OK EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chubinit · 08-08-2012, 10:41 AM

Noticed the 6 lug aluminum slots in photo bucket...Set of 4? What diatmeter, width, 5.5"? Condition? (would like pics of set) How much shipped to 27892?
Thank you much, chubinit

Tinkermc · 08-08-2012, 12:40 PM

How much for stepside for chevy marked tailgate 23901?

MoreLoveThanMoney · 08-08-2012, 01:09 PM

Quote:

Originally Posted by 70STOVEBOLT

I am looking for a driver's door (truck), passenger fender (69-72 chevy), and fleetside wheel tubs. Shipping would be to 46562 and I could arrange it if it was palletized. Let me know if any of this gets to me.

Thanks,
Mark

I have a very nice passenger door that looks to be rust free and dent free except for two spots. One on the outside where the mirror bolted up. Its minor. One on the interior from the elbow pushing the door open. Both very fixable. Are you wanting me to just get everything on a pallet and you will arrange pick up? if so, I could have it ready over the weekend and ready for pick up next week. I took some pics of the door.

MoreLoveThanMoney · 08-08-2012, 01:19 PM

Quote:

Originally Posted by My72BB

Interested in pictures of LWB w/tool box storage. What are you asking for it as well?

Alan

The bed is in nice shape. Has a small area in need of straightening towards the rear passenger side of the marker light area. You might be able to notice it in the pics. I was mistaken about the storage box. It is really nice. No noticable rust through areas. Its the door that needs some work. The bed is a wood floor bed which is there bed not very good shape. Im really not sure what the bed is worth. If you have an idea please let me know. There is a tail gate on the bed now. McBassin is first in line for it and hes going to look at it this weekend. If he passes, it will be available

MoreLoveThanMoney · 08-08-2012, 01:22 PM

Quote:

Originally Posted by Jdhitch

Could you put me in line for the passenger shortbox bedside? Shipping to 98373

The only passenger step side side I have is on the blue bed. I wasnt wanting to strip it apart but will if there is enough interest in the other parts. I was hoping to just sell that bed as it is.

MoreLoveThanMoney · 08-08-2012, 01:23 PM

Quote:

Originally Posted by sboris

Second I think.. Behind 70stovebolt on fleet wheel tubs.
Posted via Mobile Device

Stovebolt is first in line but I have two sets of wheel tubs. If you are interested just let me know.

MoreLoveThanMoney · 08-08-2012, 01:26 PM

Quote:

Originally Posted by midniteblues

Hey if the yellow one are the one's you are offering I will take them.

I would rather have the blue one's on the bed but the yellow's would work for me.

I dont need the step braces would you consider any less $ without the braces?

I wasnt wanting to tear that bed apart if I could keep from it. The yellow ones are nice shape and I think youd be happy with them. The braces are a freebie!!! Just let me know what you think I will get them headed your way. I would be willing to consider a lesser amount regardless of the braces.

MoreLoveThanMoney · 08-08-2012, 01:30 PM

Quote:

Originally Posted by chubinit

Noticed the 6 lug aluminum slots in photo bucket...Set of 4? What diatmeter, width, 5.5"? Condition? (would like pics of set) How much shipped to 27892?
Thank you much, chubinit

I do have a set of four. Not sure on the width but I can measure. I do know they are 15". I havent looked at them in a while but from what I remember they are in great condition. I will check and get you some pics. Let me get you some more info and we can talk price. Ill make it worth your while if interested.

MoreLoveThanMoney · 08-08-2012, 01:33 PM

Quote:

Originally Posted by Tinkermc

How much for stepside for chevy marked tailgate 23901?

A new aftermarket tailgate is around $450. I was hoping to get $200 for the ones that I have. Im not sure of the weight but I am guessing shipping would be around $40-50 if it can go FedEx. Ill try and pin that down for you.

sboris · 08-08-2012, 02:53 PM

Quote:

Originally Posted by MoreLoveThanMoney

Stovebolt is first in line but I have two sets of wheel tubs. If you are interested just let me know.

Yes interested.. They can have dings, but the "flanges or lip"must not be rusted
Out. Pic? 50213 zip. Thanks
Shawn
Posted via Mobile Device

midniteblues · 08-08-2012, 10:03 PM

Quote:

Originally Posted by MoreLoveThanMoney

I wasnt wanting to tear that bed apart if I could keep from it. The yellow ones are nice shape and I think youd be happy with them. The braces are a freebie!!! Just let me know what you think I will get them headed your way. I would be willing to consider a lesser amount regardless of the braces.

Cool,I will take the yellow steps Would you do the $70 shipped to 19559? lmk

MoreLoveThanMoney · 08-08-2012, 10:32 PM

Quote:

Originally Posted by midniteblues

Cool,I will take the yellow steps Would you do the $70 shipped to 19559? lmk

Yes I will. Send me a PM with some details of an address and a PayPal address so I can send you a request.

MoreLoveThanMoney · 08-08-2012, 10:34 PM

Quote:

Originally Posted by sboris

Yes interested.. They can have dings, but the "flanges or lip"must not be rusted
Out. Pic? 50213 zip. Thanks
Shawn
Posted via Mobile Device

I will get the pics posted in the morning so you can see first hand and then we can discuss from there.

Ezzz · 08-09-2012, 02:34 AM

I want your '72 grill. Can you find out what shipping to 91311 would be?

dropanddrag71 · 08-09-2012, 07:56 AM

I need either a 4 groove crank pulley or a 2 groove power steering pulley for my 70 c 20 350?

**70STOVEBOLT** · 08-09-2012, 08:12 AM

Quote:

Originally Posted by MoreLoveThanMoney

I have a very nice passenger door that looks to be rust free and dent free except for two spots. One on the outside where the mirror bolted up. Its minor. One on the interior from the elbow pushing the door open. Both very fixable. Are you wanting me to just get everything on a pallet and you will arrange pick up? if so, I could have it ready over the weekend and ready for pick up next week. I took some pics of the door.

I was looking for a driver's door. If you have one in as good of shape as this passenger one, let me know what you want for it. Also, on the wheel tubs, if they are rust-free and not heavily dented I will take them and I can arrange shipping. Let me know if you have the driver's door. I was also looking for a passenger fender, preferrably without trim holes. Sorry for the confusion. Let me know what you got and a total.

Thanks,
Mark

MoreLoveThanMoney · 08-09-2012, 08:09 PM

Quote:

Originally Posted by sboris

Yes interested.. They can have dings, but the "flanges or lip"must not be rusted
Out. Pic? 50213 zip. Thanks
Shawn
Posted via Mobile Device

These arent even dinged up really. The flanges are very solid. If stovebolt passes on the other set Ill let you know. They might be a tad nicer as far as straightness goes.

MoreLoveThanMoney · 08-09-2012, 08:12 PM

Quote:

Originally Posted by dropanddrag71

I need either a 4 groove crank pulley or a 2 groove power steering pulley for my 70 c 20 350?

Im sure I have it. Let me look in my storage this weekend and Ill let you know.

MoreLoveThanMoney · 08-09-2012, 08:15 PM

Quote:

Originally Posted by Ezzz

I want your '72 grill. Can you find out what shipping to 91311 would be?

Let me get you some photos so you can see it and I will get a price on the shipping for you. The grill doesnt weigh much so I would guess around $25.

MoreLoveThanMoney · 08-09-2012, 08:15 PM

Quote:

Originally Posted by 70STOVEBOLT

I was looking for a driver's door. If you have one in as good of shape as this passenger one, let me know what you want for it. Also, on the wheel tubs, if they are rust-free and not heavily dented I will take them and I can arrange shipping. Let me know if you have the driver's door. I was also looking for a passenger fender, preferrably without trim holes. Sorry for the confusion. Let me know what you got and a total.

Thanks,
Mark

I am going to PM you

MoreLoveThanMoney · 08-09-2012, 08:33 PM

I have gone back through all of the post and reread everything. I think I have responded to everybody. If I have not, please let me know. Dont want anybody to get left out!!!
Thanks again for all of the interest and look forward to meeting everybody who have planned a meeting

midniteblues · 08-09-2012, 08:48 PM

pay pal payment sent for the steps thanks

sboris · 08-09-2012, 09:04 PM

Quote:

Originally Posted by MoreLoveThanMoney

These arent even dinged up really. The flanges are very solid. If stovebolt passes on the other set Ill let you know. They might be a tad nicer as far as straightness goes.

Thanks for the pics. I'll take your best set "behind" stovebolt to 50213. Thanks. Let me know. No big hurry, will wait on stovebolt deal to go through..
Posted via Mobile Device

dropanddrag71 · 08-09-2012, 09:09 PM

Quote:

Originally Posted by MoreLoveThanMoney

Im sure I have it. Let me look in my storage this weekend and Ill let you know.

Keep me posted

MoreLoveThanMoney · 08-09-2012, 11:37 PM

Quote:

Originally Posted by chubinit

Noticed the 6 lug aluminum slots in photo bucket...Set of 4? What diatmeter, width, 5.5"? Condition? (would like pics of set) How much shipped to 27892?
Thank you much, chubinit

Wheels are 15x7. They need some cleaning but I wasnt able to find any road rash or any noticable damage. I took a pic of one. The condition of it is consistent with the other 3. Let me know if you are interested. Shipping will be no problem and it the freight would be about $75. PS I do not have center caps

08-08-2012, 10:41 AM	#51
chubinit Registered User Join Date: May 2012 Location: Williamston, NC Posts: 37	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More Noticed the 6 lug aluminum slots in photo bucket...Set of 4? What diatmeter, width, 5.5"? Condition? (would like pics of set) How much shipped to 27892? Thank you much, chubinit

08-08-2012, 12:40 PM	#52
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,027	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More How much for stepside for chevy marked tailgate 23901?

08-09-2012, 02:34 AM	#64
Ezzz Registered User Join Date: Jun 2012 Location: Chatsworth, CA Posts: 47	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More I want your '72 grill. Can you find out what shipping to 91311 would be?

08-09-2012, 07:56 AM	#65
dropanddrag71 Registered User Join Date: Jul 2012 Location: Central florida Posts: 178	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More I need either a 4 groove crank pulley or a 2 groove power steering pulley for my 70 c 20 350? __________________ " You are only coming threw in waves,... Your lips move, but i can't hear what your saying"

08-09-2012, 08:33 PM	#71
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More I have gone back through all of the post and reread everything. I think I have responded to everybody. If I have not, please let me know. Dont want anybody to get left out!!! Thanks again for all of the interest and look forward to meeting everybody who have planned a meeting

08-09-2012, 08:48 PM	#72
midniteblues Registered User Join Date: Jul 2011 Location: strausstown pa Posts: 3,394	Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More pay pal payment sent for the steps thanks __________________ 81 camaro 355 4/spd 342 posi my first love. 67 swb step 454/4spd ott 373 posi 4/7 drop. 2000 s10 zr2 little blue truck that never gets stuck. '74 heald super bronc vt8. tecumseh powered moon rover.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.