The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 12-22-2018, 01:53 PM   #876
8man
Senior Member
 
Join Date: Sep 2017
Location: Bryan, Texas
Posts: 572
Re: S10 Swap how to

Well Merry Christmas to Skymangs, it sounds like Santa may be good to him this year.
__________________
1948 on a S10 Frame, with a 283
1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD
Build thread: Wife's 48 & 54 sort of
8man is offline   Reply With Quote
Old 12-22-2018, 06:01 PM   #877
skymangs
Senior Member
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Algona, IA
Posts: 1,730
Re: S10 Swap how to

Indeed he may, Just need all the pieces to fall in place!
skymangs is offline   Reply With Quote
Old 12-23-2018, 03:06 AM   #878
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 5,068
Re: S10 Swap how to

Quote:
Originally Posted by skymangs View Post
And thank you, the recovery is going well. in fact Iím hoping to make a pretty big announcement fairly soon. Iíll just leave it at that.

I pray for you pretty often, I have learned a ton!
__________________
the mass of men live lives of quiet desperation

New Project! Project: KECHI
my L35 4.3 4L60E S10 49 chevrolet 3100
http://67-72chevytrucks.com/vboard/s...d.php?t=782525


if there is a problem, I can have it.
joedoh is offline   Reply With Quote
Old 12-23-2018, 11:09 AM   #879
oldman3
Senior Member
 
oldman3's Avatar
 
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 6,731
Re: S10 Swap how to

Always thinking about you Chris, best to you now and in the upcoming year...Jim
oldman3 is offline   Reply With Quote
Old 12-23-2018, 08:54 PM   #880
skymangs
Senior Member
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Algona, IA
Posts: 1,730
Re: S10 Swap how to

Thanks Jim
skymangs is offline   Reply With Quote
Old 12-23-2018, 08:55 PM   #881
skymangs
Senior Member
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Algona, IA
Posts: 1,730
Re: S10 Swap how to

And thanks Joedoe
skymangs is offline   Reply With Quote
Old 02-12-2019, 08:07 PM   #882
Rustomod
Registered User
 
Rustomod's Avatar
 
Join Date: Dec 2018
Location: Shipshewana IN
Posts: 9
Re: S10 Swap how to

Here's a twist that I decided would provide a lot of bang for the buck: C4 Vette rearend. S10 owners do this but have to do a lot of narrowing. But the S10 frame really works good with all the mounting points. And the width is great for the AD truck. I did this first attempt by myself in about 14 hours including boxing of the frame rails. It looks like if you mount the batwing up snug against the bottom of the frame rail, it should sit about 3" lower than the stock S10 once the truck is assembled.
Attached Images
   
Rustomod is offline   Reply With Quote
Old 03-06-2019, 03:14 PM   #883
DC118us
Registered User
 
Join Date: Feb 2019
Location: Cambridge Ohio
Posts: 3
Re: S10 Swap how to

I'm new to the forum and have just begun reclaiming a well used 49 short bed and have poured over this thread as well as Hussey's "Albert" thread.

1st off, I simply love the details you both have given.

2nd, on the cab mount designs you both have created, I see a slight difference in front to rear mount heights and was curious. Skymangs your rear mounts are 3/4" taller above the frame than the front mounts, but Hussey's plans only show 1/2" difference. Is there some reason for this? Appears to me they both yield great stances. Skymangs seem like they would raise the rear bumper substantially over Hussey's

Again, thanks for the great details.
DC118us is offline   Reply With Quote
Old 03-06-2019, 04:05 PM   #884
skymangs
Senior Member
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Algona, IA
Posts: 1,730
Re: S10 Swap how to

Quote:
Originally Posted by DC118us View Post
I'm new to the forum and have just begun reclaiming a well used 49 short bed and have poured over this thread as well as Hussey's "Albert" thread.

1st off, I simply love the details you both have given.

2nd, on the cab mount designs you both have created, I see a slight difference in front to rear mount heights and was curious. Skymangs your rear mounts are 3/4" taller above the frame than the front mounts, but Hussey's plans only show 1/2" difference. Is there some reason for this? Appears to me they both yield great stances. Skymangs seem like they would raise the rear bumper substantially over Hussey's

Again, thanks for the great details.
Nope, thatís just the way I build em', not defending whether itís right or wrong; just different.
skymangs is offline   Reply With Quote
Old 03-06-2019, 04:07 PM   #885
DC118us
Registered User
 
Join Date: Feb 2019
Location: Cambridge Ohio
Posts: 3
Re: S10 Swap how to

Thanks Skymangs.
DC118us is offline   Reply With Quote
Old 03-15-2019, 08:34 PM   #886
Northern 52
Registered User
 
Join Date: Sep 2017
Location: Sudbury, Ontario
Posts: 34
Re: S10 Swap how to

I'm slowly plugging away on my 52 on an S10 frame. I am plumbing my transmission and decided to pick up an 8 x 14 cooler for it. It looks like it would fit nicely below the rad on the risers for the rad. I did the cross-member under the frame and sloped risers for the rad. Not knowing what the finished clearance would be but I am wondering if there will be enough air flow with the cooler in that location. From the pictures, the lower baffle below the rad to the grill looks like it might be at the half way point on the risers. My baffle is snowed into my shed and the way our weather is going, I may not be getting at it until August. I was thinking to keep the cooler below the rad to let the rad work better for the engine coolant without the extra hot air through it. Any information or advice would be appreciated.

Thanks.
Northern 52 is offline   Reply With Quote
Old 03-16-2019, 11:26 PM   #887
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 5,068
Re: S10 Swap how to

just cut some slots in your apron (baffle) and push it down, then with some triangles of steel make it funnel the air right through the cooler.

you need airflow over a cooler to work efficiently, I have seen otehr guys put them under the cab but that doesnt get enough airflow in my opinion. so getting it right in the air stream is going to work.

by the way, the air coming out of the trans cooler will usually be cooler than the air passing over the rad, unless you are really towing. I have a second trans cooler added to the rad cooler on my 2500HD and the trans temp is always under the coolant temp, unless I am towing or hauling, then they are the same temp (because of the cooler in the rad)

air to trans fluid coolers arent as efficient as water (coolant) to trans fluid, but if your rad doesnt have a cooler in it then you dont have a lot of choice. remember to get a plate style cooler, not a fin style, for max cooling, and also remember that good ones will have a waxstat to limit flow through the cooler till it warms up a bit, because you can have your trans fluid TOO cold.
__________________
the mass of men live lives of quiet desperation

New Project! Project: KECHI
my L35 4.3 4L60E S10 49 chevrolet 3100
http://67-72chevytrucks.com/vboard/s...d.php?t=782525


if there is a problem, I can have it.
joedoh is offline   Reply With Quote
Old 03-17-2019, 08:39 AM   #888
Northern 52
Registered User
 
Join Date: Sep 2017
Location: Sudbury, Ontario
Posts: 34
Re: S10 Swap how to

Some great points brought up. I think a transmission temperature gage has just been added to my instrumentation list.

Thank you.
Northern 52 is offline   Reply With Quote
Old 04-17-2019, 11:57 AM   #889
Wyattdog2
Registered User
 
Join Date: Aug 2017
Location: Puyallup, wa
Posts: 18
Re: S10 Swap how to

I am ordering some wheels 18 x 8 for the front of my 50 Chevy, s10 frame truck and wonder what back space you recommend.
Wyattdog2 is offline   Reply With Quote
Old 04-18-2019, 05:40 PM   #890
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 5,068
Re: S10 Swap how to

Quote:
Originally Posted by Wyattdog2 View Post
I am ordering some wheels 18 x 8 for the front of my 50 Chevy, s10 frame truck and wonder what back space you recommend.

I used 20x8 with 4" backspace and they looked perfect in the wheelwells and turned lock to lock without rubbing, even though it tucked most of the tire.

remember that backspace is different depending on wheel width, 4" of backspace is 5" of front space on an 8 inch wide wheel. (yes 4+5 is 9 inches wide, there are two 1/2 inch lips on each side of an 8" wide wheel) but 4 inches of backspace on a 7" wide wheel is what they call 0 offset (7+1, /2= 4) and is actually a positive offset on a 6 inch wide wheel (6+1, /2= 3.5 center so 12mm positive offset).

my point isnt to confuse you, just to say that 4" backspace on 8" wide is a mutually exclusive answer, dont buy a 9.5" wide wheel just because it has 4" backspace.
__________________
the mass of men live lives of quiet desperation

New Project! Project: KECHI
my L35 4.3 4L60E S10 49 chevrolet 3100
http://67-72chevytrucks.com/vboard/s...d.php?t=782525


if there is a problem, I can have it.
joedoh is offline   Reply With Quote
Old 04-19-2019, 09:38 AM   #891
skymangs
Senior Member
 
skymangs's Avatar
 
Join Date: Apr 2010
Location: Algona, IA
Posts: 1,730
Re: S10 Swap how to

Very well explained joedoe. Couldnít have put it better myself.
skymangs is offline   Reply With Quote
Old 06-05-2019, 03:23 PM   #892
50ChevyTruck
Registered User
 
Join Date: May 2019
Location: Alabama
Posts: 1
Lower grill support?

First of all great thread. Thanks for taking the time .

I read through all of the post and I didn't see anyone talk about the lower grill support. I think that is what it is called. It is a piece of sheet metal that mounts to the bottom of the grill and to the inner fenders. Are you guys just leaving it off? It appears to me that when I mount my inner fenders this pan will not mount because of the end of the S-10 front frame rails. Yes, I did cut my frame rails just in front of the steering box but there is not enough room for the pan.

If you did install it, pictures would be great.

Thanks
Rick
50ChevyTruck is offline   Reply With Quote
Old 06-06-2019, 11:14 AM   #893
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,534
Re: S10 Swap how to

I never install them. If using s10 you have to trim to fit. Guy named hussey on here built a truck named albert. he has a pictures of it done.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com
99 to Life is offline   Reply With Quote
Old 06-06-2019, 03:57 PM   #894
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 5,068
Re: S10 Swap how to

its the splash pan/air diverter for the radiator, if you live in a hot climate your truck will run a lot cooler with it installed.

here is what I did, in this picture you can see the pan trimmed for the frame horns



I cut a piece of thin abs (its actually kydex) using the UPPER grille closeout (with the latch) as the rough pattern then trimmed it to fit and screwed it down with some sheelmetal screws




thats a chevrolet, gmc is a little different, but the same plan, trim to fit then plastic.





the rad sits so high in the swap that you want to force air to go through the core. if there is any room to get around (or below) the rad, it will.
__________________
the mass of men live lives of quiet desperation

New Project! Project: KECHI
my L35 4.3 4L60E S10 49 chevrolet 3100
http://67-72chevytrucks.com/vboard/s...d.php?t=782525


if there is a problem, I can have it.
joedoh is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:35 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com