1958 Apache 38 Dually Dump Project - Page 27 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lower50's · 05-29-2015, 11:25 PM

Nice Nice build. Your craftsmanship is amazing. This is going to be one wicked truck. What year CJ5 is that and what motor do you have in it? Thanks

RockTonka · 05-29-2015, 11:53 PM

Thanks lower50's, we appreciate that!

The jeep is a 73 that we've been working on for over 20 some years...the current drivetrain is a fairly modified Ramjet 502/Turbo400/203-205 set-up. We don't make the time to take it out much anymore...kind of a shame. We've been thinking about selling/trading it off, but it's hard when you've had something that long.

RockTonka · 05-30-2015, 12:01 AM

Had a rear driveshaft made this week...kinda long at about 70". We went with a 4" shaft to provide a greater rpm rating for that length.

Kim57 · 05-30-2015, 09:57 AM

Nice.
kim

RockTonka · 06-17-2015, 03:49 AM

Thanks Kim!

Not much to add, been busy with life I guess. The boy and I spent some time on the pass door, new bushings/pins and got it fairly close to where we want it...gonna need a bit of perimeter trimming though. We've also been playing around with a visor...not too sure about it, but it's growing on us.

**Dieselwrencher** · 06-17-2015, 03:43 PM

I think the visor will look more in place with a windshield in there. I like the look. When is the cab and front clip scheduled to get shot?

lower50's · 06-17-2015, 05:54 PM

Quote:

Originally Posted by RockTonka

Thanks lower50's, we appreciate that!

The jeep is a 73 that we've been working on for over 20 some years...the current drivetrain is a fairly modified Ramjet 502/Turbo400/203-205 set-up. We don't make the time to take it out much anymore...kind of a shame. We've been thinking about selling/trading it off, but it's hard when you've had something that long.

I hear you!! I've had my 67 CJ5 for 21 years nothing stock with a 4.3L.
Keep up the good work.

RockTonka · 06-17-2015, 10:14 PM

Quote:

Originally Posted by Dieselwrencher

I think the visor will look more in place with a windshield in there. I like the look. When is the cab and front clip scheduled to get shot?

Yea, it'll come together...I've looked at them enough to know we'll like it. It needs some dimples of course...I've got some 2 1/2" and 3" dimple dies on order for it.

No real schedule for paint...still have more metal work, but we're anxious.

Quote:

Originally Posted by lower50's

I hear you!! I've had my 67 CJ5 for 21 years nothing stock with a 4.3L.
Keep up the good work.

Cool! The first vehicle my parents bought new together was a 67 CJ5...they still have it. We grew up exploring the desert along the Colorado in SoCal and into Mexico as kids in the back seat of that jeep. I rebuilt it for them a few years ago, kinda a somewhat street legal crawler of sorts...CRD60s, SM420, Atlas, F.I. 231 V6...removeable rear fenders have kept the popo at bay so far around town.

Pics of their jeep...

**Dieselwrencher** · 06-18-2015, 04:07 PM

That's a sweet jeep with some nice history to it! Nice work on it too!

RockTonka · 06-21-2015, 08:59 PM

Thanks DW!

The 2 1/2" and 3" dimple dies came in on Saturday, can't say enough good things about Barbed Wire Off Road http://www.shop.barbedwireoffroad.com/

...they made the 3" die the same day I called and had them on my doorstep 2 days later.

We had to work around a center brace on the visor...drilling out the spot welds and pulling the brace to dimple the middle. Popped a center hole and a few more spot weld holes in the brace and welded/smoothed it back in.

RockTonka · 06-21-2015, 09:22 PM

Looks better...

apache200 · 06-21-2015, 09:41 PM

That looks killer! Really fits your build

**Advanced Design** · 06-21-2015, 10:40 PM

Quote:

Originally Posted by apache200

That looks killer! Really fits your build

I agree, nice work!

stersam · 06-22-2015, 01:34 AM

Totally saw that coming

lower50's · 06-22-2015, 08:24 AM

Ya man!

RANDY COX · 06-22-2015, 08:46 AM

I like the Visor and the truck is gonna be killer....

Kim57 · 06-22-2015, 09:56 AM

You guys are doing some great work.
Kim

RockTonka · 06-22-2015, 11:58 PM

Quote:

Originally Posted by apache200

That looks killer! Really fits your build

Quote:

Originally Posted by Advanced Design

I agree, nice work!

Quote:

Originally Posted by stersam

Totally saw that coming

Quote:

Originally Posted by lower50's

Ya man!

Quote:

Originally Posted by RANDY COX

I like the Visor and the truck is gonna be killer....

Quote:

Originally Posted by Kim57

You guys are doing some great work.
Kim

Thanks y'all!!

RockTonka · 07-02-2015, 05:28 AM

We picked up a new pump/valve assembly (10 gpm) that should raise the bed in about 15-20 secs...made a simple mount to bolt it to the inside of the frame. Clamped it about where it's going to sit...gonna try and get a PTO to pump driveshaft made tomorrow before everybody closes down for the 4th.

**Advanced Design** · 07-02-2015, 01:36 PM

Nice work on the mount. The large hole looks to be a slip fit over the flange on the pump. Did you machine the hole? Looks too precise for a hole saw. And as I mentioned before, great welds! Could look at them for minutes at a time.

Kim57 · 07-03-2015, 10:28 AM

Amazing how much cool stuff is in this build.
Kim

RockTonka · 07-03-2015, 04:00 PM

Quote:

Originally Posted by Advanced Design

Nice work on the mount. The large hole looks to be a slip fit over the flange on the pump. Did you machine the hole? Looks too precise for a hole saw. And as I mentioned before, great welds! Could look at them for minutes at a time.

Thanks AD!! I wish we had lathe/mill capabilities, but alas, just grinders, torch, welder, and holesaws...just took my time with it.

Quote:

Originally Posted by Kim57

Amazing how much cool stuff is in this build.
Kim

Thank you Kim, that means a lot to us!

Additionally, since I don't have any other place to really post this kind of stuff up at...my boy was able to sell the Roadrunner last week for about twice what this new project cost...

We're thinking this is a keeper!!

**Advanced Design** · 07-03-2015, 04:16 PM

Nice 57! A keeper for sure.

_Ogre · 07-04-2015, 12:35 PM

Quote:

kinda long at about 70"

holy smoly! that's a lot of drive shaft

RockTonka · 07-13-2015, 09:08 PM

Quote:

Originally Posted by Advanced Design

Nice 57! A keeper for sure.

Yea, the shop is much happier with the 57 in it!

05-29-2015, 11:25 PM	#651
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: 1958 Apache 38 Dually Dump Project Nice Nice build. Your craftsmanship is amazing. This is going to be one wicked truck. What year CJ5 is that and what motor do you have in it? Thanks __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

05-29-2015, 11:53 PM	#652
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 1958 Apache 38 Dually Dump Project Thanks lower50's, we appreciate that! The jeep is a 73 that we've been working on for over 20 some years...the current drivetrain is a fairly modified Ramjet 502/Turbo400/203-205 set-up. We don't make the time to take it out much anymore...kind of a shame. We've been thinking about selling/trading it off, but it's hard when you've had something that long. __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

05-30-2015, 12:01 AM	#653
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 1958 Apache 38 Dually Dump Project Had a rear driveshaft made this week...kinda long at about 70". We went with a 4" shaft to provide a greater rpm rating for that length. Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

05-30-2015, 09:57 AM	#654
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: 1958 Apache 38 Dually Dump Project Nice. kim __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=283107

06-17-2015, 03:49 AM	#655
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 1958 Apache 38 Dually Dump Project Thanks Kim! Not much to add, been busy with life I guess. The boy and I spent some time on the pass door, new bushings/pins and got it fairly close to where we want it...gonna need a bit of perimeter trimming though. We've also been playing around with a visor...not too sure about it, but it's growing on us. Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

06-17-2015, 03:43 PM	#656
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: 1958 Apache 38 Dually Dump Project I think the visor will look more in place with a windshield in there. I like the look. When is the cab and front clip scheduled to get shot? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

06-18-2015, 04:07 PM	#659
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,141	Re: 1958 Apache 38 Dually Dump Project That's a sweet jeep with some nice history to it! Nice work on it too! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

06-21-2015, 08:59 PM	#660
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 1958 Apache 38 Dually Dump Project Thanks DW! The 2 1/2" and 3" dimple dies came in on Saturday, can't say enough good things about Barbed Wire Off Road http://www.shop.barbedwireoffroad.com/ ...they made the 3" die the same day I called and had them on my doorstep 2 days later. We had to work around a center brace on the visor...drilling out the spot welds and pulling the brace to dimple the middle. Popped a center hole and a few more spot weld holes in the brace and welded/smoothed it back in. Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

06-21-2015, 09:22 PM	#661
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 1958 Apache 38 Dually Dump Project Looks better... Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

06-21-2015, 09:41 PM	#662
apache200 Registered User Join Date: Aug 2011 Location: North Carolina Posts: 275	Re: 1958 Apache 38 Dually Dump Project That looks killer! Really fits your build __________________ 1958 Chevy Apache Stepside 1955 BBW Fleetside

06-22-2015, 01:34 AM	#664
stersam Registered User Join Date: Aug 2013 Location: aloha Posts: 44	Re: 1958 Apache 38 Dually Dump Project Totally saw that coming

06-22-2015, 08:24 AM	#665
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: 1958 Apache 38 Dually Dump Project Ya man! __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

06-22-2015, 08:46 AM	#666
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: 1958 Apache 38 Dually Dump Project I like the Visor and the truck is gonna be killer.... __________________ 1964 BBC 402 4x4

06-22-2015, 09:56 AM	#667
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: 1958 Apache 38 Dually Dump Project You guys are doing some great work. Kim __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=283107

07-02-2015, 05:28 AM	#669
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: 1958 Apache 38 Dually Dump Project We picked up a new pump/valve assembly (10 gpm) that should raise the bed in about 15-20 secs...made a simple mount to bolt it to the inside of the frame. Clamped it about where it's going to sit...gonna try and get a PTO to pump driveshaft made tomorrow before everybody closes down for the 4th. Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread



Register or Log In To remove these advertisements.

07-02-2015, 01:36 PM	#670
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: 1958 Apache 38 Dually Dump Project Nice work on the mount. The large hole looks to be a slip fit over the flange on the pump. Did you machine the hole? Looks too precise for a hole saw. And as I mentioned before, great welds! Could look at them for minutes at a time. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

07-03-2015, 10:28 AM	#671
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: 1958 Apache 38 Dually Dump Project Amazing how much cool stuff is in this build. Kim __________________ My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=283107

07-03-2015, 04:16 PM	#673
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: 1958 Apache 38 Dually Dump Project Nice 57! A keeper for sure. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

Register or Log In To remove these advertisements.