|
05-04-2019, 03:42 PM
|
#1 |
|
Registered User
Join Date: Jan 2010
Location: Here
Posts: 5,420
|
Ramhorns on my 327
I have. Oth the 2.5" and 2" manifolds here beside my engine. Engines is a rebuilt 327. Builder says should be at 350hp and 375 pounds torque at the flywheel aprox . Has a roller cam in it. If I use the 2" (with 2 1/4 pipes) instead of the 2.5" am I really going to be leaving a lot of power the table that I will regret it? It's an automatic so it's never going to be over 5000 rpm. Anyone with experience on these. And I will not do headers.
|
|
|
|
05-04-2019, 03:43 PM
|
#2 |
|
Registered User
Join Date: Jan 2010
Location: Here
Posts: 5,420
|
Re: Ramhorns on my 327
Can someone move this to the proper area. Didn't realise I was in projects area. Oops.
|
|
|
|
|
05-04-2019, 05:51 PM
|
#3 |
|
Registered User
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,285
|
Re: Ramhorns on my 327
There is a similar thread in the engine/drivetrain area. Member was having perfromance issues with, I believe a 350, thought the ram horn manfolds were choking it....they were NOT...
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
