1967 c10 11,200mi 327 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevemall · 01-08-2019, 01:57 PM

Very nice keep that baby.
Man even the trim is good.

vinro · 01-08-2019, 10:48 PM

Curious what the spec size is on those tires?
I can read the Custom 428 A/S All_Season Radial Tire
But wonder if they are 225/75R15
Would like to get the same thing for my 67.

* * *

And did that come with stainless/chrome dog dish caps?

**Thrill4130** · 01-08-2019, 11:21 PM

Quote:

Originally Posted by vinro

Curious what the spec size is on those tires?
I can read the Custom 428 A/S All_Season Radial Tire
But wonder if they are 225/75R15
Would like to get the same thing for my 67.

* * *

And did that come with stainless/chrome dog dish caps?

235/75 and I have the stainless caps I just wanted to make sure the brakes are adjusted before I put them on
Posted via Mobile Device

72GreenMonster · 01-09-2019, 01:49 AM

Very nice and original!

Keeping her?

**Thrill4130** · 01-09-2019, 11:38 AM

Quote:

Originally Posted by 72GreenMonster

Very nice and original!

Keeping her?

Yeah definitely until I swap engine into shortbed. Hopefully doing that this weekend. Haven’t totally decided I kinda bought it as a backup truck while I swap engine and maybe paint shortbed eventually.
Posted via Mobile Device

**Thrill4130** · 03-13-2019, 09:05 PM

Put the hubcaps on today. Adjusting floats tonight and hoping the trans module that was full of fluid was the reason trans was struggling. Hunting down leaks but hopefully drive it a little tomorrow. If anyone knows the exact float measurements for a 4jet (not a quadrajet) floats it would be appreciated. Everything I’m finding is for the quadrajet. Original 327 4 barrel.
Posted via Mobile Device

**Getter-Done** · 03-13-2019, 10:26 PM

Try this link:
https://www.carburetor-parts.com/Roc...al_ep_349.html

.

**Thrill4130** · 03-13-2019, 11:32 PM

Quote:

Originally Posted by Getter-Done

Try this link:
https://www.carburetor-parts.com/Roc...al_ep_349.html

.

Thank you that’s what I was looking for.
Posted via Mobile Device

**Getter-Done** · 03-13-2019, 11:48 PM

Your Welcome
35 years ago
I was watching this Gentleman use a
(white 90 degree square ) to set the float level.
He could make a Carb. work like it Should.
Thanks for your Question.
That bought back a Lot of Good Memories.

.

**Thrill4130** · 05-26-2019, 04:26 PM

Well back to working on transmission. I pulled governor but piston moves freely so on to the next step. Bought a gasket kit so this week I’m going to explore valve body and see if I can find what’s stuck. Won’t shift out of first.
Posted via Mobile Device

**Thrill4130** · 11-24-2019, 08:47 PM

I finally got around to putting up videos on youtube under "Show Me Trucks”. I learned most of my modifications off this site so I hope you all enjoy. Builds on this truck "Woody", my 1967 Chevy C10 5.3l shortbed and custom camper shell will all be on there. Thanks for all the help you guys have given me.

**Getter-Done** · 11-24-2019, 09:09 PM

Just Subbed to your Channel.

.

01-08-2019, 01:57 PM	#26
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: 1967 c10 11,200mi 327 Very nice keep that baby. Man even the trim is good. __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

01-08-2019, 10:48 PM	#27
vinro Registered User Join Date: Jan 2018 Location: america Posts: 99	Re: 1967 c10 11,200mi 327 Curious what the spec size is on those tires? I can read the Custom 428 A/S All_Season Radial Tire But wonder if they are 225/75R15 Would like to get the same thing for my 67. * * * And did that come with stainless/chrome dog dish caps?

01-09-2019, 01:49 AM	#29
72GreenMonster Registered User Join Date: Dec 2018 Location: Los Angeles Posts: 53	Re: 1967 c10 11,200mi 327 Very nice and original! Keeping her? __________________ 72 GMC Sierra 2500

03-13-2019, 09:05 PM	#31
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	Put the hubcaps on today. Adjusting floats tonight and hoping the trans module that was full of fluid was the reason trans was struggling. Hunting down leaks but hopefully drive it a little tomorrow. If anyone knows the exact float measurements for a 4jet (not a quadrajet) floats it would be appreciated. Everything I’m finding is for the quadrajet. Original 327 4 barrel. Posted via Mobile Device Attached Images

03-13-2019, 10:26 PM	#32
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,726	Re: 1967 c10 11,200mi 327 Try this link: https://www.carburetor-parts.com/Roc...al_ep_349.html . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

03-13-2019, 11:48 PM	#34
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,726	Re: 1967 c10 11,200mi 327 Your Welcome 35 years ago I was watching this Gentleman use a (white 90 degree square ) to set the float level. He could make a Carb. work like it Should. Thanks for your Question. That bought back a Lot of Good Memories. . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

05-26-2019, 04:26 PM	#35
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	Well back to working on transmission. I pulled governor but piston moves freely so on to the next step. Bought a gasket kit so this week I’m going to explore valve body and see if I can find what’s stuck. Won’t shift out of first. Posted via Mobile Device

11-24-2019, 08:47 PM	#36
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 190	Re: 1967 c10 11,200mi 327 I finally got around to putting up videos on youtube under "Show Me Trucks”. I learned most of my modifications off this site so I hope you all enjoy. Builds on this truck "Woody", my 1967 Chevy C10 5.3l shortbed and custom camper shell will all be on there. Thanks for all the help you guys have given me. Attached Images Last edited by Thrill4130; 11-28-2019 at 05:07 PM.

11-24-2019, 09:09 PM	#37
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,726	Re: 1967 c10 11,200mi 327 Just Subbed to your Channel. . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.