OD Auto Tranmission that can handle a load. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Buford · 01-05-2009, 05:12 PM

What is a good 4-speed auto transmission that can used in my 71 GMC C2500. I was researching the 700r4 but it doesn't seem like it is a sturdy transmission for towing with (camper and small boat). Does anyone have any recommendations? Thanks.

chevy_mike · 01-05-2009, 05:32 PM

If you got the $$$$ a 4L80E is they way to go. They are basically a TH400 that's a 4 speed with overdrive.

The other option which is $$$ is putting a Gear Vendors overdrive setup behind a TH400. Of the two, it's most likely the cheaper route but you're still looking at $2500+.

I'm in the same boat, trying to find a reasonable solution and have yet to find one. I had a 700R4 in my last '68, which worked fine but I never did any hauling/towing with it.

Myself · 01-05-2009, 05:33 PM

Find a late eighties 700r4 and rebuild it with a Turbo 700 kit. It will handle anything you're going to throw at it. I can't remember who offers that kit but it seems like the way to go. Also TCI has a replacement valve body that makes the 700r4 work like a TH350 for fluid pressure. Then the TV cable is used to adjust shift points only. That setup would also be a good choice.

**breeh** · 01-05-2009, 07:18 PM

I have been running a 700R4 from BTO (not the band) for over 5 years now behind a fairly healthy big block. I have not had a single problem with it. I purchased their level 3. Here is a link:

http://www.bowtieoverdrives.com/cata...m.php?ITEMID=9

Buford · 01-06-2009, 01:27 AM

I'm a little hesitant to go with the gear vendor and TH400. I have a good friend of mine that runs that combo and the gear vendor keeps going out. I was looking at the 700R4 level three and that seems like a stout unit. Thanks for the options, I'll do some research.

Thanks

Dingfodgy · 01-06-2009, 01:37 AM

If you have the $$$ and time- I'm sure Advanced Adapters could fab up some sort of conversion kit to shoehorn in the Allison-1000 6-speed out of a Duramax Silverado. I haven't seen or heard of it being done- yet....so I'm basicallly thinking outloud at this point.

01-05-2009, 05:12 PM	#1
Buford Registered User Join Date: Apr 2008 Location: Los Angeles, CA Posts: 27	OD Auto Tranmission that can handle a load. What is a good 4-speed auto transmission that can used in my 71 GMC C2500. I was researching the 700r4 but it doesn't seem like it is a sturdy transmission for towing with (camper and small boat). Does anyone have any recommendations? Thanks. __________________ Buford - 1971 3/4 ton, Custom Camper, 350 Th, 350 SBC.

01-05-2009, 05:32 PM	#2
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: OD Auto Tranmission that can handle a load. If you got the $$$$ a 4L80E is they way to go. They are basically a TH400 that's a 4 speed with overdrive. The other option which is $$$ is putting a Gear Vendors overdrive setup behind a TH400. Of the two, it's most likely the cheaper route but you're still looking at $2500+. I'm in the same boat, trying to find a reasonable solution and have yet to find one. I had a 700R4 in my last '68, which worked fine but I never did any hauling/towing with it. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

01-05-2009, 05:33 PM	#3
Myself Registered User Join Date: Oct 2005 Location: Northern Arkansas Posts: 1,128	Re: OD Auto Tranmission that can handle a load. Find a late eighties 700r4 and rebuild it with a Turbo 700 kit. It will handle anything you're going to throw at it. I can't remember who offers that kit but it seems like the way to go. Also TCI has a replacement valve body that makes the 700r4 work like a TH350 for fluid pressure. Then the TV cable is used to adjust shift points only. That setup would also be a good choice.

01-05-2009, 07:18 PM	#4
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Re: OD Auto Tranmission that can handle a load. I have been running a 700R4 from BTO (not the band) for over 5 years now behind a fairly healthy big block. I have not had a single problem with it. I purchased their level 3. Here is a link: http://www.bowtieoverdrives.com/cata...m.php?ITEMID=9 __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

01-06-2009, 01:27 AM	#5
Buford Registered User Join Date: Apr 2008 Location: Los Angeles, CA Posts: 27	Re: OD Auto Tranmission that can handle a load. I'm a little hesitant to go with the gear vendor and TH400. I have a good friend of mine that runs that combo and the gear vendor keeps going out. I was looking at the 700R4 level three and that seems like a stout unit. Thanks for the options, I'll do some research. Thanks __________________ Buford - 1971 3/4 ton, Custom Camper, 350 Th, 350 SBC.

01-06-2009, 01:37 AM	#6
Dingfodgy Lemme show you something!! Join Date: Apr 2007 Location: St.Helens, OR. Posts: 876	Re: OD Auto Tranmission that can handle a load. If you have the $$$ and time- I'm sure Advanced Adapters could fab up some sort of conversion kit to shoehorn in the Allison-1000 6-speed out of a Duramax Silverado. I haven't seen or heard of it being done- yet....so I'm basicallly thinking outloud at this point. __________________ '67 CST-10 LWB ("Crusty") SOLD '67 GMC SWB ("Murdock") 2000 K1500 Suburban ("Betty") '95 BMW 325i ("Joy")



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.