The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevy/GMC Suburbans & Panels Message Board > 1967 - 1972 Chevy/GMC Suburbans and PanelsProjects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-18-2012, 07:42 PM   #76
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

My floor has 4 holes. I'm probably going to put a 3 point harness on one side, like the one I had on my blazer, for my youngest little girl. I'll put a normal 3 point shoulder belt on the other side for my 7 year old.

The third row will be factory.
__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4

Last edited by 5150; 08-18-2012 at 08:22 PM.
5150 is offline   Reply With Quote
Old 08-18-2012, 08:20 PM   #77
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

Here's the type of harness I plan on using for my little girl. I figured it would be better then having the shoulder harness stretched across that far over to buckle her in.



__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 08-18-2012, 09:11 PM   #78
kev2809
low n' slo
 
kev2809's Avatar
 
Join Date: Mar 2009
Location: rosenberg, texas
Posts: 4,037
Re: Project Patina Burb

nice..i like the idea

whos truck is that in the pic?
__________________
67 1/2 ton Suburban - Project DRGNWGN. Build thread

-_--_--_ _________
_--_-_ -/____|__|__\__
,.,,,.,.,,.,|_O _______ O_]
kev2809 is offline   Reply With Quote
Old 08-18-2012, 09:34 PM   #79
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

That's my old blazer

__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 08-18-2012, 09:55 PM   #80
lolife99
Registered User
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,595
Re: Project Patina Burb

Bryan,... did you sell the blazer, or do you still have it?
__________________
Keith
Convert to disc brakes.
http://67-72chevytrucks.com/vboard/s...d.php?t=444823
WTB: Radio Delete Plates and clips.
lolife99 is offline   Reply With Quote
Old 08-18-2012, 09:58 PM   #81
Hart_Rod
*************

 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,218
Re: Project Patina Burb

Quote:
Originally Posted by 5150 View Post
My floor has 4 holes. I'm probably going to put a 3 point harness on one side, like the one I had on my blazer, for my youngest little girl. I'll put a normal 3 point shoulder belt on the other side for my 7 year old.

The third row will be factory.
Sounds like I have your seat and you have mine. Wanna trade seat bottoms? . There should be places to bolt the seatbelts to on those rear brackets.
Posted via Mobile Device
__________________
Rob - http://instagram.com/hart_rod
As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17

FOR SALE: DBW pedal bracket, Pedal adapter for LS trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=651123
FOR SALE: ChubTubz, Rear tubs for slammed trucks! http://67-72chevytrucks.com/vboard/s...d.php?t=675754
FOR SALE: Hood Brackets, Bolt in hood brackets! http://67-72chevytrucks.com/vboard/s...d.php?t=679945


1969 SuperBurb - 5.3/Magnacharger..http://67-72chevytrucks.com/vboard/s...d.php?t=200387
1968 Farm truck: LS3/6L80/TVS1900: http://67-72chevytrucks.com/vboard/s...d.php?t=358692
1968 SWB - SHIFTED: PB Xtreme DM/LS1/Dakota Digital/AccuAir/Vintage Air/...http://67-72chevytrucks.com/vboard/s...d.php?t=551258
1948 5 Window Chevy http://67-72chevytrucks.com/vboard/s...=122164&page=3
FAQ: http://67-72chevytrucks.com/vboard/f...play.php?f=220
Hart_Rod is offline   Reply With Quote
Old 08-18-2012, 09:58 PM   #82
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

No, I sold it last October. We had another little girl, Lizzy, last August. Between my small business doing really bad and hospital bills started coming in, I sold it. I didn't miss it until April
__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 08-18-2012, 10:01 PM   #83
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

Looking back at the original post in this thread, you can see the original second row seat that I gave away had the four brackets on the rear. I'll probably use one of them to bolt the 3 point harness to.
__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 08-18-2012, 10:20 PM   #84
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

Here's my hatch that I picked up from the owner of SOKY Classics



__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 08-25-2012, 02:23 PM   #85
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

Got alot of the wiring done on the air ride today. I'm running Slams in the front and the PO gave me these HUGE Goodyear bags that I'm using on the rear. I believe they came from a bus. I also am using the older style Ride Tech Digital Pressure sensor and 4 sensors that I got from smbrouss70.

I mounted the tank and the compressor. Also put the valves together with pressure sensors and mounted them in the best locations. Wired everything up, but I don't have a battery in it. I've had it on schrader valves for awhile now.

I still have to wire up the switch box and put some 90 degree fittings on the rear, wire up the compressor with relay, and mount the water trap(I just ordered it).
__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 09-02-2012, 07:06 PM   #86
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

okay, finished up the wiring today on the air bags except for wiring up the switch box. I needed a few more connectors.

I had some help from my daughter, Halen, who loves to work on it with me.



Dropped the drive shaft and got a measurement on how much to shorten it for it to fit the 4L60E.
__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 09-04-2012, 08:57 PM   #87
502ms
Registered User
 
502ms's Avatar
 
Join Date: Aug 2011
Location: Atlanta, GA
Posts: 1,527
Re: Project Patina Burb

Very nice!
Posted via Mobile Device
__________________
Best Regards,
Leon M.
502ms is offline   Reply With Quote
Old 09-27-2012, 02:34 AM   #88
oldblue1968chevy
Grandpa in the rustmobile...
 
oldblue1968chevy's Avatar
 
Join Date: Nov 2008
Location: Spokane WA/Viola TN
Posts: 11,427
Re: Project Patina Burb

I think I have you on FB Are you bryan?

Anyways, cool build Im following along.
__________________
John

Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck)
http://67-72chevytrucks.com/vboard/s...d.php?t=317684

Grams 53-1953 Chevrolet Belair
http://67-72chevytrucks.com/vboard/s...=1#post4327784

1969 Chevy C10 Shortbed 4.5/6?" Frame off resto
http://67-72chevytrucks.com/vboard/s...d.php?t=548136

1999 Toyota Tacoma 4x4
oldblue1968chevy is offline   Reply With Quote
Old 11-10-2012, 09:54 PM   #89
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

Got most of the fuel line ran today. Still have to install the tank, but all the line has been ran to the rear of the burb.
__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 11-29-2012, 08:15 PM   #90
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

Got the tank in and wired up. Got it off jack stands for the first time in a couple of months.

Still messing with the new wiring harness. It's an 21 circuit EZ Wiring harness and it's a bit overwhelming to say the least.
Posted via Mobile Device
__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 12-31-2012, 12:28 PM   #91
jeffg1010
Senior Member
 
jeffg1010's Avatar
 
Join Date: Aug 2010
Location: Mooresville, NC
Posts: 2,660
Re: Project Patina Burb

Subscribed. Cant wait to see it on the Power Tour
Posted via Mobile Device
__________________
Jeff
1972 Blazer CST 2wd- My son Sam's Project "S" Project "S"
1970 Suburban - SOLD "One Bad Burb" Photobucket Album
1986 C30 Crewcab - 63K original miles, original paint


Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...
jeffg1010 is offline   Reply With Quote
Old 01-01-2013, 06:19 PM   #92
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

Got a few things done today. I got my carpet kit in from Brother's this week also. I'm kind of collecting parts as of late.

Cleaned up some of the metal interior trip today with the bench grinder. I slapped the wire wheel attachment on it and cleaned most of the surface rust that was on them.
__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 01-01-2013, 06:30 PM   #93
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

I also saw another problem I'm going to have to deal with due to the PO shaving certain things.

I have a good hatch, but the push button has been shaved so I'm not sure how I'm going to get it open from the outside.
__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 01-01-2013, 08:02 PM   #94
Rusbuilt
Registered User
 
Rusbuilt's Avatar
 
Join Date: Mar 2012
Location: Knoxville, TN
Posts: 5,404
Re: Project Patina Burb

Got any progress pics Bryan?
Rusbuilt is offline   Reply With Quote
Old 01-01-2013, 09:38 PM   #95
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

Here are a few Rus, still fighting with the wiring harness and need someone with a few welding skills. Here's a few shots I just took. You can see the button is shaved on the rear and what it looks like inside.









Posted via Mobile Device
__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 01-01-2013, 09:53 PM   #96
Rusbuilt
Registered User
 
Rusbuilt's Avatar
 
Join Date: Mar 2012
Location: Knoxville, TN
Posts: 5,404
Re: Project Patina Burb

Looking good! What are you needing welded?
Rusbuilt is offline   Reply With Quote
Old 01-01-2013, 11:43 PM   #97
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

Oh, I need to make a gas door and make two tail lights.
Posted via Mobile Device
__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 01-02-2013, 08:03 AM   #98
Rusbuilt
Registered User
 
Rusbuilt's Avatar
 
Join Date: Mar 2012
Location: Knoxville, TN
Posts: 5,404
Re: Project Patina Burb

Ah ok. I can help with some welding!
Rusbuilt is offline   Reply With Quote
Old 01-02-2013, 12:34 PM   #99
5150
C10 Club Tennessee
 
5150's Avatar
 
Join Date: Mar 2003
Location: White House, TN 37188
Posts: 8,246
Re: Project Patina Burb

Well, maybe we can hook up some time soon.
Posted via Mobile Device
__________________
Bryan

www.gmtruckshow.com

2018 Southeastern ALL Chevy/GMC Truck Nationals July 15th Goodlettsville, TN

Project "Andes"-Halen's First Truck

Project: Patina Burb

for he is Godís servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out Godís wrath on the wrongdoer. Romans 13:4
5150 is offline   Reply With Quote
Old 01-02-2013, 02:13 PM   #100
Rusbuilt
Registered User
 
Rusbuilt's Avatar
 
Join Date: Mar 2012
Location: Knoxville, TN
Posts: 5,404
Re: Project Patina Burb

Sounds good to me. I need to get up that way to show you that cab I have in Cross Plains anyways.
Posted via Mobile Device
Rusbuilt is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com