The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 07+ Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-04-2015, 08:30 AM   #26
truckdude239
Senior Member
 
truckdude239's Avatar
 
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,216
Re: 2011 Denali 6.2L No Oil Pressure

synthetic and K&N filters will not hurt the engine just make to doceument the oil changes, i'm an ase mechanic and i have several customers running full synthetic and they have over 200k on one he uses as a work truck with no major repairs
__________________
David fuller
Ase Certified Mechanic
Click here to help support our board!!


1971 Chevy c-10 under going a 4.8l LSx swap

Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305

2007 Honda Accord my daily 145kmiles
2002 Honda Accord 4 door With 330k(sisters car)
2005 toyota Avalon 228k( brothers car)
2002 Sububran 5.3 245k
2000 Tahoe 5.3l 378

General manager for Marco's Carwash & lube
truckdude239 is offline   Reply With Quote
Old 02-07-2017, 10:16 PM   #27
Steamman
Registered User
 
Join Date: Feb 2017
Location: Portsmouth
Posts: 1
Re: 2011 Denali 6.2L No Oil Pressure

I have just had my 2010 6.2 yukon worked on with 120k on the motor. Warning light came on and had it scanned, #4 cylinder came up no fire. Went through the obvious and still came up no fire on #4. Took it to a dealer in Cincinnati where we had bought it (2 1/2hrs from home) and had them check it out. It was under warranty so they went through it and determined that it had bad lifters and some kind of fuel relay problem that it would not go from 8cylinders to 4for fuel economy. So.... with a$2800 bill that the warranty took care of, we start our way back home with 2 1/2hr trip and make it all but 11 miles to the house and the oil pressure dropped to 0 and the warning to shut the engine off comes on. We have a rollback take our vehicle to our house and put a call into the dealer that made the repairs but they were now closed and a message left. This thread has a least given me some information to use when my call gets returned. I do have to say that when I did pull over and put it in neutral, I brought the vehicle to 3000rpms with no engine slapping and the oil pressure gage would raise just enough to get rid of the warning light but would drop as soon as I lowered the rpms.
Steamman is offline   Reply With Quote
Old 02-07-2017, 11:45 PM   #28
engineer_gregh
Registered User
 
engineer_gregh's Avatar
 
Join Date: Feb 2012
Location: Smyrna TN
Posts: 1,153
Re: 2011 Denali 6.2L No Oil Pressure

Steamman I wish you the best of luck. I've put 29K miles on mine since the new engine was installed, no problems thus far.
__________________
1971 Longbed BB Cheyenne Super
1972 Longbed SB Cheyenne Super
1972 Longbed Highlander Custom Deluxe
1975 K5 4x4 full convertible

Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=645165

Greg Smyrna TN
engineer_gregh is offline   Reply With Quote
Old 02-19-2017, 03:22 PM   #29
Noble3443
Registered User
 
Join Date: Feb 2017
Location: Des Moines
Posts: 1
Quote:
Originally Posted by engineer_gregh View Post
Steamman I wish you the best of luck. I've put 29K miles on mine since the new engine was installed, no problems thus far.
I bought a used 2010 Yukon Denali with 73k about 45 days ago, 8 hrs after delivery I had severe engine knock. Camshaft, lifters, rods all replaced for about $5k on selling dealer. Then 2 weeks later, one of the new lifters collapsed and was replaced under parts warranty. Now 2 weeks later my Yukon is presenting with the same issue again will be moving it to the dealership tomorrow or Tuesday. My guess is that this time it will get a new crated engine, crossing my fingers that I'm not covering any of this bill.
Posted via Mobile Device
Noble3443 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:26 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com