Hey guys I have a S10 question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bamm · 01-06-2008, 06:49 AM

I have a '95 S10 2.2 4cyl. w/ a 5 speed that decided it wanted to fly apart last week. I'm being told it is a 94-95 only transmission and I can't seem to find any around here (Virginia). Does anybody know if I can swap a '96 tranny in (I'm told the slave cylinder is different)? Anybody in the Va/NC area have a 94-5 tranny? Thanks, ....Jerry

cartman · 01-13-2008, 04:38 PM

I doubt it's only 2 year only tranny? any way if it has a separate bellhousing mabey you can swap yours over to it. if it is a one pice you could posibly go with a different slave cylinder to fit. S10 used the borg warner T5 for years ( not shure if that is what you got) any way it was the same tranny used in f bodys ( camaro/firebird) mustang had a version of it. and I think jeep used the tranny also. Find out exactally what model it is first. it may have been only used in the s10 for 2 years, but may have been used some where else ( another car/truck) for a longer run?

corn · 01-13-2008, 07:11 PM

Looks like 94-95 to me too.
Check here...

http://car-part.com/

This place has one for $200 & its @115 miles away.
http://www.chucksusedautoparts.com/
Heres $300 same distance
http://www.shenandoahautoparts.com/
$400 same distance pretty much
http://www.ingramautomall.com/

dls69cst · 01-14-2008, 02:56 AM

Some on Craigslist in Raleigh,NC.
Parting out trucks etc..

01-06-2008, 06:49 AM	#1
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Hey guys I have a S10 question. I have a '95 S10 2.2 4cyl. w/ a 5 speed that decided it wanted to fly apart last week. I'm being told it is a 94-95 only transmission and I can't seem to find any around here (Virginia). Does anybody know if I can swap a '96 tranny in (I'm told the slave cylinder is different)? Anybody in the Va/NC area have a 94-5 tranny? Thanks, ....Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS Last edited by Bamm; 01-06-2008 at 06:49 AM.

01-13-2008, 04:38 PM	#2
cartman Registered User Join Date: Dec 2007 Location: Gloucester, Massachusetts Posts: 49	Re: Hey guys I have a S10 question. I doubt it's only 2 year only tranny? any way if it has a separate bellhousing mabey you can swap yours over to it. if it is a one pice you could posibly go with a different slave cylinder to fit. S10 used the borg warner T5 for years ( not shure if that is what you got) any way it was the same tranny used in f bodys ( camaro/firebird) mustang had a version of it. and I think jeep used the tranny also. Find out exactally what model it is first. it may have been only used in the s10 for 2 years, but may have been used some where else ( another car/truck) for a longer run? Last edited by cartman; 01-13-2008 at 04:40 PM.

01-13-2008, 07:11 PM	#3
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Hey guys I have a S10 question. Looks like 94-95 to me too. Check here... http://car-part.com/ This place has one for $200 & its @115 miles away. http://www.chucksusedautoparts.com/ Heres $300 same distance http://www.shenandoahautoparts.com/ $400 same distance pretty much http://www.ingramautomall.com/ Last edited by corn; 01-13-2008 at 07:22 PM.

01-14-2008, 02:56 AM	#4
dls69cst Registered User Join Date: Jan 2008 Location: Apex,NC Posts: 30	Re: Hey guys I have a S10 question. Some on Craigslist in Raleigh,NC. Parting out trucks etc.. __________________ 1969 cst swb



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.