UT $1.00 60-63 C10 Cab Cuts

[67see10]

Originally Posted by DPowers

Ill take this section right here please. Shipping to 37843. Let me know how you want paid.

Here’s a picture of the cut

[67see10]

Originally Posted by darkhorse970

I’d like to have one side of the dash, for the “hump” portion on top.

Which one would you like?

[67see10]

Originally Posted by lownslw64

Can i get this section cut out please? let me know how much to 94513. Thanks

Here’s a picture of the cut

[lownslw64]

Originally Posted by 67see10

Here’s a picture of the cut

perfect. let me know how much to 94513 and what is your paypal. thanks!

[darkhorse970]

Originally Posted by 67see10

Which one would you like?

I will take the glove box side. If the glove box door is available I’d like to have it too. Thanks!

[67see10]

Originally Posted by cwcarpenter98

That's ok. If the rust isn't completely through on either side, I need both of these circled sections. I have not cut into my truck yet to see the extent of the rust, but I know it looks pretty bad from the outside, especially on the passenger side. Just to be on the safe side, if you are willing to cut out the inside section with it, that would be great. I don't need the roof skin though. Seam sealer deteriorated and let water rust out the upper lip areas.

My zip is 30188

Thanks!

*Edit* I will go check on my cab in a couple minutes to see if I need the inside part or not.

Pictures

[DPowers]

Originally Posted by 67see10

Here’s a picture of the cut

Great
Let me know how much and how you want paid.

[darkhorse970]

Originally Posted by darkhorse970

I will take the glove box side. If the glove box door is available I’d like to have it too. Thanks!

Let me know how much I owe you, I appreciate it!

[GranPanteraRoja]

Hi,

I would like to following section on the driver's side corner around the gas tank filler shipped to 30032. Please let me know how you would like payment.



Thank you!

[cwcarpenter98]

Got my pieces yesterday. Just what I needed, thanks!

[Ennehazrad]

Was wondering first if you could provide a cut from the passenger side corner and if so, how much for the part + shipping? The attached pic will give you the details but if you need anymore info please let me know.
Posted via Mobile Device

[Ennehazrad]

Was wondering first if you could provide a cut from the passenger side corner and if so, how much for the part + shipping? The attached pic will give you the details but if you need anymore info please let me know.
Posted via Mobile Device

[Brad54]

If it's still there, I'd like to get the area along the bottom edge of the back of the cab, the pinch weld that goes from the cab corner, up over the frame, from the driver side to the passenger side.