, RPO not PRO. I saw quite a few of the JM3 boosters in a local hard in early 2000's S-10 blazers. How much of a PITA are they to pull out of the truck?
70custom20 is offline   Reply With Quote
Old 07-27-2017, 05:47 PM   #253
MASTERBrian
Registered User
 
Join Date: Jan 2017
Location: Wichita
Posts: 604
Re: Power Brake Booster Adapter Bracket

Quote:
Originally Posted by 70custom20 View Post
I saw in another thread, someone had posted a whole sheet of GM PRO numbers for brake boosters. The JM3 reads booster, brake, 240mm high flow, while the JM5 reads booster, brake, 200mm high flow. I'm not sure what difference the milometer size has to do with anything. Also, would it be better to grab one of these boosters off of a early 2000's S-10 at the junk yard, or would it be better to buy one at a local parts store like NAPA, etc??
I can't answer the other questions, but if you're asking if better to buy used or new....I'd think everyone would say New. Unless your funds don't allow. Mine is from a c1500, forget the year.
MASTERBrian is offline   Reply With Quote
Old 07-27-2017, 11:54 PM   #254
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,373
Re: Power Brake Booster Adapter Bracket

Which is better, new or used, depends on your preference and budget. With a rebuilt one, you will need a core or pay the core charge. Pulling a used booster can take some time as there is quite a bit that needs to be removed before you can get to the nuts on the studs and the pushrod on the brake pedal. You will need a long extension or two and a swivel socket or a universal joint.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 07-28-2017, 09:26 PM   #255
70custom20
Registered User
 
70custom20's Avatar
 
Join Date: Dec 2007
Location: Quakertown Pa.
Posts: 119
Re: Power Brake Booster Adapter Bracket

The money doesn't bother me either way. I just wasn't sure if buying one from NAPA or another parts store was better or worse, based on it seems like replacement parts are sometimes pretty ****ty these days.
70custom20 is offline   Reply With Quote
Old 07-28-2017, 09:39 PM   #256
MASTERBrian
Registered User
 
Join Date: Jan 2017
Location: Wichita
Posts: 604
Re: Power Brake Booster Adapter Bracket

Quote:
Originally Posted by 70custom20 View Post
The money doesn't bother me either way. I just wasn't sure if buying one from NAPA or another parts store was better or worse, based on it seems like replacement parts are sometimes pretty ****ty these days.
Personally I'd worry about how long the thing say and if the diagram is therefore cracked on used.
MASTERBrian is offline   Reply With Quote
Old 07-28-2017, 11:48 PM   #257
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,373
Re: Power Brake Booster Adapter Bracket

In my experience the original GM boosters can last a long time. Hook one up to engine vacuum and see if it holds vacuum. If so, the diaphram is good.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 08-09-2017, 03:03 AM   #258
n3xb360
Registered User
 
Join Date: Nov 2014
Location: Kelowna, British Columbia
Posts: 9
Re: Power Brake Booster Adapter Bracket

I was wondering if you ship internationally? And how much it is for the 67-72 booster bracket with hydraulic clutch conversation
n3xb360 is offline   Reply With Quote
Old 08-09-2017, 11:13 PM   #259
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,373
Re: Power Brake Booster Adapter Bracket

Yes I ship worldwide. The price for the '67-'68 or '69-'72 booster bracket with the hydraulic clutch conversion is exactly the same as in post #1 of the for sale thread seen here.

http://www.67-72chevytrucks.com/vboa...d.php?t=652871

Shipping that large box to Canada is quite expensive. The shipping alone is about $64.00 USD. Many of my Canadian customers have a delivery address just this side of the border.

Quote:
Originally Posted by n3xb360 View Post
I was wondering if you ship internationally? And how much it is for the 67-72 booster bracket with hydraulic clutch conversation
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 08-23-2017, 08:28 AM   #260
69ChevyCST
Registered User
 
Join Date: Feb 2011
Location: IL
Posts: 1
Re: Power Brake Booster Adapter Bracket

Being a fabricator I was a little hesitant to buy something I could make myself with a little effort. I received my adapter bracket (powder coated) in the mail and was very impressed with the quality of the bracket. Packaging, weld and powder coat quality was second to none. Thanks for supplying a quality product!

James McGrew
Owner
Madison Street Hot Rods
__________________
1969 CST Short Bed - (LT4/4L60)
1974 Chevelle Laguna S-3 (406/4-Speed)
1970 Olds 442 (455/4-Speed)
1935 Chevy 3-Window Coupe (Stock)
69ChevyCST is offline   Reply With Quote
Old 08-23-2017, 10:57 PM   #261
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,373
Re: Power Brake Booster Adapter Bracket

Thank you for the compliments and I appreciate the purchase
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 08-30-2017, 11:37 AM   #262
beaterku
Senior Member
 
beaterku's Avatar
 
Join Date: Mar 2013
Location: Lenexa, KS
Posts: 497
Re: Power Brake Booster Adapter Bracket

I'm interested in this bracket. It makes for a very clean setup. I do have a question. I have a factory tilt column that I bought from Kevsclassics. Looking at where the shift arm is in relation to the center-line of the brake push rod, an 8" dual booster might be a tight fit.

Can anyone confirm that an 8" dual booster such as the Inline Tubing unit http://r.ebay.com/dYzdyl will fit with the factory tilt column shift arm?

Thanks!
beaterku is offline   Reply With Quote
Old 08-30-2017, 11:19 PM   #263
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,373
Re: Power Brake Booster Adapter Bracket

From what info I have received from a couple past customers, you must use a booster that is smaller than 10" in diameter. If it were me, I would go with a 9-9.5" diameter dual diaphram booster.

Quote:
Originally Posted by beaterku View Post
I'm interested in this bracket. It makes for a very clean setup. I do have a question. I have a factory tilt column that I bought from Kevsclassics. Looking at where the shift arm is in relation to the center-line of the brake push rod, an 8" dual booster might be a tight fit.

Can anyone confirm that an 8" dual booster such as the Inline Tubing unit http://r.ebay.com/dYzdyl will fit with the factory tilt column shift arm?

Thanks!
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 09-27-2017, 11:23 PM   #264
Mikem_72
Registered User
 
Join Date: Apr 2014
Location: Needville, Texas
Posts: 67
Re: Power Brake Booster Adapter Bracket

Captainfab,

Received my bracket today, thank you for the speedy delivery and a beautiful product. I'll post pictures of it installed after paint. Thank you again!!
__________________
-Mike

1970 C10 Stepside 350/700r4
Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632707
Mikem_72 is offline   Reply With Quote
Old 10-11-2017, 04:48 PM   #265
Mikem_72
Registered User
 
Join Date: Apr 2014
Location: Needville, Texas
Posts: 67
Re: Power Brake Booster Adapter Bracket

Quote:
Originally Posted by Mikem_72 View Post
Captainfab,

Received my bracket today, thank you for the speedy delivery and a beautiful product. I'll post pictures of it installed after paint. Thank you again!!
Finally got everything mounted, thanks again Captainfab!!
Attached Images
  
__________________
-Mike

1970 C10 Stepside 350/700r4
Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632707
Mikem_72 is offline   Reply With Quote
Old 10-12-2017, 12:16 AM   #266
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,373
Re: Power Brake Booster Adapter Bracket

Thanks for posting a couple pics.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 10-17-2017, 11:55 PM   #267
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,373
Re: Power Brake Booster Adapter Bracket

All of my booster brackets now come with slotted booster mounting holes to also accept aftermarket universal boosters with the 2-3/8" x 2-3/8" center to center mounting studs.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 11-28-2017, 04:36 PM   #268
gringoloco
A guy with a truck
 
gringoloco's Avatar
 
Join Date: Sep 2005
Location: Weezy
Posts: 5,695
Re: Power Brake Booster Adapter Bracket

PayPal sent for powder coated bracket. Thanks!
__________________
-Chris

Instagram _elgringoloco_

'70 Short-Wide How to: Ruin a perfectly good C10
70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd
'72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD)
'72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD)
'05 Yukon Daily Driven (not so stock) Yukon (SOLD)
07 Yukon Denali (daily)

Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy
gringoloco is offline   Reply With Quote
Old 11-29-2017, 12:55 AM   #269
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,373
Re: Power Brake Booster Adapter Bracket

PM sent

Quote:
Originally Posted by gringoloco View Post
PayPal sent for powder coated bracket. Thanks!
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-28-2017, 09:24 PM   #270
rob32472
Registered User
 
Join Date: May 2007
Location: dallas ga
Posts: 1,484
Re: Power Brake Booster Adapter Bracket

Pay pal sent
rob32472 is offline   Reply With Quote
Old 12-29-2017, 12:19 AM   #271
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,373
Re: Power Brake Booster Adapter Bracket

Payment received for a powder coated standard '67-'72 booster bracket.

Quote:
Originally Posted by rob32472 View Post
Pay pal sent
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 01-10-2018, 01:04 AM   #272
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,373
Re: Power Brake Booster Adapter Bracket

I am officially notifying everyone that I will be on vacation from 02-05-18 thru 02-13-18. I will do my best to get all orders built and shipped before I leave, if placed by 01-31-18. Orders placed while I am gone will be built and shipped in order of receipt of payment once I return. Thanks for understanding.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 02-18-2018, 11:42 PM   #273
Cheyenne1970
Junior Member
 
Join Date: Oct 2016
Location: Placentia, California
Posts: 89
Re: Power Brake Booster Adapter Bracket

Hello I would like to purchase an adapter bracket, how much would it cost for a powder coated one shipped to 92870?
Cheyenne1970 is offline   Reply With Quote
Old 02-19-2018, 01:01 AM   #274
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 22,373
Re: Power Brake Booster Adapter Bracket

The price is Exactly the same as in post #1 of this for sale thread........$77.65

Quote:
Originally Posted by Cheyenne1970 View Post
Hello I would like to purchase an adapter bracket, how much would it cost for a powder coated one shipped to 92870?
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 02-19-2018, 01:06 AM   #275
Cheyenne1970
Junior Member
 
Join Date: Oct 2016
Location: Placentia, California
Posts: 89
Re: Power Brake Booster Adapter Bracket

Sorry I forgot ask about the hydroboost mount plate as well
Cheyenne1970 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:35 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com