|
10-29-2007, 03:03 PM
|
#1 |
|
Registered User
Join Date: May 2006
Location: Stockport, Ohio
Posts: 157
|
67 for me too
I always wanted a 67 - 72 chevy short bed, 1/2 ton, V8. So I went out and bought a GMC 3/4 ton, long bed, 6 cyl.
 I know some wont like it but I just love the 67 - 68 chevy grill and since my GMC was not in very good condition I found a 67 chevy grill. I bought a chevy van to get the 350 and 700r transmission. I'm still not sure about the 1/2 ton short bed yet, but the 3/4 ton long bed is growing on me so I bought some wheels and tires for it and will run that way for a while. If I find a good frame and running gears for a short bed 1/2 ton I may still go that way at a later date. Just swap motor and body. Either find a good bed or shorten mine. Right now all I need to be on the road is exhaust built. The body is pretty good, all I replaced so far is the rockers and sanded and spray bombed the roof because it had a lot of surface rust. The cup on the right fender under the battery is gone and will need to patch or replace the whole fender. Future plans call for new paint but let the funds build up a little to keep the wife happy for now. I know you all like picswhen I bought it  some now  notice chevy grill and GMC tailgate  wheels  engine bay 
__________________
The start of a new toy 1967 GMC 3/4 ton |
|
|
|
10-29-2007, 10:47 PM
|
#2 | |
|
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: 67 for me too
Quote:
As far as the long bed goes... it's still a '67. These were one year only trucks as far as the small rear window and sans side marker lights. It will be cool no matter what. Good luck on your build. Don
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo Last edited by Richard8971; 10-29-2007 at 10:54 PM. |
|
|
|
|
|
10-31-2007, 12:13 AM
|
#3 |
|
Luv the Crewcabs
Join Date: Aug 2006
Location: Andrews, In. 46702
Posts: 4,097
|
Re: 67 for me too
Truck Look's Good as Is, I think you will be Happy to Just Drive it as is For Awhile. Sometimes that is Best to Figure out What Direction you Want to Go..........
Any How Welcome to The 67 Club, Rick
__________________
55 Nomad 52 Willys Truck 67 Stepper 67 Fleet 68 Wrecker 68 Suburban 76 Crewcab 79 Gmc Dumptruck 84 Blazer 86 Crewcab Stepside 87 Iroc 89 GMC Plow Truck 91 Camaro Vert 96 Z71 Stepsde |
|
|
|
|
10-31-2007, 12:33 AM
|
#4 | |
|
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: 67 for me too
Quote:
TEAR THAT SUCKER DOWN!!! Phew, sorry... at least make sure it's sound, but the sooner you tear into it, the sooner you will be done. Any amount of time or money invested in your truck will not be wasted. Build it the way you want it... but at least DO SOMETHING WITH IT! Don't just leave it alone. Make it yours. Good luck! Don
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
|
|
|
|
|
10-31-2007, 01:03 AM
|
#5 |
|
KEEP ON TRUCKIN'
 
Join Date: Jun 2005
Location: Sterling, Va.
Posts: 5,731
|
Re: 67 for me too
Looks real nice. Like they said, it's your ride so do it your way.
__________________
JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10  Father/Son Projecthttp://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER" 
|
|
|
|
|
10-31-2007, 02:34 PM
|
#6 |
|
Registered User
Join Date: May 2006
Location: Stockport, Ohio
Posts: 157
|
Re: 67 for me too
Well I've done away with some of the PO's customizing, he had some kind of stainless wire mesh over tail lights, back window, and grill. That left me with a bunch of holes to file around the back window on the inside. The 2-speed power glide was one of the first things that had to go, wouldn't shift till 50 mph. I converted the newer 350 fuel injected motor to carberated and HIE distributer to replace the 250. The paint looks better in the pictures than it really is. Its soon to be a driver when the exhaust gets installed.
__________________
The start of a new toy 1967 GMC 3/4 ton |
|
|
|
|
11-15-2008, 07:25 PM
|
#7 |
|
Registered User
Join Date: May 2006
Location: Stockport, Ohio
Posts: 157
|
Re: 67 for me too
A little update on the truck. I changed the paint a little and will be putting on the molding as soon as I find some. Been looking for used but may bite the bullet and order new. I painted myself and is not show ready but will look ok going down the road. I'm ready to do some wet sanding and buffing, then put everything back together. Dark, rainy day so pics aren't very good.
__________________
The start of a new toy 1967 GMC 3/4 ton |
|
|
|
|
11-15-2008, 07:33 PM
|
#8 |
|
Registered User
Join Date: Sep 2008
Location: CASA GRANDE AZ
Posts: 4,276
|
Re: 67 for me too
100 x better its gonna look great with the trim
|
|
|
|
|
11-15-2008, 09:59 PM
|
#9 |
|
Resident of Here
Join Date: May 2008
Location: Wesley Chapel, FL, USA
Posts: 7,716
|
Re: 67 for me too
Looks great!
__________________
~Bradley~ 2004 Black GTO LS2/T56 too much to list  Miss having a truck 
|
|
|
|
|
11-16-2008, 09:24 AM
|
#10 |
|
State of Confusion!
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,672
|
Re: 67 for me too
Truck is looking really good!
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
