another seat idea to ponder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 10-24-2011, 03:22 PM

So I have a set of buckets and the center console / middle seat from an '03 silverado. have any of you ever put these in your blazer? were you able to still use the tilt foward frame? any pics? how about the back bench? I have that also. have any of you found a way to mount that to the tilt foward frame?

**michael bustamante** · 10-27-2011, 03:44 PM

anybody?

68Timber · 10-27-2011, 04:47 PM

tvblazer did in his 78, he's got a build thread here somewhere.

str8axle55 · 10-28-2011, 08:40 AM

I don`t know about the rear bench from a truck, but the Suburban 3rd row is the same width as the stock blazer seat. If you swapped all the loor brackets, you could have a folding removable rear. I know you can do the front seat using the stock Silverado mounts, without to much trouble. I don`t know if the cntr console will work though. My buddy put 02 seats in his K5, but used the split bench w/out the cntr seat, and it was almost a bolt in. I really don`t think you will be able to use the stock K5 brackets in any way.

Mr. 250r · 10-28-2011, 11:41 AM

For the front buckets from newer trucks I think most people notch the floor pan out for the rails since they are taller I guess and then put a reinforcing piece under the body because the seat belt is in the seat ad no longer on the wall as for the backs I'm not sure
Posted via Mobile Device

**michael bustamante** · 10-28-2011, 01:37 PM

I was actually trying to think of a way to use the stock seat mounts to keep the tilt on the passenger seat. I think Ill have to start from scratch. Ill keep you guys posted

**Zoomad75** · 10-30-2011, 07:22 PM

I put 02 silverado front buckets in my 75 K5 a few years ago. Because the silverado seat frame/tracks are all integrated, you can't keep the pass side tilt forward function for access to the rear seat. However, the seats move far enough forward that tilting the seat back gets enough room to get back there. I made brackets to bolt to the existing seat mounting points on the floor and match up to the silverado frames.

BLE 'BURBAN · 10-30-2011, 08:46 PM

I've been thinking about putting a set in the front of my Suburban out of an 04 silverado myself

iceship · 11-03-2011, 08:32 AM

Has anyone converted bench seat brackets to fit buckets.. just trying. Not to do a lot of cut and paste... Lol
Posted via Mobile Device

10-24-2011, 03:22 PM	#1
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	another seat idea to ponder So I have a set of buckets and the center console / middle seat from an '03 silverado. have any of you ever put these in your blazer? were you able to still use the tilt foward frame? any pics? how about the back bench? I have that also. have any of you found a way to mount that to the tilt foward frame? __________________ 1967custom

10-27-2011, 03:44 PM	#2
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: another seat idea to ponder anybody? __________________ 1967custom

10-27-2011, 04:47 PM	#3
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: another seat idea to ponder tvblazer did in his 78, he's got a build thread here somewhere. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

10-28-2011, 08:40 AM	#4
str8axle55 Registered User Join Date: May 2009 Location: Weymouth Ma Posts: 489	Re: another seat idea to ponder I don`t know about the rear bench from a truck, but the Suburban 3rd row is the same width as the stock blazer seat. If you swapped all the loor brackets, you could have a folding removable rear. I know you can do the front seat using the stock Silverado mounts, without to much trouble. I don`t know if the cntr console will work though. My buddy put 02 seats in his K5, but used the split bench w/out the cntr seat, and it was almost a bolt in. I really don`t think you will be able to use the stock K5 brackets in any way. __________________ 03 GMC Yukon XL 2500 Quadrasteer, wife`s DD 84 Chevy K30 CC SRW 55 Chevy 210 2dr post

10-28-2011, 11:41 AM	#5
Mr. 250r Registered User Join Date: Dec 2010 Location: freeburg, illinois Posts: 885	Re: another seat idea to ponder For the front buckets from newer trucks I think most people notch the floor pan out for the rails since they are taller I guess and then put a reinforcing piece under the body because the seat belt is in the seat ad no longer on the wall as for the backs I'm not sure Posted via Mobile Device __________________ 1987 Chevy V30 - http://67-72chevytrucks.com/vboard/s...d.php?t=573854 1988 IROC-Z Camaro - 305/T5 T-Top 1989 GMC V35 - Marbolo Express http://67-72chevytrucks.com/vboard/s...d.php?t=596850 1991 V2500 Suburban Silverado - Sold 1991 V2500 Suburban Scottsdale - Big Nasty http://67-72chevytrucks.com/vboard/s...d.php?t=497423 2001 Ram 3500 5.9 H.O NV56 EC DRW - Sold 2003 1500 Silverado 2004 Ram 3500 5.9 H.O NV56 CC DRW - Sold 2005 Silverado 2500HD 6.6/ZF6 CC LWB

10-28-2011, 01:37 PM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: another seat idea to ponder I was actually trying to think of a way to use the stock seat mounts to keep the tilt on the passenger seat. I think Ill have to start from scratch. Ill keep you guys posted __________________ 1967custom

10-30-2011, 07:22 PM	#7
Zoomad75 K5Camper Join Date: Mar 2004 Location: Pueblo, CO Posts: 1,513	Re: another seat idea to ponder I put 02 silverado front buckets in my 75 K5 a few years ago. Because the silverado seat frame/tracks are all integrated, you can't keep the pass side tilt forward function for access to the rear seat. However, the seats move far enough forward that tilting the seat back gets enough room to get back there. I made brackets to bolt to the existing seat mounting points on the floor and match up to the silverado frames. __________________ Rob Z. 1975 K5 350/465/205/D44/12b 4" lift on 35's- RIP 1991 K5 8.1L/NV4500/241/D44/14b FWC Camper

10-30-2011, 08:46 PM	#8
BLE 'BURBAN In the Forgotten far North. Join Date: Jul 2007 Location: Anchorage, Alaska Posts: 2,627	Re: another seat idea to ponder I've been thinking about putting a set in the front of my Suburban out of an 04 silverado myself __________________ 1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade

11-03-2011, 08:32 AM	#9
iceship Registered User Join Date: Apr 2011 Location: bowling green, ky Posts: 439	Re: another seat idea to ponder Has anyone converted bench seat brackets to fit buckets.. just trying. Not to do a lot of cut and paste... Lol Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.