The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-08-2009, 07:33 PM   #1
rxm6
Registered User
 
Join Date: Jul 2009
Location: San Jose, CA
Posts: 2
new member w/ quick question

Hey everybody,

I have a 75 k5 and a quick question.

Just curious if I can put on 33x13.50 with stock suspension setup without rubbing or without trimming the fenders.

I've definitely found pictures of k5's with 33's on them, but they are raised a few inches. I did find an image of a 76 with stock suspension with 33's on them, but I can't tell if the fenders have been trimmed or not. That was Tink's truck on this website. I also found useRc10's truck with 33's, but I don't know if the 85 fender openings were different or if the tires on his truck are as wide (if that even makes a difference) His truck is also raised 2''

so any help is appreciated, thanks.
rxm6 is offline   Reply With Quote
Old 07-09-2009, 08:31 AM   #2
tvblazer78
Low & Fast!
 
tvblazer78's Avatar
 
Join Date: Jan 2007
Location: Knoxville, TN
Posts: 3,110
Re: new member w/ quick question

Quote:
Originally Posted by rxm6 View Post
Hey everybody,

I have a 75 k5 and a quick question.

Just curious if I can put on 33x13.50 with stock suspension setup without rubbing or without trimming the fenders.

I've definitely found pictures of k5's with 33's on them, but they are raised a few inches. I did find an image of a 76 with stock suspension with 33's on them, but I can't tell if the fenders have been trimmed or not. That was Tink's truck on this website. I also found useRc10's truck with 33's, but I don't know if the 85 fender openings were different or if the tires on his truck are as wide (if that even makes a difference) His truck is also raised 2''

so any help is appreciated, thanks.
First thing welcome!

I am not a 4x4 guy, but I would say you need about 2"-3" to get them to work.

Am I right?
tvblazer78 is offline   Reply With Quote
Old 07-09-2009, 10:48 AM   #3
tobiahr
Registered User
 
tobiahr's Avatar
 
Join Date: Nov 2007
Location: Lincoln NE
Posts: 513
Re: new member w/ quick question

the largest i could ever fit with stock suspension was 32 inch and even then i would rub on the front fenders on full flex

Last edited by tobiahr; 07-09-2009 at 10:49 AM.
tobiahr is offline   Reply With Quote
Old 07-09-2009, 11:55 AM   #4
husker33
Registered User
 
Join Date: Jul 2008
Location: chicago area
Posts: 25
Re: new member w/ quick question

My 84 4x4 has no issues with 33s. Is suspension different from 75-84?
__________________
2008 Chrysler 300C
1984 Chevy K5 Blazer
husker33 is offline   Reply With Quote
Old 07-09-2009, 01:30 PM   #5
rxm6
Registered User
 
Join Date: Jul 2009
Location: San Jose, CA
Posts: 2
Re: new member w/ quick question

well, i do know that late 70's blazers and up are about 2.5-3 inches taller than the early blazers, however, i don't know if that is a body or suspension lift (not that it matters).

I'm not adverse to raising the suspension, but if i can fit the bigger tires without the suspension lift, than i would rather do that.

btw, this truck's offroading use i would categorize as light. The most offroading it will do is a ranch and a few rough mountain roads. nothing serious imo.

Last edited by rxm6; 07-09-2009 at 01:30 PM. Reason: spelling fail
rxm6 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:07 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com