40/60 Bench seat what year/ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72MARIO · 04-21-2002, 01:17 PM

Hey i went down to the wreckers and asked him to keep a eye open for a benck seat from a 88-2001 bench will they all fit ? I Know that I will have to make new brackets to mount the seat but will they all fit ? what about seat belts what should I do ? thanks for the help. he said he would want 350-450 or so thats in Canada

------------------
72 Chevy 350 1\2 leaf springs soon to have ps, pb, 700R 2/4 drop , 88-94 bench ,67 front clip ,Blazer tank flip down tail light gas filler
Filled stake pockets minor smoothing to fire wall and Frame shortened.posible idea of ash tray into cup holder?

NSANE68!!! · 04-21-2002, 01:37 PM

I have the 60/40 out of a 91. Just need a small spacer under passenger and a 1" piece under the middle support. You will understand when you get it. I love this seat it is so comfortable. Seatbelts, WHO NEEDS STINKING SEATBELTS. Just kidding I haven't tackeled that yet. You should be able to use the stock ones.

------------------
68chevy, 95step bed, euro taillights, fastbags, fully shaved, phantom grill, 350 with a small huffer, TH350, 12bolt Auburn posi 4:11's......... 95 Chevy Tahoe (PHATHOE) all mouldings and emblems stripped, 4/4 drop, Niche Bellas 18's, billet grill, Euro taillights, clear corners, billet antena & wiper covers, leather interior, Pioneer cd, alpine amp, Rockford 15's.......... 97 CBR 900 RR, everything that is aluminum was polished or powdercoated candy purple, 6 color change Chameleon paint at $300 a pint(ouch), custom one of a kind under seat exaust, hand cut decals, runs 11 flat at 126mph FUUUUUUUUUUUUUUN!!!!!!!! ............ my toys at http://communities.msn.com/NSANE68Tr...s/shoebox.msnw

Longhorn Man · 04-21-2002, 02:57 PM

Yes, you can use the stock ones. This seat will be just a little high. You'll need either a tilt wheel, or a smaller than stock wheel. Thin thighs help alot too.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

04-21-2002, 01:17 PM	#1
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	40/60 Bench seat what year/ Hey i went down to the wreckers and asked him to keep a eye open for a benck seat from a 88-2001 bench will they all fit ? I Know that I will have to make new brackets to mount the seat but will they all fit ? what about seat belts what should I do ? thanks for the help. he said he would want 350-450 or so thats in Canada ------------------ 72 Chevy 350 1\2 leaf springs soon to have ps, pb, 700R 2/4 drop , 88-94 bench ,67 front clip ,Blazer tank flip down tail light gas filler Filled stake pockets minor smoothing to fire wall and Frame shortened.posible idea of ash tray into cup holder? __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

04-21-2002, 01:37 PM	#2
NSANE68!!! SLICER AND DICIER Join Date: May 2001 Location: Quuen Creek Posts: 1,383	I have the 60/40 out of a 91. Just need a small spacer under passenger and a 1" piece under the middle support. You will understand when you get it. I love this seat it is so comfortable. Seatbelts, WHO NEEDS STINKING SEATBELTS. Just kidding I haven't tackeled that yet. You should be able to use the stock ones. ------------------ 68chevy, 95step bed, euro taillights, fastbags, fully shaved, phantom grill, 350 with a small huffer, TH350, 12bolt Auburn posi 4:11's......... 95 Chevy Tahoe (PHATHOE) all mouldings and emblems stripped, 4/4 drop, Niche Bellas 18's, billet grill, Euro taillights, clear corners, billet antena & wiper covers, leather interior, Pioneer cd, alpine amp, Rockford 15's.......... 97 CBR 900 RR, everything that is aluminum was polished or powdercoated candy purple, 6 color change Chameleon paint at $300 a pint(ouch), custom one of a kind under seat exaust, hand cut decals, runs 11 flat at 126mph FUUUUUUUUUUUUUUN!!!!!!!! ............ my toys at http://communities.msn.com/NSANE68Tr...s/shoebox.msnw __________________ 01 Tahoe 22's 2/4 drop and tv's 68 chevy money pit 51 chevy belair 95 Honda 900RR 05 GMC Siearra (company truck)

04-21-2002, 02:57 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Yes, you can use the stock ones. This seat will be just a little high. You'll need either a tilt wheel, or a smaller than stock wheel. Thin thighs help alot too. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.