Edelbrock AVS2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C10_crazy · 08-04-2020, 10:58 AM

I'm thinking about buying and using the Edelbrock AVS2 carburetor on my C10.
The truck is just a street truck... not a high horsepower tire shredder. Anyone using the Edelbrock AVS2 carburetor? How do you like the carburetor? I would appreciate your thoughts and feedback.

siggyfreud · 08-04-2020, 11:56 AM

Ran one on our 69 El Camino with a 396. Runs well. Didn't have to do much tinkering with it out of the box really. This too was pretty much a stock motor, with the exception of an aftermarket intake and carb.

Portland68 · 08-04-2020, 04:23 PM

That's what I went on my rebuilt 350 for my K1500, just a street build with a Vortec top end. Minor adjustments required out of the box, right now it still has a bit of a high idle when I cold start it but that should be fixed with another turn or two of the adjustment screw. Seems to work well overall.

Minkota · 08-05-2020, 08:45 AM

Quote:

Originally Posted by C10_crazy

I'm thinking about buying and using the Edelbrock AVS2 carburetor on my C10.
The truck is just a street truck... not a high horsepower tire shredder. Anyone using the Edelbrock AVS2 carburetor? How do you like the carburetor? I would appreciate your thoughts and feedback.

I purchased one in April and it had a crack in the main body and it was a fight to get it replaced. the replacement does not work very well. i am probably going to purchase a Summit M2008 Carb since I have a few friends that use them and have had pretty good performance.

tim_mc · 08-05-2020, 10:09 AM

Love my AVS2, which replaced a 1405. Starts great. I leaned it out a bit (.098 main jets w/ 1446 rods (.068 x .042).

toolboxchev · 08-05-2020, 10:34 AM

My run of the mill every day carb is the original 1405, runs everyday, no issues. Going on 10 years now even with ethanol. Boy when am I going to have to break out that rebuild kit?

tinman_local2 · 08-07-2020, 10:14 PM

We have 2 of them and they are great. The throttle response is a great improvement over the 1406's. Very little tuning right out of the box. I'd buy 10 of them over one Holley. I'm sure there are a lot of Holley lovers out there, but I'm not one of them. The 1906 is the best street carb on the market right now.

08-04-2020, 10:58 AM	#1
C10_crazy Registered User Join Date: Apr 2018 Location: Casa Grande, AZ Posts: 25	Edelbrock AVS2 I'm thinking about buying and using the Edelbrock AVS2 carburetor on my C10. The truck is just a street truck... not a high horsepower tire shredder. Anyone using the Edelbrock AVS2 carburetor? How do you like the carburetor? I would appreciate your thoughts and feedback.

08-04-2020, 11:56 AM	#2
siggyfreud Registered User Join Date: Jun 2012 Location: Portland Posts: 1,330	Re: Edelbrock AVS2 Ran one on our 69 El Camino with a 396. Runs well. Didn't have to do much tinkering with it out of the box really. This too was pretty much a stock motor, with the exception of an aftermarket intake and carb. __________________ Current Build - Project "Ghost of Poseidon" 72 C10 Pro-touring build Previous Build - 66 GMC Pro-touring build. Sold.

08-04-2020, 04:23 PM	#3
Portland68 Registered User Join Date: Apr 2017 Location: Portland, Oregon Posts: 184	Re: Edelbrock AVS2 That's what I went on my rebuilt 350 for my K1500, just a street build with a Vortec top end. Minor adjustments required out of the box, right now it still has a bit of a high idle when I cold start it but that should be fixed with another turn or two of the adjustment screw. Seems to work well overall.

08-05-2020, 10:09 AM	#5
tim_mc Registered User Join Date: Jan 2019 Location: St Peters, MO Posts: 433	Re: Edelbrock AVS2 Love my AVS2, which replaced a 1405. Starts great. I leaned it out a bit (.098 main jets w/ 1446 rods (.068 x .042). Attached Images __________________ 1967 C20, 350 SBC w/Comp roller cam, 700R4 w/3.42 posi, PS, 4-wheel PDB, Old Air AC & GM Tilt column.

08-05-2020, 10:34 AM	#6
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: Edelbrock AVS2 My run of the mill every day carb is the original 1405, runs everyday, no issues. Going on 10 years now even with ethanol. Boy when am I going to have to break out that rebuild kit?

08-07-2020, 10:14 PM	#7
tinman_local2 Registered User Join Date: Jul 2015 Location: Smithton, Mo. Posts: 158	Re: Edelbrock AVS2 We have 2 of them and they are great. The throttle response is a great improvement over the 1406's. Very little tuning right out of the box. I'd buy 10 of them over one Holley. I'm sure there are a lot of Holley lovers out there, but I'm not one of them. The 1906 is the best street carb on the market right now.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.