MD the panelburb getting cut up - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 06-03-2019, 05:56 PM

I will be cutting this one up pretty soon. I suspect there is a lot of bondo bc there is a lot of rust in this thing so I will have to check it out as we go. Cuts will start at $25 plus shipping and go from there. I have already gutted most of this but let me know what else you might need and I will see if I can help out. The front 3 doors have some rust in them but does not appear to be too terrible. The barn doors are shot and the lock pawl is already gone. I believe the front doors are 67 model (at least the wing windows)

Would like to keep the hinges with the 3rd door for now.

All of the glass was custom tinted (inside the glass) it is not removable but several of them are broken.

Would like to sell the frame as one if possible. It has 6 lug front disc brake conversion, set up for automatic & BB and I "think" it has a posi 6 lug rear. Still need to pull cover on that to verify. No title or vin available for the frame.

B pillar is SOLD
.

**richard2717** · 06-03-2019, 08:03 PM

More general pics

.

**richard2717** · 06-03-2019, 08:04 PM

6-10

.

**richard2717** · 06-03-2019, 08:06 PM

11-15

.

**richard2717** · 06-03-2019, 08:07 PM

16-20

.

**richard2717** · 06-03-2019, 08:08 PM

21-25

.

**richard2717** · 06-03-2019, 08:09 PM

26-30

.

**richard2717** · 06-03-2019, 08:11 PM

A lot of the stuff I have already pulled from this is already listed in this thread

https://67-72chevytrucks.com/vboard/...d.php?t=786921

.

**richard2717** · 06-03-2019, 08:15 PM

I have not pulled the headliner or bows yet so will wait to list them until I can determine condition of them. It looks like original headliner panels that have been covered over with fabric

Heliarcn · 06-11-2019, 09:57 AM

Quote:

Originally Posted by richard2717

I have not pulled the headliner or bows yet so will wait to list them until I can determine condition of them. It looks like original headliner panels that have been covered over with fabric

Interested pending condition, looking for some really nice ones. Hopefully these were covered up and still in good shape. No rush on my end.

**richard2717** · 06-11-2019, 03:27 PM

Quote:

Originally Posted by Heliarcn

Interested pending condition, looking for some really nice ones. Hopefully these were covered up and still in good shape. No rush on my end.

Bret
I will try later today to get them out and will post back

**richard2717** · 06-11-2019, 05:10 PM

Quote:

Originally Posted by richard2717

Bret
I will try later today to get them out and will post back

Bret
One of them has a couple cracks in the clear part of the plastic but the other two look pretty nice. I will try to get them out tomorrow for a close inspection of them.

.

Heliarcn · 06-12-2019, 09:51 AM

Quote:

Originally Posted by richard2717

Bret
One of them has a couple cracks in the clear part of the plastic but the other two look pretty nice. I will try to get them out tomorrow for a close inspection of them.

.

Let me know how much you want for the 2 good ones. I need the little chrome clips on the ends to. Shipping to 89149.

**richard2717** · 06-03-2019, 08:17 PM

Few more pics

.

**ShortbedClayton** · 06-03-2019, 09:43 PM

If you cut the pass. Side B piller out? How much for that? How much for third door complete with hinges?
Posted via Mobile Device

**Madkidd007** · 06-04-2019, 04:42 AM

Quote:

Originally Posted by ShortbedClayton

If you cut the pass. Side B piller out? How much for that? How much for third door complete with hinges?
Posted via Mobile Device

If for some reason Clayton passes on this, I’d be interested next. Well just the b-pillar

**richard2717** · 06-04-2019, 06:35 AM

Quote:

Originally Posted by ShortbedClayton

If you cut the pass. Side B piller out? How much for that? How much for third door complete with hinges?
Posted via Mobile Device

Quote:

Originally Posted by Madkidd007

If for some reason Clayton passes on this, I’d be interested next. Well just the b-pillar

I gotta leave early to head out on the road but will get it all figured up when I get back this afternoon

**ShortbedClayton** · 06-04-2019, 06:57 AM

Quote:

Originally Posted by richard2717

I gotta leave early to head out on the road but will get it all figured up when I get back this afternoon

Thanks Richard
Posted via Mobile Device

**richard2717** · 06-04-2019, 07:39 PM

Clayton

B pillar is $150 plus shipping I can cut where ever you need

3rd door minus door panel but including hinges $160 plus shipping

Probably cost more to ship on this than what it would cost you to make a trip down

I could leave the door attached to the B pillar so your gaps are already set

**ShortbedClayton** · 06-04-2019, 07:49 PM

Quote:

Originally Posted by richard2717

Clayton

B pillar is $150 plus shipping I can cut where ever you need

3rd door minus door panel but including hinges $160 plus shipping

Probably cost more to ship on this than what it would cost you to make a trip down

I could leave the door attached to the B pillar so your gaps are already set

Can you email me pics of the door and rust and of the b piller? No shipping I’ll make the drive down and visit with ya. Thanks old friend

Clayton
Posted via Mobile Device

**richard2717** · 06-04-2019, 07:57 PM

Quote:

Originally Posted by ShortbedClayton

Can you email me pics of the door and rust and of the b piller? No shipping I’ll make the drive down and visit with ya. Thanks old friend

Clayton
Posted via Mobile Device

Give me a lil bit to get it off and check it real good. Been crazy here at work last couple days

**ShortbedClayton** · 06-04-2019, 08:00 PM

Quote:

Originally Posted by richard2717

Give me a lil bit to get it off and check it real good. Been crazy here at work last couple days

I’m in no rush at all.. just figured a spare set up wouldn’t hurt to have around.. take your time
Posted via Mobile Device

**ShortbedClayton** · 06-04-2019, 08:06 PM

Quote:

Originally Posted by richard2717

Give me a lil bit to get it off and check it real good. Been crazy here at work last couple days

I’m in no rush at all.. just figured a spare set up wouldn’t hurt to have around.. take your time
Posted via Mobile Device

**richard2717** · 06-07-2019, 03:21 PM

Quote:

Originally Posted by ShortbedClayton

I’m in no rush at all.. just figured a spare set up wouldn’t hurt to have around.. take your time
Posted via Mobile Device

Clayton
Got a chance to look closer today. The B pillar looks to be in great shape. The only spot I have not checked yet is underneath. Will try to get something out there in the morning to lay on, had a lot of rain.

.

**Madkidd007** · 06-11-2019, 08:40 AM

Quote:

Originally Posted by richard2717

Clayton

B pillar is $150 plus shipping I can cut where ever you need

3rd door minus door panel but including hinges $160 plus shipping

Probably cost more to ship on this than what it would cost you to make a trip down

I could leave the door attached to the B pillar so your gaps are already set

Since Clayton is passing, have you had an opportunity to get underneath it yet? Rain has been crazy here also, I’d like to see the underside where it bolts to the floor support since I see rust lines on the exterior paint down low. Thank you.

06-03-2019, 05:56 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,884	the panelburb getting cut up I will be cutting this one up pretty soon. I suspect there is a lot of bondo bc there is a lot of rust in this thing so I will have to check it out as we go. Cuts will start at $25 plus shipping and go from there. I have already gutted most of this but let me know what else you might need and I will see if I can help out. The front 3 doors have some rust in them but does not appear to be too terrible. The barn doors are shot and the lock pawl is already gone. I believe the front doors are 67 model (at least the wing windows) Would like to keep the hinges with the 3rd door for now. All of the glass was custom tinted (inside the glass) it is not removable but several of them are broken. Would like to sell the frame as one if possible. It has 6 lug front disc brake conversion, set up for automatic & BB and I "think" it has a posi 6 lug rear. Still need to pull cover on that to verify. No title or vin available for the frame. B pillar is SOLD . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by richard2717; 06-16-2019 at 07:20 AM.

06-03-2019, 08:03 PM	#2
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,884	Re: the panelburb getting cut up More general pics . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-03-2019, 08:04 PM	#3
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,884	Re: the panelburb getting cut up 6-10 . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-03-2019, 08:06 PM	#4
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,884	Re: the panelburb getting cut up 11-15 . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-03-2019, 08:07 PM	#5
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,884	Re: the panelburb getting cut up 16-20 . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-03-2019, 08:08 PM	#6
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,884	Re: the panelburb getting cut up 21-25 . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-03-2019, 08:09 PM	#7
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,884	Re: the panelburb getting cut up 26-30 . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-03-2019, 08:11 PM	#8
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,884	Re: the panelburb getting cut up A lot of the stuff I have already pulled from this is already listed in this thread https://67-72chevytrucks.com/vboard/...d.php?t=786921 . __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-03-2019, 08:15 PM	#9
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,884	Re: the panelburb getting cut up I have not pulled the headliner or bows yet so will wait to list them until I can determine condition of them. It looks like original headliner panels that have been covered over with fabric __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-03-2019, 08:17 PM	#14
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,884	Re: the panelburb getting cut up Few more pics . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

06-03-2019, 09:43 PM	#15
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 678	Re: the panelburb getting cut up If you cut the pass. Side B piller out? How much for that? How much for third door complete with hinges? Posted via Mobile Device

06-04-2019, 07:39 PM	#19
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,884	Re: the panelburb getting cut up Clayton B pillar is $150 plus shipping I can cut where ever you need 3rd door minus door panel but including hinges $160 plus shipping Probably cost more to ship on this than what it would cost you to make a trip down I could leave the door attached to the B pillar so your gaps are already set __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.