383 & th400 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MDPotter** · 04-29-2020, 01:23 PM

My next project is a 69 C10. Bought it locally from a guy that had the original 350 bored & stroked to 383. Going the LS route, so want to sell the powertrain.

Block was bored, clearanced, all new gaskets, rings, plugs, bearings, Scat rods, Scat crank, Edelbrock heads, Keith Black hypereutectic pistons, Holley 650 carb, HEI ignition, roller rockers, timing set, and complete accessory drive from Billet Specialties. Backed up with a rebuilt TH400. Runs great, just want to take the truck in a different direction.

What's the engine and trans worth?

Name: IMG_7354[1].jpg
Views: 111
Size: 80.1 KB

Name: IMG_7354[1].jpg
Views: 111
Size: 80.1 KB

04-29-2020, 01:23 PM	#1
MDPotter Senior Member Join Date: Aug 2018 Location: Western Colorado Posts: 1,165	383 & th400 My next project is a 69 C10. Bought it locally from a guy that had the original 350 bored & stroked to 383. Going the LS route, so want to sell the powertrain. Block was bored, clearanced, all new gaskets, rings, plugs, bearings, Scat rods, Scat crank, Edelbrock heads, Keith Black hypereutectic pistons, Holley 650 carb, HEI ignition, roller rockers, timing set, and complete accessory drive from Billet Specialties. Backed up with a rebuilt TH400. Runs great, just want to take the truck in a different direction. What's the engine and trans worth? __________________ 1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632 1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047 1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184 1978 Chevy Scottsdale K20 1993 Chevy C1500 - 5.3/T56 swapped 2008 Silverado Duramax



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.