1991 Suburban Speed Hut Speedo install problem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ballencd · 03-20-2021, 07:27 PM

Hey Guys,

I have just installed a Speed Hut electronic speedometer in my 1991 V1500 Suburban. 5.7 TBI, 700R4, 241 transfer case.
Long story short....it does not work. The error I get when setting up the speedo is "No Signal". I am hooked to the pin 18 light blue w/black line which I believe comes from the DRAC and I expected it to work. I tried ground and no ground.

Any ideas?? I could use some help on this.

Thanks

ballencd
Name: IMG_3040.jpg
Views: 324
Size: 42.6 KB

Name: IMG_3040.jpg
Views: 324
Size: 42.6 KB

03-20-2021, 07:27 PM	#1
ballencd Registered User Join Date: Aug 2013 Location: Columbus, NC Posts: 83	1991 Suburban Speed Hut Speedo install problem Hey Guys, I have just installed a Speed Hut electronic speedometer in my 1991 V1500 Suburban. 5.7 TBI, 700R4, 241 transfer case. Long story short....it does not work. The error I get when setting up the speedo is "No Signal". I am hooked to the pin 18 light blue w/black line which I believe comes from the DRAC and I expected it to work. I tried ground and no ground. Any ideas?? I could use some help on this. Thanks ballencd __________________ 1983 M35 (bobbed and converted to dump) 1984 M1010 1988 Chevy Suburban (5.7TBI/TH700R4/NP208) 1991 Chevy Suburban (5.7TBI/TH700R4/NP241C)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.