85 burb meets 6.0 lq4 - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68GMCCustom · 07-04-2010, 07:41 PM

...probably one of the 1st 50 in the country. I was beginning to think I would have to buy a single plane from GMPP or the Victor Jr...then this one finally came out.

85burb · 07-06-2010, 01:01 AM

What size carb spacer should i get? 1 or 2 inch?

68GMCCustom · 07-06-2010, 02:03 PM

Hard to say...different motors work better with lots of spacer...others don't want any at all. I had run my 383 w/o one...but the fuel pressure gauge was hitting the valve cover...so I added a 1" spacer (w/open insert) to get the gauge of the vc...and the motor liked it.

85burb · 07-06-2010, 03:26 PM

Hmmm. I am not really sure now that i am not going to get that fancy one if i actually need one. I think i will just skip if for now. There are way too many types and sizes to choose with out having it running already. I will pick on out later if i think it needs help. Does GMPP make duel plain for regular heads or is the edelbrok the only option?

68GMCCustom · 07-06-2010, 06:57 PM

nope....just Edelbrock. But then...I think maybe GM makes more e.f.i. intakes.

85burb · 07-06-2010, 07:52 PM

Ya i guess they may. about to put order in for intake.

85burb · 07-06-2010, 09:55 PM

YAY my maniflod, carb studs, intake bolts, and gaskets for intake are ordered and will be here the 8th-9th.

MONTEZ · 07-06-2010, 10:34 PM

Did your 6.0 come with an intake and throttle body? I have one that has the wrong throttle body. I am willing to buy or trade if you have the one I need.

85burb · 07-06-2010, 11:26 PM

No sorry. I have everything but the TB. It is also for sale.

jgh64pkup · 07-07-2010, 01:08 AM

how much did you give for the l92s?

MONTEZ · 07-07-2010, 07:47 AM

Quote:

Originally Posted by 85burb

No sorry. I have everything but the TB. It is also for sale.

Which intake is it? Does it have 3 or 4 bolts to hold the throttle body on? I have the 3 bolt and need the 4. I have a 4 bolt car manifold available, but would rather use the truck manifold. So pretty much I have a harness,intake manifold, throttle body,fuel rails and injectors that I wont be using because they are all wrong for what I want to do. If you have any of the ones for the 4 bolt I will trade or buy.

MONTEZ · 07-07-2010, 09:32 AM

Just found your for sale thread. You have the same one I do. I'm in Tyler all the time, maybe we can get a meet and greet together for the Tyler area sometime.

68GMCCustom · 07-07-2010, 02:05 PM

Quote:

Originally Posted by MONTEZ

Which intake is it? Does it have 3 or 4 bolts to hold the throttle body on? I have the 3 bolt and need the 4. I have a 4 bolt car manifold available, but would rather use the truck manifold. So pretty much I have a harness,intake manifold, throttle body,fuel rails and injectors that I wont be using because they are all wrong for what I want to do. If you have any of the ones for the 4 bolt I will trade or buy.

answered your PM...
My intake is for the genIV heads...L92/LS3 and it has DBW.

68GMCCustom · 07-07-2010, 02:06 PM

Quote:

Originally Posted by 85burb

YAY my maniflod, carb studs, intake bolts, and gaskets for intake are ordered and will be here the 8th-9th.

thats quick!

85burb · 07-07-2010, 07:30 PM

Quote:

Originally Posted by MONTEZ

Just found your for sale thread. You have the same one I do. I'm in Tyler all the time, maybe we can get a meet and greet together for the Tyler area sometime.

Would love to. I have been trying to get a 4x4 event going with no avail. But all chevys rock so we should try i guess.

85burb · 07-07-2010, 07:32 PM

Quote:

Originally Posted by 68GMCCustom

thats quick!

Ya got to love summit. The hole order shipped for 13 bucks too. That and amazon is the only place i have got my stuff so far. All orders were perfict.

85burb · 07-08-2010, 08:37 PM

My box was at door today at 10 am. Ordered it on tuesday night at 8 pm. That is amazing. It came from gorgea(spelling i am sure is off) too. Should have pics monday morning. When i get home.

68GMCCustom · 07-08-2010, 09:00 PM

finished degreasing the front crossmember, trans crossmember, lower control arms, and trailing arms, and the coil spring/shock mount crossmember. Now I'll hit 'em with a wire brush and some POR15 paint and then put in the new bushings. The I'll finally be able to install the front and trans crossmembers...and finally put the motor in the frame! I guess its time to start my '68 GMC LSx "build" thread since I'm through with disassembly.

sold my VVT stuff so there's no going back to EFI now.

85burb · 07-08-2010, 09:12 PM

Good deal. Wish i could sell my stuff. Not even one hit on my selling add. Thats ok. Hey you dont know of any blower maniflods for these do you? Like to put 6-71 on. That would rock.

68GMCCustom · 07-08-2010, 10:11 PM

If you go efi there are several options...not sure about carb'd options for LSx motors though.

okieraptor · 07-08-2010, 10:37 PM

No 671 or 871 manifolds to date. Like 68 said there is several for the fi models like the magnam or magnison(I'm sure those ain't spelled right), vortex and ati procharger. A 671 would be cool on one of these though.

jgh64pkup · 07-08-2010, 10:50 PM

http://www.ls1tech.com/forums/forced...-427-nova.html

jgh64pkup · 07-08-2010, 10:51 PM

sorry for the pic size i just found it on google images

68GMCCustom · 07-08-2010, 10:55 PM

well it looks like BDS (or somebody else) has a adapter plate for LS1 style heads? Or do they also support the LS3 style heads?

85burb · 07-08-2010, 11:09 PM

just fell smooth out of my chair.

07-04-2010, 07:41 PM	#126
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 85 burb meets 6.0 lq4 ...probably one of the 1st 50 in the country. I was beginning to think I would have to buy a single plane from GMPP or the Victor Jr...then this one finally came out. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

07-06-2010, 01:01 AM	#127
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: 85 burb meets 6.0 lq4 What size carb spacer should i get? 1 or 2 inch? __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

07-06-2010, 02:03 PM	#128
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 85 burb meets 6.0 lq4 Hard to say...different motors work better with lots of spacer...others don't want any at all. I had run my 383 w/o one...but the fuel pressure gauge was hitting the valve cover...so I added a 1" spacer (w/open insert) to get the gauge of the vc...and the motor liked it. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

07-06-2010, 03:26 PM	#129
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: 85 burb meets 6.0 lq4 Hmmm. I am not really sure now that i am not going to get that fancy one if i actually need one. I think i will just skip if for now. There are way too many types and sizes to choose with out having it running already. I will pick on out later if i think it needs help. Does GMPP make duel plain for regular heads or is the edelbrok the only option? __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

07-06-2010, 06:57 PM	#130
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 85 burb meets 6.0 lq4 nope....just Edelbrock. But then...I think maybe GM makes more e.f.i. intakes. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

07-06-2010, 07:52 PM	#131
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: 85 burb meets 6.0 lq4 Ya i guess they may. about to put order in for intake. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

07-06-2010, 09:55 PM	#132
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: 85 burb meets 6.0 lq4 YAY my maniflod, carb studs, intake bolts, and gaskets for intake are ordered and will be here the 8th-9th. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

07-06-2010, 10:34 PM	#133
MONTEZ Registered User Join Date: May 2010 Location: Nacogdoches,Texas Posts: 330	Re: 85 burb meets 6.0 lq4 Did your 6.0 come with an intake and throttle body? I have one that has the wrong throttle body. I am willing to buy or trade if you have the one I need. __________________ Smoke Tires, not Drugs

07-06-2010, 11:26 PM	#134
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: 85 burb meets 6.0 lq4 No sorry. I have everything but the TB. It is also for sale. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

07-07-2010, 01:08 AM	#135
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 85 burb meets 6.0 lq4 how much did you give for the l92s? __________________ Gage 1967 C10 Shortbed Stepside

07-07-2010, 09:32 AM	#137
MONTEZ Registered User Join Date: May 2010 Location: Nacogdoches,Texas Posts: 330	Re: 85 burb meets 6.0 lq4 Just found your for sale thread. You have the same one I do. I'm in Tyler all the time, maybe we can get a meet and greet together for the Tyler area sometime. __________________ Smoke Tires, not Drugs Last edited by MONTEZ; 07-07-2010 at 09:34 AM.

07-08-2010, 08:37 PM	#142
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: 85 burb meets 6.0 lq4 My box was at door today at 10 am. Ordered it on tuesday night at 8 pm. That is amazing. It came from gorgea(spelling i am sure is off) too. Should have pics monday morning. When i get home. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

07-08-2010, 09:00 PM	#143
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 85 burb meets 6.0 lq4 finished degreasing the front crossmember, trans crossmember, lower control arms, and trailing arms, and the coil spring/shock mount crossmember. Now I'll hit 'em with a wire brush and some POR15 paint and then put in the new bushings. The I'll finally be able to install the front and trans crossmembers...and finally put the motor in the frame! I guess its time to start my '68 GMC LSx "build" thread since I'm through with disassembly. sold my VVT stuff so there's no going back to EFI now. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

07-08-2010, 09:12 PM	#144
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: 85 burb meets 6.0 lq4 Good deal. Wish i could sell my stuff. Not even one hit on my selling add. Thats ok. Hey you dont know of any blower maniflods for these do you? Like to put 6-71 on. That would rock. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

07-08-2010, 10:11 PM	#145
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 85 burb meets 6.0 lq4 If you go efi there are several options...not sure about carb'd options for LSx motors though. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken



Register or Log In To remove these advertisements.

07-08-2010, 10:37 PM	#146
okieraptor Registered User Join Date: Mar 2010 Location: northern texas, southern oklahoma Posts: 144	Re: 85 burb meets 6.0 lq4 No 671 or 871 manifolds to date. Like 68 said there is several for the fi models like the magnam or magnison(I'm sure those ain't spelled right), vortex and ati procharger. A 671 would be cool on one of these though. __________________ 82 chevy longbed(grey truck)first truck when i was 15!

07-08-2010, 10:50 PM	#147
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 85 burb meets 6.0 lq4 http://www.ls1tech.com/forums/forced...-427-nova.html __________________ Gage 1967 C10 Shortbed Stepside

07-08-2010, 10:51 PM	#148
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 85 burb meets 6.0 lq4 sorry for the pic size i just found it on google images __________________ Gage 1967 C10 Shortbed Stepside

07-08-2010, 10:55 PM	#149
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: 85 burb meets 6.0 lq4 well it looks like BDS (or somebody else) has a adapter plate for LS1 style heads? Or do they also support the LS3 style heads? __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken Last edited by 68GMCCustom; 07-08-2010 at 10:59 PM.

07-08-2010, 11:09 PM	#150
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: 85 burb meets 6.0 lq4 just fell smooth out of my chair. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

Register or Log In To remove these advertisements.