|
04-16-2002, 03:10 PM
|
#1 |
|
Registered User
Join Date: Feb 2002
Location: dillsburg pa
Posts: 115
|
patch panel ?
i was wondering what people do to fix the area in the cab floor in the back corners. is there a patch panel avalible or am i going to have to make my own. i saw something at gmc pauls that sounded like it but with out a picture i can no be sure. thanks for any help
------------------ 67 k-20 w/327 and a 3speed and 4.57 rear with 17 inch split rims and 9 inch wide rubber(is my current project) 73 blazer 6 inch all spring lift 350/350 with crappy 3.08 gears and 35 inch bfg tires 54 chevy delray .060 over 250 i-6 which was taken from my first truck(68 gmc). it is next in line for a rebuild
__________________
67 k-20 w/327 and a 3speed and 4.57 rear with 17 inch split rims and 9 inch wide rubber(is my current project) 73 blazer 6 inch all spring lift 350/350 with crappy 3.08 gears and 35 inch bfg tires. just put out 135 hp to the wheels on the dyno. 54 chevy delray .060 over 250 i-6 which was taken from my first truck(68 gmc). it is next in line for a rebuild |
|
|
|
04-16-2002, 09:07 PM
|
#2 |
|
Senior Member
Join Date: Jun 2001
Location: Gaston, SC
Posts: 580
|
When I fixed my 70 cab, I had to make that piece myself.
------------------ milanplechata@hotmail.com Lexington, SC 1968 c/10 lwb 250/3 on the tree 1970 CST/10 lwb no motor/trans One bad 400sb waiting for a truck to call home.. http://communities.msn.com/6772GMTru...68longbed.msnw Every man dies, but not every man truly lives..
__________________
Milan 1964 Chevelle SS 283/M20 |
|
|
|
|
04-17-2002, 09:36 AM
|
#3 |
|
Registered User
 Join Date: Feb 2000
Location: Georgetown, KY, USA
Posts: 631
|
I need the pass rear corner where the jack sits. Does any one produce these???
------------------ Woody '69 Custom-10 Deluxe Short Fleetside,Factory 350cid/TH400,A/C,PS,PB,Carpet Coming soon 700R4, 350 Crate Engine, Pwr Disks... |
|
|
|
|
04-17-2002, 09:51 AM
|
#4 |
|
Registered User
Join Date: Nov 2001
Location: Concord, NC
Posts: 2,489
|
Yes, you can get everything you need with the exception of the middle part of the floor.
For a pic and discription check out Goodmark's website www.goodmarkindustries.com For the best prices, check with one of the venders on this Board. I think Kingparts offers a member discount, but check with vender on the board for better prices than Goodmark (most all parts come from the same place) |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
