i cant believe this, i thoght my dash was cut, but this!!!! (pic) - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Downtown · 12-24-2002, 11:10 PM

I am thinking a piece of tape and JB Weld will fix you right up. For a repair that small I wouldn't bother with a regular welder. If you haven't used it before, give it a try. It is great stuff.

gary20 · 12-25-2002, 09:35 AM

Hi, I am new to this board. I had the same problem when i got my first 68 the radio part of the dash was completelty cut out and somebody made a custom plate and bolted it in, after i got it cut out the rest of the way i put a newer cd player in it but heres the sad part i let my friend driver the truck a week later and i was with him but we were on a country road and he saw a deer and swerved and we wrecked into a 10-12 foot ditch at about 50-60 something miles an hour i didn't have a speedometer. it really hurt but we were ok. here is a pic of it, bye

chevy_fatman · 12-25-2002, 02:13 PM

[QUOTE]There would be two more smaller holes for the screws that held the cover, one above and one below, if it was the ejection seat switch.

I got an ejection seat, hehehe

Jwill41 · 12-25-2002, 03:34 PM

here is the way mine was when i got it

Jwill41 · 12-25-2002, 03:37 PM

this is now. i have a 12 disc changer that i may put in.

Jwill41 · 12-25-2002, 03:39 PM

one more

>X< · 12-25-2002, 05:25 PM

hey xxl,for christmas (today) i got a porta cable tiger saw, argh argh argh(in tim allens Tool Time voice) cant wait to cut soething up wtih it!

GMC JUNKIE TOO · 12-25-2002, 06:06 PM

my hole on the left was for a push button start, and there used to be a light under it for the generator they had in back.

XXL · 12-25-2002, 06:19 PM

Quote:

Originally posted by seanh71
hey xxl,for christmas (today) i got a porta cable tiger saw, argh argh argh(in tim allens Tool Time voice) cant wait to cut soething up wtih it!

The Binford 8000? Argh argh argh... sounds like it's dash cuttin' time!

Kenneth

>X< · 12-25-2002, 07:30 PM

i am gonna get some of these blades that my friends dad who is fire chief got us, they are search and rescue blades that i dontknow if public can get or not, but i think i could slice thrugh a civic frame and all in about 3 minutes

Solver · 12-25-2002, 10:51 PM

I have had 3 trucks with that hole to the right of the dash bezel , and all 3 were wired with switches for auxillary gas tank to run gas gauge

>X< · 12-26-2002, 12:35 AM

well this is a swb step originally, so i doubt there was aux tanks, my 72 has aux tank i bet it has a hole or switch or somethign thre, cant remember. maybe the dash was taken out of a truck with aux tanks?

12-24-2002, 11:10 PM	#26
Downtown Senior Member Join Date: Dec 1999 Location: New Palestine, IN Posts: 470	I am thinking a piece of tape and JB Weld will fix you right up. For a repair that small I wouldn't bother with a regular welder. If you haven't used it before, give it a try. It is great stuff. __________________ 72 Shortbed fleetside 402 BB, AC, Posi 72 Super Cheyenne Longbed 350 49,000 original miles and My dad ordered it new 66 Chevy Caprice 2 dr 74 Honda CB750 New Palestine, IN

12-25-2002, 09:35 AM	#27
gary20 Registered User Join Date: Dec 2002 Posts: 1	radio plate Hi, I am new to this board. I had the same problem when i got my first 68 the radio part of the dash was completelty cut out and somebody made a custom plate and bolted it in, after i got it cut out the rest of the way i put a newer cd player in it but heres the sad part i let my friend driver the truck a week later and i was with him but we were on a country road and he saw a deer and swerved and we wrecked into a 10-12 foot ditch at about 50-60 something miles an hour i didn't have a speedometer. it really hurt but we were ok. here is a pic of it, bye Attached Images

12-25-2002, 02:13 PM	#28
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	[QUOTE]There would be two more smaller holes for the screws that held the cover, one above and one below, if it was the ejection seat switch. I got an ejection seat, hehehe __________________ Paul How do you make the invisible, visible?.........You take it away.

12-25-2002, 03:34 PM	#29
Jwill41 Registered User Join Date: Aug 2002 Location: Farmers Branch, Tx Posts: 1,009	here is the way mine was when i got it Attached Images __________________ http://www.picturetrail.com/jwill41 67 1/2 ton GMC short step side 68 1/2 ton Chevy long fleet side 72 1/2 ton Chevy Suburban 99 1/2 ton Chevy Suburban founder (and only member) of the primer/clearcoat club

12-25-2002, 03:37 PM	#30
Jwill41 Registered User Join Date: Aug 2002 Location: Farmers Branch, Tx Posts: 1,009	this is now. i have a 12 disc changer that i may put in. Attached Images __________________ http://www.picturetrail.com/jwill41 67 1/2 ton GMC short step side 68 1/2 ton Chevy long fleet side 72 1/2 ton Chevy Suburban 99 1/2 ton Chevy Suburban founder (and only member) of the primer/clearcoat club

12-25-2002, 03:39 PM	#31
Jwill41 Registered User Join Date: Aug 2002 Location: Farmers Branch, Tx Posts: 1,009	one more Attached Images __________________ http://www.picturetrail.com/jwill41 67 1/2 ton GMC short step side 68 1/2 ton Chevy long fleet side 72 1/2 ton Chevy Suburban 99 1/2 ton Chevy Suburban founder (and only member) of the primer/clearcoat club

12-25-2002, 05:25 PM	#32
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	hey xxl,for christmas (today) i got a porta cable tiger saw, argh argh argh(in tim allens Tool Time voice) cant wait to cut soething up wtih it! __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

12-25-2002, 06:06 PM	#33
GMC JUNKIE TOO THE QUICKER FIXERUPER Join Date: Jul 2002 Location: Ok Posts: 615	my hole on the left was for a push button start, and there used to be a light under it for the generator they had in back.

12-25-2002, 07:30 PM	#35
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	i am gonna get some of these blades that my friends dad who is fire chief got us, they are search and rescue blades that i dontknow if public can get or not, but i think i could slice thrugh a civic frame and all in about 3 minutes __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

12-25-2002, 10:51 PM	#36
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	I have had 3 trucks with that hole to the right of the dash bezel , and all 3 were wired with switches for auxillary gas tank to run gas gauge __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

12-26-2002, 12:35 AM	#37
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,483	well this is a swb step originally, so i doubt there was aux tanks, my 72 has aux tank i bet it has a hole or switch or somethign thre, cant remember. maybe the dash was taken out of a truck with aux tanks? __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.