What year quartz clock is this from? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70c10 · 04-15-2002, 10:49 AM

Hey guys,
I saw this cool bezel setup for our trucks on ebay. What is this clock out of?

Cheyenne Super · 04-15-2002, 11:17 AM

If I am not mistaken that is a clock that GM had BorgWarner make up as an accessory to fit in the same place you have it in. It never made it to the accessory list b/c the '67-'72 series was almost to an end of it's "era".

tom hand · 04-15-2002, 11:34 AM

I had an 86 chevy truck that had a clock like that in it.

------------------
72 GMC Sierra SWB almost finished---- 84 Softail
Olive Branch MS

70c10 · 04-15-2002, 11:38 AM

I'll have to check my local junk yards to see if this is the exact type in a 86'.

barn9 · 04-15-2002, 11:39 AM

Looks to me like the clock is a little off from fitting the hole due to the stem. Makes me wonder if it was a console clock from a '65-'68 chevy that has been adapted to go in that dash. Can't remember what years they used those clocks for sure.

------------------[*]'71 Cheyenne, 402BB[*]Winfield, KS[*] http://barn9.freeservers.com

72chevyLWB · 04-15-2002, 11:53 AM

My 87 has that exact one

------------------
72 Chevy C/10
87 Chevy Silverado 4X4
www.geocities.com/chevylwb/chevylwb.html
Aberdeen South Dakota

70c10 · 04-15-2002, 11:59 AM

Sounds like this should be easy to find. Hopefully hooking it up will be just a hot and a ground!

O'l Buck · 04-15-2002, 12:36 PM

looks just like the clock in my 87 that i have in the junkyard, and like the one in my dad's 84.

------------------
Ol' Buck: '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84
ralleys and 31/10.5s

Angel girl: 67 Cutlass convertible
330, 3spd stick

Greener: 90 GMC Jimmy
350/auto
Chad Stephens
Orleans,NE

no name yet: 72 442 under serious construction

Andy4639 · 04-15-2002, 07:42 PM

This is the clock I installed from a 80'S model Chevy truck. It only has a hot and ground wire. You have to cut out the back for the hook ups. It iis very simple to do. Just about any truck of the 80 should have these and all I did was install it. It was taken straight out of the junk yard and installed.

------------------
Andy
71's Are for ever!!! or 67,68,69,70,72

www.geocities.com/chevy71tpi/main.html]

www.picturetrail.com/Andy4639]

Hooter · 04-15-2002, 11:08 PM

make sure you get the clocks that say quartz on the face because the ones made before 1980 didnt have quartz movement and never work anymore
my 74 chevy has a clock which doesnt work and my 77 has a clock which also doesnt work

------------------

69 custom camper/cst 10
70 monte carlo
73 chevelle 4 door
deluxe"kermit": no carpet(rubber floor) no floor, no trunk still drives
74 cheyenne super 20 454
77 fully loaded silverado
that my Grandpa gave me
1980 BMW 320i(at least it isnt Japanese)
1984 Buick skyyhwak that i won
1972 Honda ct 90 trailbike

Castlegar B.C.The great white North (Canada Aye!)
Hooter_5@hotmail.com AC/DC RULES!!!
www.castlegar.com

04-15-2002, 10:49 AM	#1
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	What year quartz clock is this from? Hey guys, I saw this cool bezel setup for our trucks on ebay. What is this clock out of? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-15-2002, 11:17 AM	#2
Cheyenne Super Registered User Join Date: Mar 2002 Location: Efland, NC Posts: 303	If I am not mistaken that is a clock that GM had BorgWarner make up as an accessory to fit in the same place you have it in. It never made it to the accessory list b/c the '67-'72 series was almost to an end of it's "era". __________________ 1971 Cheyenne Super Soon to be converted to '68 front clip. Efland, NC

04-15-2002, 11:34 AM	#3
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	I had an 86 chevy truck that had a clock like that in it. ------------------ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

04-15-2002, 11:38 AM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	I'll have to check my local junk yards to see if this is the exact type in a 86'. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-15-2002, 11:39 AM	#5
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Looks to me like the clock is a little off from fitting the hole due to the stem. Makes me wonder if it was a console clock from a '65-'68 chevy that has been adapted to go in that dash. Can't remember what years they used those clocks for sure. ------------------[]'71 Cheyenne, 402BB[]Winfield, KS[*] http://barn9.freeservers.com __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

04-15-2002, 11:53 AM	#6
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	My 87 has that exact one ------------------ 72 Chevy C/10 87 Chevy Silverado 4X4 www.geocities.com/chevylwb/chevylwb.html Aberdeen South Dakota __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

04-15-2002, 11:59 AM	#7
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Sounds like this should be easy to find. Hopefully hooking it up will be just a hot and a ground! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-15-2002, 12:36 PM	#8
O'l Buck Recovering Truck Driver Join Date: Mar 2002 Location: Orleans, NE USA Posts: 1,883	looks just like the clock in my 87 that i have in the junkyard, and like the one in my dad's 84. ------------------ Ol' Buck: '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84 ralleys and 31/10.5s Angel girl: 67 Cutlass convertible 330, 3spd stick Greener: 90 GMC Jimmy 350/auto Chad Stephens Orleans,NE no name yet: 72 442 under serious construction __________________ 67 K-20 350, SM465, Eaton rear, 4.56 no spin option 00 Dodge 2500 4x4, 24V cummins, 5 speed Chad South Central Nebraska

04-15-2002, 07:42 PM	#9
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	This is the clock I installed from a 80'S model Chevy truck. It only has a hot and ground wire. You have to cut out the back for the hook ups. It iis very simple to do. Just about any truck of the 80 should have these and all I did was install it. It was taken straight out of the junk yard and installed. ------------------ Andy 71's Are for ever!!! or 67,68,69,70,72 www.geocities.com/chevy71tpi/main.html] www.picturetrail.com/Andy4639] __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

04-15-2002, 11:08 PM	#10
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,078	make sure you get the clocks that say quartz on the face because the ones made before 1980 didnt have quartz movement and never work anymore my 74 chevy has a clock which doesnt work and my 77 has a clock which also doesnt work ------------------ 69 custom camper/cst 10 70 monte carlo 73 chevelle 4 door deluxe"kermit": no carpet(rubber floor) no floor, no trunk still drives 74 cheyenne super 20 454 77 fully loaded silverado that my Grandpa gave me 1980 BMW 320i(at least it isnt Japanese) 1984 Buick skyyhwak that i won 1972 Honda ct 90 trailbike Castlegar B.C.The great white North (Canada Aye!) Hooter_5@hotmail.com AC/DC RULES!!! www.castlegar.com __________________ MEMBER DISCS UP FRONT CLUB 69 custom camper/cst 10 70 monte carlo 383 stroker with a 700r4 77 fully loaded silverado (back in the backyard for a little while longer) 1980 BMW 320i (back in the garage finally) 1981 f@*d f150 4x4 (Robert red ford) tried to kill me 1972 Honda ct 90 trailbike Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com AC/DC RULES!!! First generation Monte Carlo club pictures of my life



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.