The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board > Squarebody Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-24-2011, 12:13 PM   #51
Conundrum
Registered User
 
Conundrum's Avatar
 
Join Date: Oct 2008
Location: Parsons, KS
Posts: 652
Re: "Sin-thia" My 74 GMC

I don't remember how much it was, I may have it wrote down somewhere, i'll try and look tonight.
All I have done since I posted the last pics has been getting my other 2 tires mountes and modified another center cap. Don't have any pics yet.
Posted via Mobile Device
__________________
74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r
http://67-72chevytrucks.com/vboard/s...d.php?t=460030


97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver
220,000 miles, all stock for now
Conundrum is offline   Reply With Quote
Old 10-24-2011, 04:53 PM   #52
jcspaek009
Registered User
 
jcspaek009's Avatar
 
Join Date: Oct 2011
Location: Calgary, Alberta
Posts: 26
Re: "Sin-thia" My 74 GMC

well its looking pretty epic so far man, you have put in alot of work in the truck from where it started from, but that is the name of the game right. i cant wait to cut the frame this week, how did the box holes line up after?
jcspaek009 is offline   Reply With Quote
Old 10-26-2011, 09:45 AM   #53
rs72z
Registered User
 
rs72z's Avatar
 
Join Date: Oct 2011
Location: Emory TX
Posts: 900
Re: "Sin-thia" My 74 GMC

I have seen in a few other articles on frame shortening that says you have to cut 6" off the rear of the frame also. Did you do this too?
I am picking up a 78 cc this weekend that i am going to shorten. Thanks ahead of time for the info.
rs72z is offline   Reply With Quote
Old 10-26-2011, 10:10 AM   #54
Conundrum
Registered User
 
Conundrum's Avatar
 
Join Date: Oct 2008
Location: Parsons, KS
Posts: 652
Re: "Sin-thia" My 74 GMC

Quote:
Originally Posted by rs72z View Post
I have seen in a few other articles on frame shortening that says you have to cut 6" off the rear of the frame also. Did you do this too?
I am picking up a 78 cc this weekend that i am going to shorten. Thanks ahead of time for the info.

I have read that as well, but my frame was already cut off at the rear due to the dump setup so i'll actually have to add a couple inches to mine.
Posted via Mobile Device
__________________
74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r
http://67-72chevytrucks.com/vboard/s...d.php?t=460030


97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver
220,000 miles, all stock for now
Conundrum is offline   Reply With Quote
Old 10-26-2011, 10:16 AM   #55
rs72z
Registered User
 
rs72z's Avatar
 
Join Date: Oct 2011
Location: Emory TX
Posts: 900
Re: "Sin-thia" My 74 GMC

Ok. thanks
rs72z is offline   Reply With Quote
Old 10-26-2011, 11:15 AM   #56
jcspaek009
Registered User
 
jcspaek009's Avatar
 
Join Date: Oct 2011
Location: Calgary, Alberta
Posts: 26
Re: "Sin-thia" My 74 GMC

so is it forsure that 6 inch's has to come off the rear? how many bolts hold on a short box to a frame, hey rs72z would you happen to have a link to the article for shorting frames
__________________
1950 Chevy 1/2 ton short box
1975 C10 project
2006 Nissan Titan
2007 Saturn Outlook
2008 Yz250f
jcspaek009 is offline   Reply With Quote
Old 10-26-2011, 11:19 AM   #57
rs72z
Registered User
 
rs72z's Avatar
 
Join Date: Oct 2011
Location: Emory TX
Posts: 900
Re: "Sin-thia" My 74 GMC

Quote:
Originally Posted by jcspaek009 View Post
so is it forsure that 6 inch's has to come off the rear? how many bolts hold on a short box to a frame, hey rs72z would you happen to have a link to the article for shorting frames
It's on my home computer. I will post a link tonight.
The way it's done in this post is the best way i think to do the front.

The other article says to remove the rear sill crossmember and cut 6" off and bolt the crossmember back in using factory holes.
rs72z is offline   Reply With Quote
Old 10-26-2011, 11:33 AM   #58
jcspaek009
Registered User
 
jcspaek009's Avatar
 
Join Date: Oct 2011
Location: Calgary, Alberta
Posts: 26
Re: "Sin-thia" My 74 GMC

ok sounds wicked, just a side note make sure when you cut the frame you wheel base is 117.5''(2985mm)
so i will wait to read your post before i start cut more on the frame
__________________
1950 Chevy 1/2 ton short box
1975 C10 project
2006 Nissan Titan
2007 Saturn Outlook
2008 Yz250f
jcspaek009 is offline   Reply With Quote
Old 10-26-2011, 12:09 PM   #59
rs72z
Registered User
 
rs72z's Avatar
 
Join Date: Oct 2011
Location: Emory TX
Posts: 900
Re: "Sin-thia" My 74 GMC

Quote:
Originally Posted by jcspaek009 View Post
ok sounds wicked, just a side note make sure when you cut the frame you wheel base is 117.5''(2985mm)
so i will wait to read your post before i start cut more on the frame
Found it, not near as good as this one though, except for the mention of the rear portion.
http://73-87.com/7387garage/chassis_...lwb_to_swb.htm
rs72z is offline   Reply With Quote
Old 10-26-2011, 12:37 PM   #60
Corts60
Just here to tinker
 
Corts60's Avatar
 
Join Date: Jun 2008
Location: Holland, MI
Posts: 3,672
Re: "Sin-thia" My 74 GMC

Great work man! I love the look of this truck.
Corts60 is offline   Reply With Quote
Old 10-26-2011, 07:52 PM   #61
Conundrum
Registered User
 
Conundrum's Avatar
 
Join Date: Oct 2008
Location: Parsons, KS
Posts: 652
Re: "Sin-thia" My 74 GMC

Quote:
Originally Posted by jcspaek009 View Post
so is it forsure that 6 inch's has to come off the rear? how many bolts hold on a short box to a frame, hey rs72z would you happen to have a link to the article for shorting frames
There are 8 bolts holding the short beds on as well.

Quote:
Originally Posted by Corts60 View Post
Great work man! I love the look of this truck.
Thanks.
Posted via Mobile Device
__________________
74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r
http://67-72chevytrucks.com/vboard/s...d.php?t=460030


97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver
220,000 miles, all stock for now
Conundrum is offline   Reply With Quote
Old 10-26-2011, 10:02 PM   #62
jcspaek009
Registered User
 
jcspaek009's Avatar
 
Join Date: Oct 2011
Location: Calgary, Alberta
Posts: 26
Re: "Sin-thia" My 74 GMC

Are you sure about the 8 bolts conundrum cuz I looked at a short box today and I only seen 4, 2 near the front of the box and 2 right at the end. I might be wrong but that all I seen on this truck, and the guy said it totally original.I have been wrong before. Lol
Posted via Mobile Device
__________________
1950 Chevy 1/2 ton short box
1975 C10 project
2006 Nissan Titan
2007 Saturn Outlook
2008 Yz250f
jcspaek009 is offline   Reply With Quote
Old 10-26-2011, 10:12 PM   #63
Conundrum
Registered User
 
Conundrum's Avatar
 
Join Date: Oct 2008
Location: Parsons, KS
Posts: 652
Re: "Sin-thia" My 74 GMC

Mine takes 8
Posted via Mobile Device
__________________
74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r
http://67-72chevytrucks.com/vboard/s...d.php?t=460030


97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver
220,000 miles, all stock for now
Conundrum is offline   Reply With Quote
Old 10-26-2011, 10:26 PM   #64
rs72z
Registered User
 
rs72z's Avatar
 
Join Date: Oct 2011
Location: Emory TX
Posts: 900
Re: "Sin-thia" My 74 GMC

He's right on the 8 bolts, just looked at my 87 scsb. 2 at the front and 2 at the rear.
rs72z is offline   Reply With Quote
Old 10-27-2011, 05:44 PM   #65
Conundrum
Registered User
 
Conundrum's Avatar
 
Join Date: Oct 2008
Location: Parsons, KS
Posts: 652
Re: "Sin-thia" My 74 GMC

It's not much, but I did something.

Cut the 2 pieces off the frame for radiator/support clearance and seen I also have to clearance the radiator support to clear the steering box as well....





Luckily this radiator support isn't much good so it'll allow me to get the clearance I need and then I can figure out how to do my good one so it looks good.

Also got some more pics of the truck....



I think it may be the angle, but I really like the second pic of the truck.
__________________
74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r
http://67-72chevytrucks.com/vboard/s...d.php?t=460030


97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver
220,000 miles, all stock for now
Conundrum is offline   Reply With Quote
Old 10-27-2011, 07:02 PM   #66
mcboomport
Registered User
 
mcboomport's Avatar
 
Join Date: Oct 2010
Location: Portland, OR
Posts: 320
Re: "Sin-thia" My 74 GMC

Nice dude! I'm digging those wheels!
mcboomport is offline   Reply With Quote
Old 10-27-2011, 07:23 PM   #67
jcspaek009
Registered User
 
jcspaek009's Avatar
 
Join Date: Oct 2011
Location: Calgary, Alberta
Posts: 26
Re: "Sin-thia" My 74 GMC

Looking pimp bro. It sure is coming along.
Posted via Mobile Device
__________________
1950 Chevy 1/2 ton short box
1975 C10 project
2006 Nissan Titan
2007 Saturn Outlook
2008 Yz250f
jcspaek009 is offline   Reply With Quote
Old 11-09-2011, 02:06 PM   #68
jcspaek009
Registered User
 
jcspaek009's Avatar
 
Join Date: Oct 2011
Location: Calgary, Alberta
Posts: 26
Re: "Sin-thia" My 74 GMC

Any thing new going on with your truck? Just pick up a box for mine and all the measurement turned out awesome, only 4 out of the 8 bed bolts lined up.no big deal to drill 4 new holes tho.
Posted via Mobile Device
__________________
1950 Chevy 1/2 ton short box
1975 C10 project
2006 Nissan Titan
2007 Saturn Outlook
2008 Yz250f
jcspaek009 is offline   Reply With Quote
Old 11-09-2011, 07:02 PM   #69
Conundrum
Registered User
 
Conundrum's Avatar
 
Join Date: Oct 2008
Location: Parsons, KS
Posts: 652
Re: "Sin-thia" My 74 GMC

No not recently, haven't had much time.

Glad to hear yours is coming along.
Posted via Mobile Device
__________________
74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r
http://67-72chevytrucks.com/vboard/s...d.php?t=460030


97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver
220,000 miles, all stock for now
Conundrum is offline   Reply With Quote
Old 11-09-2011, 09:48 PM   #70
jcspaek009
Registered User
 
jcspaek009's Avatar
 
Join Date: Oct 2011
Location: Calgary, Alberta
Posts: 26
Re: "Sin-thia" My 74 GMC

ya its coming slowly, haha, just need to find a motor and tranny for it, thinking of a 350 for now with a turbo 400 behind it, what are you running in your c10? would you know how low i can go with my c10? i was hoping for a 5/7 drop but i heard that the lower control arms would rub on a stock 15" rim. its not a daily driver so i want it as low as possible.
__________________
1950 Chevy 1/2 ton short box
1975 C10 project
2006 Nissan Titan
2007 Saturn Outlook
2008 Yz250f
jcspaek009 is offline   Reply With Quote
Old 11-09-2011, 10:15 PM   #71
Conundrum
Registered User
 
Conundrum's Avatar
 
Join Date: Oct 2008
Location: Parsons, KS
Posts: 652
Re: "Sin-thia" My 74 GMC

I currently have a Pontiac 400, i'd like to find a 455, it currently has a turbo 350 bolted toit but if I run an auto i'll probably use the 2004R I have. I'd really like to run a manual trans, maybe a 6spd but that'll have to wait.

As far as how low you can go all depends on how low you want to go and the amount of work you're willing to do. So far the math on the amount of drop in the front of mine is 8". As far as a stock wheel rubbing will depend on backspacing with a 2.5" drop spindle, mine just barely touched in a couple places with a 15x8 rally so it wouldn't take much to get the needed clearance. If you use a 3" spindle, your backspacing is more important.
Posted via Mobile Device
__________________
74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r
http://67-72chevytrucks.com/vboard/s...d.php?t=460030


97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver
220,000 miles, all stock for now
Conundrum is offline   Reply With Quote
Old 11-16-2011, 11:01 PM   #72
Conundrum
Registered User
 
Conundrum's Avatar
 
Join Date: Oct 2008
Location: Parsons, KS
Posts: 652
Re: "Sin-thia" My 74 GMC

Quote:
Originally Posted by mcboomport View Post
Nice dude! I'm digging those wheels!
Quote:
Originally Posted by jcspaek009 View Post
Looking pimp bro. It sure is coming along.
Posted via Mobile Device

Thanks guys.

I'm hoping to have another update soon, although it may only be a small one. With it getting colder outside, I have been spending a lot of time thinking about what I want to do to it. So far I have decided to do a manual trans, 4, 5 or 6spd all depends on what I get my hands on. Although if I do a 6spd i'll need to ditch the 3.08s that are in that rearend for sure. And i'm considering swapping out the leaf springs for some truck arms, if I go with the arms I can get all that stuff for free from my dad.
__________________
74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r
http://67-72chevytrucks.com/vboard/s...d.php?t=460030


97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver
220,000 miles, all stock for now
Conundrum is offline   Reply With Quote
Old 11-28-2011, 10:57 PM   #73
Conundrum
Registered User
 
Conundrum's Avatar
 
Join Date: Oct 2008
Location: Parsons, KS
Posts: 652
Re: "Sin-thia" My 74 GMC

I got a little done over the weekend, I trimmed the radiator support to fit around the steering box, put the drivers fender on, set the hood on and put my grille and headlight bezels back on. Pulled my bed off and removed the bumpstops, then put the bed back on. I'll post some pics in the next day or 2.
__________________
74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r
http://67-72chevytrucks.com/vboard/s...d.php?t=460030


97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver
220,000 miles, all stock for now
Conundrum is offline   Reply With Quote
Old 12-12-2011, 07:48 PM   #74
Conundrum
Registered User
 
Conundrum's Avatar
 
Join Date: Oct 2008
Location: Parsons, KS
Posts: 652
Re: "Sin-thia" My 74 GMC

I'm a little behind on my update LOL

Here are some pics from yesterday.....




And this one shows the bumper I picked up the previous weekend for $10, it had never been mounted but it is a foreign repop so it's got some rust on the top side that's pretty rough. But I have plans for it then it'll get powder coated either black, silver or white, I haven't decided just yet.....



But this may be the last update til spring, with no heat in the garage it's a little hard to work on the truck.
__________________
74 GMC SWB Project "Sin-thia" Static Dropped 8"f/10"r
http://67-72chevytrucks.com/vboard/s...d.php?t=460030


97 GMC reg cab short bed, 4.3V6 / 5spd, daily driver
220,000 miles, all stock for now
Conundrum is offline   Reply With Quote
Old 12-12-2011, 08:34 PM   #75
franky69c10
chevy runs deep
 
franky69c10's Avatar
 
Join Date: Mar 2006
Location: PHOENIX AZ
Posts: 1,074
Re: "Sin-thia" My 74 GMC

nice
__________________
RAIDER NATION


1969 c10 swb soon 2 b on the road...

My LWB is a SWB now
http://67-72chevytrucks.com/vboard/s...d.php?t=498241
franky69c10 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:07 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com