T56 into a 67...... - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

6speed1972 · 02-01-2008, 02:28 AM

Good Deal. Just out of curiosity...with your 373 gears what is your 5th gear rpm (assuming you have a 1:1 5th gear and 15" tires) Thanks!

shifty · 02-01-2008, 02:37 AM

I don't know! I just got the linkage working, and just tore the entire truck apart again to do some stuff with the frame. I have 15" tires right now, but the truck won't be roadworthy for at least another few weeks, at least.

ryan913 · 02-01-2008, 02:44 AM

Are you going to put the 4 speed tranny cover in it now? Looks like you doing a great job! Do you have a rear mounted fuel tank? Reason being is I dont think moving the engine back 2.75 inches would make much difference. Thats all.

6speed1972 · 02-01-2008, 08:25 AM

These were really the best shots I could get of the linkage. Sorrry. I forgot that I used such a cheezy fastener, but hey I was only seventeen and was building this truck in my moms driveway on my own in highschool. HAHA. There were so many days I wanted to throw in the towel. I jumped into this with both feet with out testing the waters.

On the picture of the Mcylinder mounted on the outside firewall::::: the "thing" wrapped up in a towel is my computer. Wasnt sure where to mount it at the time and its still there. I was just wanting to get the truck running. But anyway these are the pictures. I am totally inspired to get it all cleaned up and fix the little things like this. I got married and had kids and lost a lot of free time...

Also threre is a pic of my extra T56 out of a 99 camero. I bought it with only 250 miles on it. Some idiot wrecked it brand new the same week he bought the car. I bought this in 2000 and took a draw from my work to buy it because of how hard at the time they were to find.

slowtruck · 02-05-2008, 02:06 PM

6speed1972- that's a nice truck you got there...

ryan913- I'm going to use a tall hump trany. cover to repair my floor. I already got the hump but it will need some work and the floor needs some work before it gets installed.
now I've got to sale the small hump carpet and get a new one for the tall hump, so if anyone needs the carpet let me know, new in the box and it's black.

6speed1972 · 02-07-2008, 09:11 AM

Thanks "slowtruck"

I appreciate the compliment. I busted my rear to get pictures on here before the snow and then no one commented. LOL. I am glad you liked it. It means a lot. Have a great day!

ProjectDD · 02-07-2008, 09:53 AM

Nice work, will be following this topic.

02-01-2008, 02:28 AM	#51
6speed1972 Registered User Join Date: Jan 2008 Location: Kansas Posts: 8	Re: T56 into a 67...... Good Deal. Just out of curiosity...with your 373 gears what is your 5th gear rpm (assuming you have a 1:1 5th gear and 15" tires) Thanks!

02-01-2008, 02:37 AM	#52
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: T56 into a 67...... I don't know! I just got the linkage working, and just tore the entire truck apart again to do some stuff with the frame. I have 15" tires right now, but the truck won't be roadworthy for at least another few weeks, at least. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

02-01-2008, 02:44 AM	#53
ryan913 Registered User Join Date: Jan 2008 Location: kenton, oh Posts: 183	Re: T56 into a 67...... Are you going to put the 4 speed tranny cover in it now? Looks like you doing a great job! Do you have a rear mounted fuel tank? Reason being is I dont think moving the engine back 2.75 inches would make much difference. Thats all.

02-01-2008, 08:25 AM	#54
6speed1972 Registered User Join Date: Jan 2008 Location: Kansas Posts: 8	Re: T56 into a 67...... These were really the best shots I could get of the linkage. Sorrry. I forgot that I used such a cheezy fastener, but hey I was only seventeen and was building this truck in my moms driveway on my own in highschool. HAHA. There were so many days I wanted to throw in the towel. I jumped into this with both feet with out testing the waters. On the picture of the Mcylinder mounted on the outside firewall::::: the "thing" wrapped up in a towel is my computer. Wasnt sure where to mount it at the time and its still there. I was just wanting to get the truck running. But anyway these are the pictures. I am totally inspired to get it all cleaned up and fix the little things like this. I got married and had kids and lost a lot of free time... Also threre is a pic of my extra T56 out of a 99 camero. I bought it with only 250 miles on it. Some idiot wrecked it brand new the same week he bought the car. I bought this in 2000 and took a draw from my work to buy it because of how hard at the time they were to find. Attached Images Last edited by 6speed1972; 02-01-2008 at 08:31 AM.

02-05-2008, 02:06 PM	#55
slowtruck Registered User Join Date: Feb 2007 Location: Cabot AR. Posts: 126	Re: T56 into a 67...... 6speed1972- that's a nice truck you got there... ryan913- I'm going to use a tall hump trany. cover to repair my floor. I already got the hump but it will need some work and the floor needs some work before it gets installed. now I've got to sale the small hump carpet and get a new one for the tall hump, so if anyone needs the carpet let me know, new in the box and it's black. Last edited by slowtruck; 02-05-2008 at 02:07 PM.

02-07-2008, 09:11 AM	#56
6speed1972 Registered User Join Date: Jan 2008 Location: Kansas Posts: 8	Re: T56 into a 67...... Thanks "slowtruck" I appreciate the compliment. I busted my rear to get pictures on here before the snow and then no one commented. LOL. I am glad you liked it. It means a lot. Have a great day!

02-07-2008, 09:53 AM	#57
ProjectDD Registered User Join Date: Jan 2008 Location: Airville, PA Posts: 19	Re: T56 into a 67...... Nice work, will be following this topic.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.