351 Windsor - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyD · 07-05-2007, 10:57 PM

Buy a 67-68 Stang (coupe) or a 66-67 fairlane for the W. Both cars are still cheap and light enough to provide a pretty wild ride.

stsalvage · 07-06-2007, 02:06 AM

I've seen worse i've seen a 1957 Nomad with a 426 Hemi in it Not my idea of a good fit but Nice Find But a old man in Norco Calif has a 1969 C10 short bed with a 427 ford side oiler with tri power on it with a 727 torq flight with a B&M adaptor Plate with a 9 inch Rear End it use to run trail laps at Riverside Raceway back in 1972 140 mph not bad for a old truck

smoked68 · 07-06-2007, 06:28 AM

I love you guys, why the good lord is taking pittty on me after the bike drama. My sons 02 Siverado Z-71 monster trucks trans. took a dump a week ago, the guy that is going to fix it, had it towed there last night (Ford roll back by the by, ironic) any way he gives us 2 posi 3:73 setups. and another ring & pinion. Things are starting to look up. Hopefully we will have the truck finished by its 40th b-day. Thanks to all you good fellas, you made my day. Mike

Mudder · 07-06-2007, 06:51 AM

just seeing the title here makes me wanna ..............never mind.

**special-K** · 07-06-2007, 07:03 AM

Quote:

Originally Posted by stsalvage

I've seen worse i've seen a 1957 Nomad with a 426 Hemi in it Not my idea of a good fit but Nice Find But a old man in Norco Calif has a 1969 C10 short bed with a 427 ford side oiler with tri power on it with a 727 torq flight with a B&M adaptor Plate with a 9 inch Rear End it use to run trail laps at Riverside Raceway back in 1972 140 mph not bad for a old truck

Those are both legandary motors.That makes a difference.Uh...the`69 was only 3 years old in`72.
I just like Fords in Fords.People swap SBCs into about everything since you can get anything anywhere and cheaper.The two motors in topic are just too comparible to justify the effort,IMO.

I hope your luck has taken an upward sweep.You have the outlook that it takes.

bobthecop · 07-06-2007, 08:56 AM

Quote:

Originally Posted by 71tahoe

You may even get some members suggesting making it into a flower pot or a boat anchor. Wish I had one to put into a '69 cougar that I also wish I had.

If we had some eggs we could have ham and eggs, if we had some ham.

71tahoe · 07-06-2007, 11:11 AM

Quote:

Originally Posted by bobthecop

If we had some eggs we could have ham and eggs, if we had some ham.

I know:

"Wish in one hand and spit in the other. See which one fills up faster."

Rokcrln · 07-06-2007, 11:28 AM

Sorry but I like Fords and Chevys and have several of both. I try and keep them seperated so no cross breeding will occure. But it has happened once so far. In my rock buggy that is based on a 71 Ford Bronco I have a 351W pushing about 450hp with all Chevy TBI injection including the HEI dist, computer. But my chevys are all Chevy!

Now keep in mind even if you don't like Fords or Ford guys their are still better than Honda,s and Toyota's

Kevin
LFD Inc.

rlm316 · 07-06-2007, 11:34 AM

In the early '80s a friend of mine had a '72 C10 with a 455 Buick and a 400t. That puppy would really haul the mail. He was big into Buick, even had a yellow GSX. Keep it all in the family, even if it is the ugly cousin.

Frizzle Fry · 07-06-2007, 11:35 AM

Quote:

Originally Posted by Rokcrln

Now keep in mind even if you don't like Fords or Ford guys their are still better than Honda,s and Toyota's

Kevin
LFD Inc.

**raggedjim** · 07-06-2007, 11:46 AM

Why do I keep getting a mental picture of a 10 speed bicycle with ape-hanger handle bars on it???

bad6772 · 07-06-2007, 04:39 PM

Quote:

Originally Posted by bobthecop

If we had some eggs we could have ham and eggs, if we had some ham.

lol why sir you are a genuis lmao

smoked68 · 07-06-2007, 06:32 PM

I couldn`t help it.Now,keep the crap out or you`ll mess up your old man`s account.
this is my account and he is using mine. Im getting tired of the people on the board being jerks about what he posted. an alternative to this would be saying if it were me I personally wouldnt do it but then you have all the funny guys that would apparently use it for a boat anchor.

eedgell · 07-06-2007, 06:43 PM

Then why are you here stirring the debate? If you like to piss off chevy guys.... then put the weak 351w in a lawn mower, and go cut some grass, have fun. There are forums for your type... Go there.

raoul.duke · 07-06-2007, 06:51 PM

As stated earlier on the board:

"from the Dawn of Time when trucks came to are country.What is the one thing that we all Know....." oh, never mind.

**special-K** · 07-06-2007, 10:06 PM

Look guys,the original poster hear has a great disposition about Ford and Chevy.He stuck his neck out a bit starting this thread,but let`s not get nasty.The policy here is move on if you have nothing good to say.This thread is open to opinions,but let`s keep it friendly,right junior?Don`t be a troll.

eedgell · 07-06-2007, 10:17 PM

Who is the troll? I thought this was a 67-72 chevy thread?

wheatlandbrawler · 07-06-2007, 10:33 PM

they are both great power plants but it just depends on reliability when it gets to making big power no doubt hands down is chevy not only cheaper to make go fast and make good power numbers but its reliable because if something goes you can generally replace that part for a fraction of a ford replacement aftermarket part but its different and different is cool.

eedgell · 07-06-2007, 10:38 PM

And who exactly is "junior"?

CG · 07-06-2007, 10:46 PM

Does this mean I cant put my 427 Chevy in my 51 Ford coupe? So many rules I had no idea about

**special-K** · 07-06-2007, 11:30 PM

Tisk tisk,what were you thinking.Now go sit in the corner.You`re on time-out.Hey,that`s one motor(other than the 302) that Ford and Chevy made the same size.So,I guess it`s ok,right?

Eedgell,I`m talking about Smoked68s son who jumped in on daddy`s user namer to troll.Re-read his last post now

.

eedgell · 07-06-2007, 11:36 PM

Thats cool, but who edited that post? What it says now is not what I responded to.

**special-K** · 07-07-2007, 07:06 AM

I did.I`m a secret agent.Don`t tell anyone and whatever you do,DON`T POST IT ON THE INTERNET!!!
I messed him up instead of deleting it.I just made it a bit more acceptible.Ya think?

smoked68 · 07-07-2007, 11:35 AM

i also wasnt hating on chevy. i have an 02 silverado. I just stated that it would be funny to do since everyone puts the chevy motors in ford. then all the "die hard" chevy guys took offense to him saying he would put a 351 in the chevy and made all sorts of off the wall comments. BTW ill say it again. I (corey) started this screen name and he (my dad mike) uses mine because I dont have time to get on and he does. hes only been posting under my name "smoked68" for about a month. any more creative comments to that?

eedgell · 07-07-2007, 12:45 PM

What ever floats your boat, but a bit counter productive to the board. Dont you think? Stay on top of them Special-K!!!

07-05-2007, 10:57 PM	#26
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,167	Re: 351 Windsor Buy a 67-68 Stang (coupe) or a 66-67 fairlane for the W. Both cars are still cheap and light enough to provide a pretty wild ride. __________________ "You can take the man out of PA, but you can't take PA out of the man"

07-06-2007, 02:06 AM	#27
stsalvage Scrapper 1 Join Date: Jan 2007 Location: Riverside Calif Posts: 1,649	Re: 351 Windsor I've seen worse i've seen a 1957 Nomad with a 426 Hemi in it Not my idea of a good fit but Nice Find But a old man in Norco Calif has a 1969 C10 short bed with a 427 ford side oiler with tri power on it with a 727 torq flight with a B&M adaptor Plate with a 9 inch Rear End it use to run trail laps at Riverside Raceway back in 1972 140 mph not bad for a old truck

07-06-2007, 06:28 AM	#28
smoked68 Registered User Join Date: Oct 2006 Location: Rock Hill, SC Posts: 421	Re: 351 Windsor I love you guys, why the good lord is taking pittty on me after the bike drama. My sons 02 Siverado Z-71 monster trucks trans. took a dump a week ago, the guy that is going to fix it, had it towed there last night (Ford roll back by the by, ironic) any way he gives us 2 posi 3:73 setups. and another ring & pinion. Things are starting to look up. Hopefully we will have the truck finished by its 40th b-day. Thanks to all you good fellas, you made my day. Mike __________________ 1968 chevy shortbed, Dark Shadow Gray 4 bolt 383 Stroker,Weiand Super Charger, disc brakes, 9 inch, 391 gear, 20" Eagle wheels, muncie 4 speed/ Hurst shifter, 4/7 drop, Hedman midlengths, 3 inch exhaust w/ 2 chamber flows. 1966 Mustang with 306 roller, c-4, 9 inch Detroit locker rear. 1965 Fastback Mustang w/347 stroker, top loader 4spd, 9 inch detroit locker. 1966 Mustang coup, 306 roller, c4, 9 inch. 65 Cobra, 427, T6oo, 9inch, of course. First gen Hayabusa, airbox mod and running 2 exhaust cams.. Zoom Zoom Zoom Last edited by smoked68; 07-06-2007 at 06:33 PM.

07-06-2007, 06:51 AM	#29
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,339	Re: 351 Windsor just seeing the title here makes me wanna ..............never mind.

07-06-2007, 11:28 AM	#33
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: 351 Windsor Sorry but I like Fords and Chevys and have several of both. I try and keep them seperated so no cross breeding will occure. But it has happened once so far. In my rock buggy that is based on a 71 Ford Bronco I have a 351W pushing about 450hp with all Chevy TBI injection including the HEI dist, computer. But my chevys are all Chevy! Now keep in mind even if you don't like Fords or Ford guys their are still better than Honda,s and Toyota's Kevin LFD Inc. Attached Images

07-06-2007, 11:34 AM	#34
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: 351 Windsor In the early '80s a friend of mine had a '72 C10 with a 455 Buick and a 400t. That puppy would really haul the mail. He was big into Buick, even had a yellow GSX. Keep it all in the family, even if it is the ugly cousin.

07-06-2007, 11:46 AM	#36
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,366	Re: 351 Windsor Why do I keep getting a mental picture of a 10 speed bicycle with ape-hanger handle bars on it??? __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd

07-06-2007, 06:32 PM	#38
smoked68 Registered User Join Date: Oct 2006 Location: Rock Hill, SC Posts: 421	Re: 351 Windsor I couldn`t help it.Now,keep the crap out or you`ll mess up your old man`s account. this is my account and he is using mine. Im getting tired of the people on the board being jerks about what he posted. an alternative to this would be saying if it were me I personally wouldnt do it but then you have all the funny guys that would apparently use it for a boat anchor. __________________ 1968 chevy shortbed, Dark Shadow Gray 4 bolt 383 Stroker,Weiand Super Charger, disc brakes, 9 inch, 391 gear, 20" Eagle wheels, muncie 4 speed/ Hurst shifter, 4/7 drop, Hedman midlengths, 3 inch exhaust w/ 2 chamber flows. 1966 Mustang with 306 roller, c-4, 9 inch Detroit locker rear. 1965 Fastback Mustang w/347 stroker, top loader 4spd, 9 inch detroit locker. 1966 Mustang coup, 306 roller, c4, 9 inch. 65 Cobra, 427, T6oo, 9inch, of course. First gen Hayabusa, airbox mod and running 2 exhaust cams.. Zoom Zoom Zoom Last edited by smoked68; 07-07-2007 at 11:32 AM.

07-06-2007, 06:43 PM	#39
eedgell It's the air up here Join Date: Mar 2007 Location: Western Colorado Posts: 710	Re: 351 Windsor Then why are you here stirring the debate? If you like to piss off chevy guys.... then put the weak 351w in a lawn mower, and go cut some grass, have fun. There are forums for your type... Go there. __________________ 1971 cheyenne k10 4 speed np 205 454 BB factory a/c Never drink down stream of the herd! Eric Last edited by eedgell; 07-06-2007 at 06:45 PM.

07-06-2007, 06:51 PM	#40
raoul.duke Sandwich: Club Join Date: Mar 2006 Location: Houston, TX Posts: 119	Re: 351 Windsor As stated earlier on the board: "from the Dawn of Time when trucks came to are country.What is the one thing that we all Know....." oh, never mind.

07-06-2007, 10:06 PM	#41
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 351 Windsor Look guys,the original poster hear has a great disposition about Ford and Chevy.He stuck his neck out a bit starting this thread,but let`s not get nasty.The policy here is move on if you have nothing good to say.This thread is open to opinions,but let`s keep it friendly,right junior?Don`t be a troll. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 07-06-2007 at 10:07 PM.

07-06-2007, 10:17 PM	#42
eedgell It's the air up here Join Date: Mar 2007 Location: Western Colorado Posts: 710	Re: 351 Windsor Who is the troll? I thought this was a 67-72 chevy thread? __________________ 1971 cheyenne k10 4 speed np 205 454 BB factory a/c Never drink down stream of the herd! Eric

07-06-2007, 10:33 PM	#43
wheatlandbrawler Registered User Join Date: Apr 2007 Location: salina, kansas Posts: 123	Re: 351 Windsor they are both great power plants but it just depends on reliability when it gets to making big power no doubt hands down is chevy not only cheaper to make go fast and make good power numbers but its reliable because if something goes you can generally replace that part for a fraction of a ford replacement aftermarket part but its different and different is cool. __________________ 1968 swb RIP 408. 388 roller monster mouse, richmond 5 speed. and alot of the stuff that makes you happy. build link. http://67-72chevytrucks.com/vboard/s...d.php?t=389826

07-06-2007, 10:38 PM	#44
eedgell It's the air up here Join Date: Mar 2007 Location: Western Colorado Posts: 710	Re: 351 Windsor And who exactly is "junior"? __________________ 1971 cheyenne k10 4 speed np 205 454 BB factory a/c Never drink down stream of the herd! Eric

07-06-2007, 10:46 PM	#45
CG BlahBlahBlah Join Date: Feb 2002 Location: Monroe, Wa. Posts: 19,773	Re: 351 Windsor Does this mean I cant put my 427 Chevy in my 51 Ford coupe? So many rules I had no idea about



Register or Log In To remove these advertisements.

07-06-2007, 11:30 PM	#46
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 351 Windsor Tisk tisk,what were you thinking.Now go sit in the corner.You`re on time-out.Hey,that`s one motor(other than the 302) that Ford and Chevy made the same size.So,I guess it`s ok,right? Eedgell,I`m talking about Smoked68s son who jumped in on daddy`s user namer to troll.Re-read his last post now. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-06-2007, 11:36 PM	#47
eedgell It's the air up here Join Date: Mar 2007 Location: Western Colorado Posts: 710	Re: 351 Windsor Thats cool, but who edited that post? What it says now is not what I responded to. __________________ 1971 cheyenne k10 4 speed np 205 454 BB factory a/c Never drink down stream of the herd! Eric

07-07-2007, 07:06 AM	#48
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 351 Windsor I did.I`m a secret agent.Don`t tell anyone and whatever you do,DON`T POST IT ON THE INTERNET!!! I messed him up instead of deleting it.I just made it a bit more acceptible.Ya think? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-07-2007, 11:35 AM	#49
smoked68 Registered User Join Date: Oct 2006 Location: Rock Hill, SC Posts: 421	Re: 351 Windsor i also wasnt hating on chevy. i have an 02 silverado. I just stated that it would be funny to do since everyone puts the chevy motors in ford. then all the "die hard" chevy guys took offense to him saying he would put a 351 in the chevy and made all sorts of off the wall comments. BTW ill say it again. I (corey) started this screen name and he (my dad mike) uses mine because I dont have time to get on and he does. hes only been posting under my name "smoked68" for about a month. any more creative comments to that? __________________ 1968 chevy shortbed, Dark Shadow Gray 4 bolt 383 Stroker,Weiand Super Charger, disc brakes, 9 inch, 391 gear, 20" Eagle wheels, muncie 4 speed/ Hurst shifter, 4/7 drop, Hedman midlengths, 3 inch exhaust w/ 2 chamber flows. 1966 Mustang with 306 roller, c-4, 9 inch Detroit locker rear. 1965 Fastback Mustang w/347 stroker, top loader 4spd, 9 inch detroit locker. 1966 Mustang coup, 306 roller, c4, 9 inch. 65 Cobra, 427, T6oo, 9inch, of course. First gen Hayabusa, airbox mod and running 2 exhaust cams.. Zoom Zoom Zoom Last edited by smoked68; 07-07-2007 at 12:57 PM.

07-07-2007, 12:45 PM	#50
eedgell It's the air up here Join Date: Mar 2007 Location: Western Colorado Posts: 710	Re: 351 Windsor What ever floats your boat, but a bit counter productive to the board. Dont you think? Stay on top of them Special-K!!! __________________ 1971 cheyenne k10 4 speed np 205 454 BB factory a/c Never drink down stream of the herd! Eric Last edited by eedgell; 07-07-2007 at 12:45 PM.

Register or Log In To remove these advertisements.