Project: Recycle

[watahyahknow]

Originally Posted by SCOTI

b) GF's family owns a precision sheetmetal co so I can get the steel for cheap; c) budget & easy.

do they by any chance have a waterjetcutter , that would make the choice verry eazy

[SCOTI]

Originally Posted by watahyahknow

do they by any chance have a waterjetcutter , that would make the choice verry eazy

No waterjet but they have laser equipment. It's also a whole different ballgame grabbing a piece of drop material off the shelf myself vs. getting an employee to make me a part/some parts. I just can't ask that of them.

[N2TRUX]

Scot- Would it be easier to buy a universal weld on upper bracket? It might give you more travel, and save some time.

I got my shocks yesterday, and I am worried they are not long enough. With the truck in the air and the suspension fully extended it's about 7/8" too short.

[SCOTI]

Originally Posted by N2TRUX

Scot- Would it be easier to buy a universal weld on upper bracket? It might give you more travel, and save some time.

I got my shocks yesterday, and I am worried they are not long enough. With the truck in the air and the suspension fully extended it's about 7/8" too short.

Did you use the relocators supplied w/the Ride Tech front kit?

[N2TRUX]

Originally Posted by SCOTI

Did you use the relocators supplied w/the Ride Tech front kit?

There were no relocators supplied. I don't think that is necessary with the new arms.

[SCOTI]

Originally Posted by N2TRUX

There were no relocators supplied. I don't think that is necessary with the new arms.

They list a p/n for upper shock brackets on the front Cool Ride kits for 63-72's & 73-87's. I wonder what the deal is there?

For now, my solution will be to chop off the existing dbl shear upper tabs from my fabbed brackets & create new, taller versions. Since the 'base' of the bracket bolts to both the top & side of the frame, I can get that part accomplished & weld the tabs on later when final ride height is established (verified).

[Painter D]

Any new progress?

[ratty 46]

Looking good IMO.

Ratty 46

[Captainfab]

Looks good to me as well.

[N2TRUX]

Nice design work Scot.

[aggie91]

Looks Good. I wish I could work on mine...

[SCOTI]

Well... One step foward, 2 steps back. I worked on the front shock brackets Friday after work & Sun afternoon, but ran into issues.

Because each of the brackets is hand cut & trimmed independently, there were subtle variations on each. Those variations were causing problems w/alignment or positioning when trying to determine the optimum placement.

I could tweak their position, but then when I placed the top covers on them, the covers were not consistent from side to side & looked like butt (not very square & didn't 'flow' well). I was going to try & have my GF's company laser cut some consistent brackets based on my template but they're busy & I didn't want to be a wrench in the works. Instead, I'm going to use some of the RideTech 'universal' weld-on units & I'll tweak from there. They will be a more consistent starting point so I'll end up w/a better finished result.

So.... Sunday evening I played around w/my vent window frames. I wound up grinding the 2 rivets off the pivot bracket which will allow installation of the window frame seal. I used small beveled seat machine screws in place of rivets for re-assembly (just verifying they'll do the job). I still want to blast the vent window frames & get them in black epoxy before re-assembling everything.

After that, I started making a reinforcement plate for the gauge lens I used in the modifed cluster. The OE lexan/plastic gauge lens was a bit flimsy w/all the holes poked in it. When installed in the housing, it was 'ok', but I felt it could be improved upon (cheaply). I used some steel (0.060 I think) & made a backing plate for the lens. I'll panel bond the 2 together & it should work well (seems more solid just flexing them when not installed). A little more weight, but not so much it will be an issue.

[aggie91]

Its been 2 weeks, anything new? Are you still trying to make the Goodguys show at TMS Oct 1-3?

[SCOTI]

Originally Posted by aggie91

Its been 2 weeks, anything new? Are you still trying to make the Goodguys show at TMS Oct 1-3?

I just got the Ride Tech shock brackets in today (I actually just opened the shipping box on the couch while watching the 2nd game tonight). I had arranged to have them brought to the GG's Kansas show last week. I inquired about them @ the show & although they did remember to bring them, he left them w/his personal belongings in the 'shop' dually . . ..... which was apparently being used by Bretts wife for a 'shopping' excursion. By the close of the show Sat, they still were not available. He suggested I return to get them on Sunday @ some point but we bounced back to DFW bright & early Sunday morning....

While I'd love to drive this truck into the FtWorth event, I know what it takes to get one together & it's highly unlikely. I'll still be @ the show, sans the 64.

I did finish the gauge cluster. It's very solid now so the steel 'backing plate' was a good decision.

[watahyahknow]

that sucks i myself ruined a 4 day old low profile tire and a rim on a pothole once and the one responsible for maintaining that road paid the costs for replacing them ..... this was in europe
i think you can get the construction company for the road or the city lyable for the damage as they didnt closed the road or made an alternative for that road to youre company , might be hard to prove the road responsible for the damage unless you make pictures .
as long as you stay reasonable in youre expences they shouldnt give you too hard a time

[Painter D]

Well that sucks. I know what you're sayin though ,that construction going on over in your neck of the woods is pretty brutal.

[SCOTI]

Well.... I ordered 1ea pass/driver manifolds for the 74 & got 2 pass units. Since that was definitely the worse of the two, I swapped it out & I'm back in business. The driver side isn't leaking for now but it definitely is cracked.

I'll be working on shock mounts this weekend (Sat).

[watahyahknow]

they can be welded with a special weldingrod , i heared sumting of a vibrating table where you mount it on during welding and let it cool inside sand to keep the moleculair structure close to cast iron and prevent stresscracks

[SCOTI]

Originally Posted by watahyahknow

they can be welded with a special weldingrod , i heared sumting of a vibrating table where you mount it on during welding and let it cool inside sand to keep the moleculair structure close to cast iron and prevent stresscracks

I would just swap to headers before that.... just didn't want to go that route @ this time. Patch it & return my focus to the 64!

[SCOTI]

I got some time in today to work on the front shock mounts. I spent about half of that time running back & forth between local auto-part joints, Home Depot, & my house. Frustrating to say the least but I pushed on....

The shocks are C10 spec'd Bilsteins, 15.5" extended length w/5" of travel. I set them @ 13.5" length @ 6.5" bag height which = my ride height. This should allow 3" compression w/o fear of bottoming out yet still allow the bag to 'air-out' if desired.

I cut off the dbl shear shock brackets I had previously welded on the Ride tech lower a-arms (I was concerned the upper/lower shock eye orientation @ opposing 90° angles would cause a binding condition). I welded some 'new' shock tabs on the side/top of the a-arms (just like how they sell them now). After some intial measurements, I trimmed the universal Ride Tech upper mounts to yield the correct distance between the upper & lower mounts while clearing the upper a-arm shaft hardware & the frame.

In these pics, I haven't welded the upper mount yet because I'm still working on the driver side. I want to ensure both sides are the same (placement, angle, & appearance) before final welding of the upper portion. I still need to do the fit & finish on the driver side upper mount & then I can weld both sides up.

I also picked up some vent window setting tape @ the swap meet yesterday to start reassembling the vent windows & got my Hush Mat 'kit' for the cab.

I think I nailed my target dimensions for the shock length looking @ the last pic . . .....

[72BlckButy]

Nice work SCOTI!

[VA72C10]

[MattA]

The new lower mount looks much better. Good work.

[N2TRUX]

Progress is good bro. Glad to see you got this obstacle resolved.

[Painter D]

Nice work