AZ 72 Cheyenne for parts - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FL71C10 · 11-26-2012, 09:39 PM

I'll pass on the vent windows.

**t korinek** · 11-30-2012, 03:59 AM

Pics & measurements of the spring hangers

eightbanger · 11-30-2012, 01:37 PM

Hi, are the rear bumper brackets gone?

Thanks.

**t korinek** · 11-30-2012, 02:00 PM

The bumper brackets are gone.
I have new aftermarket sport bumper bracket sets for $60.
Thanks,
Tom

eightbanger · 11-30-2012, 06:46 PM

Tom, i'm worried about the quality and fitment of the aftermarket brackets......are they ok?

Camper Special 396 · 12-04-2012, 12:13 AM

Tom, Thanks for the pics and measurements on the spring hangers. I am learning a lot about them (learning the hard and expensive way). Most are year specific. It looks like these are the same as 70 and 71. I need 68 or 69. On the 68 and 69 they locate the springs closer to the frame. I have a 68 and a 69 truck and the springs are less than 2 inches from the frame, while on the 70, 71, & 72 they are about 3 inches from the frame.

The 68 is also a cast iron part while the 69 is stamped steel. I just ordered a set of 69's from Krazy Ray. Sorry I could not make these work

My72BB · 12-31-2012, 07:34 PM

Tom,

I can't tell if the BB Shroud is still available? It looks good in pics...If still available I'm interested pending your description.

Hope you are well...Happy New Year!

Thanks, Alan

My72BB · 12-31-2012, 07:47 PM

Dis-regard on Fan Shrould...I found one a bit closer.

Thanks...Alan

tdkosta · 01-06-2013, 08:20 PM

Is the driver's side fender still available, and if so what can you let it go for locally? Thanks ~ Tony

**t korinek** · 01-06-2013, 11:38 PM

tdkostka driver fender went to Oregon last month, I have some others, not quite as nice or a new NOS GM one in the box for $500.

BB fan shroud was sold a while back.
Thanks,
Tom

tdkosta · 01-07-2013, 12:50 AM

I'll have to drop by some Saturday to see if you have anything better than what I have in there now but I am not in a hurry, thanks.

jhiggy94 · 01-12-2013, 07:11 PM

I need the rear frame mounted shock supports. I have a 3/4 ton four wheel drive and im not sure if they would be the same as the two wheel drive. If they are I would take them

**t korinek** · 01-12-2013, 07:15 PM

Jhiggy94, what year do you have? these are not the same, but I may have them.

jhiggy94 · 01-13-2013, 11:10 AM

It is a 72

**t korinek** · 01-13-2013, 06:28 PM

J Higgy I have a pair of them $48 shipped they are 4x4 specific & in good shape
Thanks,
Tom

jhiggy94 · 01-14-2013, 11:14 AM

Ill take them, pm me your payment info and ill pay you through paypal

11-26-2012, 09:39 PM	#176
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,506	Re: 72 Cheyenne for parts I'll pass on the vent windows. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

11-30-2012, 03:59 AM	#177
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 72 Cheyenne for parts Pics & measurements of the spring hangers Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

11-30-2012, 01:37 PM	#178
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: 72 Cheyenne for parts Hi, are the rear bumper brackets gone? Thanks. __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

11-30-2012, 02:00 PM	#179
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 72 Cheyenne for parts The bumper brackets are gone. I have new aftermarket sport bumper bracket sets for $60. Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

11-30-2012, 06:46 PM	#180
eightbanger 454 MAKES IT ROAR Join Date: Jan 2008 Location: Essex, U.K Posts: 2,701	Re: 72 Cheyenne for parts Tom, i'm worried about the quality and fitment of the aftermarket brackets......are they ok? __________________ Nigel. An American living in a British body. 1971 Chevy Cheyenne 10 454 "In a time of universal deceit, telling the truth becomes a revolutionary act." - George Orwell "When injustice becomes law, resistance becomes duty" - Thomas Jefferson No more pain. 03.12.60 -- 12.28.10 http://www.youtube.com/Eightbanger

12-04-2012, 12:13 AM	#181
Camper Special 396 Registered User Join Date: Nov 2012 Location: East Greenville PA Posts: 28	Re: 72 Cheyenne for parts Tom, Thanks for the pics and measurements on the spring hangers. I am learning a lot about them (learning the hard and expensive way). Most are year specific. It looks like these are the same as 70 and 71. I need 68 or 69. On the 68 and 69 they locate the springs closer to the frame. I have a 68 and a 69 truck and the springs are less than 2 inches from the frame, while on the 70, 71, & 72 they are about 3 inches from the frame. The 68 is also a cast iron part while the 69 is stamped steel. I just ordered a set of 69's from Krazy Ray. Sorry I could not make these work

12-31-2012, 07:34 PM	#182
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: 72 Cheyenne for parts Tom, I can't tell if the BB Shroud is still available? It looks good in pics...If still available I'm interested pending your description. Hope you are well...Happy New Year! Thanks, Alan

12-31-2012, 07:47 PM	#183
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: 72 Cheyenne for parts Dis-regard on Fan Shrould...I found one a bit closer. Thanks...Alan

01-06-2013, 08:20 PM	#184
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: 72 Cheyenne for parts Is the driver's side fender still available, and if so what can you let it go for locally? Thanks ~ Tony

01-06-2013, 11:38 PM	#185
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 72 Cheyenne for parts tdkostka driver fender went to Oregon last month, I have some others, not quite as nice or a new NOS GM one in the box for $500. BB fan shroud was sold a while back. Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

01-07-2013, 12:50 AM	#186
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: 72 Cheyenne for parts I'll have to drop by some Saturday to see if you have anything better than what I have in there now but I am not in a hurry, thanks.

01-12-2013, 07:11 PM	#187
jhiggy94 Registered User Join Date: Jun 2012 Location: Birnamwood, Wisconsin Posts: 178	Re: 72 Cheyenne for parts I need the rear frame mounted shock supports. I have a 3/4 ton four wheel drive and im not sure if they would be the same as the two wheel drive. If they are I would take them __________________ My K20 build http://67-72chevytrucks.com/vboard/s...d.php?t=538539

01-12-2013, 07:15 PM	#188
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 72 Cheyenne for parts Jhiggy94, what year do you have? these are not the same, but I may have them. __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

01-13-2013, 11:10 AM	#189
jhiggy94 Registered User Join Date: Jun 2012 Location: Birnamwood, Wisconsin Posts: 178	Re: 72 Cheyenne for parts It is a 72 __________________ My K20 build http://67-72chevytrucks.com/vboard/s...d.php?t=538539

01-13-2013, 06:28 PM	#190
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,190	Re: 72 Cheyenne for parts J Higgy I have a pair of them $48 shipped they are 4x4 specific & in good shape Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!



Register or Log In To remove these advertisements.

01-14-2013, 11:14 AM	#191
jhiggy94 Registered User Join Date: Jun 2012 Location: Birnamwood, Wisconsin Posts: 178	Re: 72 Cheyenne for parts Ill take them, pm me your payment info and ill pay you through paypal __________________ My K20 build http://67-72chevytrucks.com/vboard/s...d.php?t=538539

Register or Log In To remove these advertisements.