The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-03-2018, 01:59 PM   #1
Husker
Registered User
 
Husker's Avatar
 
Join Date: Dec 1999
Location: Mid NE USA
Posts: 2,209
NP205 for TH350 coupler

Is this an odd coupler for the NP205? The bearing goes on the end where it is small diameter and towards the transmission. I have looked for a vendor that has one with no luck. Unable to find bearing. Would the straight coupler without bearing work? not sure on load on the transmission output shaft. Thanks
Ron
Attached Images
  
__________________
Member #111
68 C-10 Daily Driver
70 4x4 Project
76 Jeep CJ-5

Help Support the Board:

http://67-72chevytrucks.com/vboard/payments.php


He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors.
Thomas Jefferson
Husker is offline   Reply With Quote
Old 11-03-2018, 05:14 PM   #2
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,387
Re: NP205 for TH350 coupler

This was common in the early versions. You can use the later coupler without any problems. Wire brush the bearing (if you want to use this style again) and you should see a number on it.
kwmech is offline   Reply With Quote
Old 11-03-2018, 05:28 PM   #3
jocko
Senior Member
 
jocko's Avatar
 
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,930
Re: NP205 for TH350 coupler

The one pictured in post 1 is likely the original., not an odd one. Good discussion here with some part #'s, but yes, you can delete the bearing and use the non-stepped coupler no problem.
jocko is offline   Reply With Quote
Old 11-03-2018, 07:25 PM   #4
Husker
Registered User
 
Husker's Avatar
 
Join Date: Dec 1999
Location: Mid NE USA
Posts: 2,209
Re: NP205 for TH350 coupler

Thanks fellas I appreciate the info. I will try to find a part#
Ron
__________________
Member #111
68 C-10 Daily Driver
70 4x4 Project
76 Jeep CJ-5

Help Support the Board:

http://67-72chevytrucks.com/vboard/payments.php


He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors.
Thomas Jefferson
Husker is offline   Reply With Quote
Old 11-03-2018, 09:04 PM   #5
jocko
Senior Member
 
jocko's Avatar
 
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,930
Re: NP205 for TH350 coupler

There are a couple non-stepped couplers available - but make sure the part is applicable to the 71-72 TH350/NP205 combo - might have to call before ordering online.

Some later applications have a different length coupler.

For instance - tech info on this one says it specifically will NOT work with 72 and earlier, incorrect length (4+1/8")"
https://torqueking.com/product/30001...pline-coupler/

So that is what you want to avode.

These might work, but not sure, length is not listed:
https://www.summitracing.com/parts/a...4aAnDdEALw_wcB

https://www.ebay.com/itm/Chevy-GMC-T...-/282603673976

https://www.ebay.com/p/NP-205-Np205-...pler/675688490
jocko is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com