OR Parting out 72 Suburban C10 402 TH400 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Pmarti69 · 04-21-2012, 03:25 PM

Do you still have the 71-72 gas pedal assy with TH400 switch and wiring to engine harness. If so can you post a picture of it. Thanks again, I was able to find TH400 locally. Thanks Paul

Pmarti69 · 04-23-2012, 09:00 AM

Quote:

Originally Posted by Pmarti69

Do you still have the 71-72 gas pedal assy with TH400 switch and wiring to engine harness. If so can you post a picture of it. Thanks again, I was able to find TH400 locally. Thanks Paul

Bump

Pmarti69 · 04-21-2012, 08:41 PM

Looking to see if you have the items in the pictures with the rollers on the regulators in good shape as well the lock mechanisms for both door. Priced shipped to 77345, Thanks Paul. I just saw you had what i need for the doors.

Pmarti69 · 04-23-2012, 08:37 AM

Quote:

Originally Posted by Pmarti69

Looking to see if you have the items in the pictures with the rollers on the regulators in good shape as well the lock mechanisms for both door. Priced shipped to 77345, Thanks Paul. I just saw you had what i need for the doors.

Disregard on the window regulators, strike plate, found two doors in my area, thanks Paul

notsolo · 04-24-2012, 12:09 PM

Quote:

Originally Posted by Pmarti69

Looking to see if you have the items in the pictures with the rollers on the regulators in good shape as well the lock mechanisms for both door. Priced shipped to 77345, Thanks Paul. I just saw you had what i need for the doors.

Hey Tom I could use rt side door hinges for 72 blazer and left window regulator. (Hoping its the same as what you have) inside door handles and winder handles both sides. Cost with shipping to 21863 .... Thanks... Ed

**tll74** · 04-24-2012, 08:32 PM

Quote:

Originally Posted by notsolo

Hey Tom I could use rt side door hinges for 72 blazer and left window regulator. (Hoping its the same as what you have) inside door handles and winder handles both sides. Cost with shipping to 21863 .... Thanks... Ed

Ed, nice original hinges dipped (I have tons of these) and ready for paint 35.00, 72 only RH window reg. good rollers 25.00, 8.00 for all four inner handles. I'll pick out the best four out of my stash. Shipping 14.00 Thanks, Tom

**tll74** · 04-25-2012, 11:35 AM

pic of the gas pedal.

notsolo · 04-25-2012, 12:40 PM

Quote:

Originally Posted by tll74

Ed, nice original hinges dipped (I have tons of these) and ready for paint 35.00, 72 only RH window reg. good rollers 25.00, 8.00 for all four inner handles. I'll pick out the best four out of my stash. Shipping 14.00 Thanks, Tom

Thanks Tom... Payment sent,Looking forward to ready to paint parts...Ed

**haskell** · 05-02-2012, 09:00 AM

I will take the cover plates for the rear doors if still available. Will take the wing nut and retainer for spare if still available.

Also do you have the splash shield that mounts behind the driver side rear tire? Condition and price if you do please.

Shipping would be to 46240

1lo67 · 05-02-2012, 05:32 PM

Here's a pic of the section i'm needing from both sides. just let me know what you come up with....37860
Thanks

wrwelton · 05-02-2012, 07:31 PM

Iam looking for the legs and tracks for a bench seat. I have a seat but no hardware underneath

**tll74** · 05-03-2012, 01:32 AM

Seat belt pics. There is some stains in the center belts they are hard to see in the pics. The male buckles have some rust as the pics shows and the female halfs have some discoloration. The outer plastic covers are nice and one retractor is a bit lazy.

**tll74** · 05-03-2012, 01:39 AM

more belt pics

**LockDoc** · 05-03-2012, 12:07 PM

Quote:

Originally Posted by tll74

more belt pics

I will take the Parchment seat belts and body plugs in the other thread if you want to do some trading on the key blanks and door lock gaskets you want.

PM sent.

LockDoc

DINS 1 · 05-03-2012, 03:47 PM

Is the one you have cut off from a lift gate truck? I would need The roof cur behind the rear door frame and down the post about 4 inches in to the side window. cuts would be in green. price and shipping to 50595

**LockDoc** · 05-25-2012, 11:33 PM

Quote:

Originally Posted by LockDoc

I will take the Parchment seat belts and body plugs in the other thread if you want to do some trading on the key blanks and door lock gaskets you want.

PM sent.

LockDoc

Tom,

Still interested in the Parchment seat belts from this thread and the body plugs from your other thread. I need the belts to finish up the Suburban so I can start driving it.

Thanks.
LockDoc

**tll74** · 05-03-2012, 02:01 AM

Quote:

Originally Posted by DINS 1

do you still have the body around looking for a upper rear door panel as marked price with shipping. the body part not the liftgate

I have this cut off another 72 that I just drug home last night. How far forward from the drip rail and how far down the post?

Quote:

Originally Posted by haskell

I will take the cover plates for the rear doors if still available. Will take the wing nut and retainer for spare if still available.

Also do you have the splash shield that mounts behind the driver side rear tire? Condition and price if you do please.

Shipping would be to 46240

The spare parts are sold. I have all the covers still and also have the splash shield. 25.00 on the shield. 35.00 if I hot tank and acid dip it. Shipping on all of it would run about 15.00

Quote:

Originally Posted by 1lo67

Here's a pic of the section i'm needing from both sides. just let me know what you come up with....37860
Thanks

That's what I thought from your description. I'm thinking 225.00 for the cuts plus shipping. If interested I can get a shipping cost.

Quote:

Originally Posted by wrwelton

Iam looking for the legs and tracks for a bench seat. I have a seat but no hardware underneath

40.00 for the seat tracks complete. plus shipping

Thanks to all, Tom

**haskell** · 05-03-2012, 11:35 PM

I will take the cover plates for the rear doors if still available. Will take the wing nut and retainer for spare if still available.

Also do you have the splash shield that mounts behind the driver side rear tire? Condition and price if you do please.

Shipping would be to 46240
The spare parts are sold. I have all the covers still and also have the splash shield. 25.00 on the shield. 35.00 if I hot tank and acid dip it. Shipping on all of it would run about 15.00

I will take the covers and splash shield. Go ahead an hot tank and dip. Shipping to 46240. Please pm payment details. Do you just want $15 for shipping or will that be priced when packed?

Tim

**tll74** · 05-04-2012, 01:29 AM

Tim, It will take a few days for the process of the splash shield. 15.00 will work fine for shipping. I'll PM the payment info. Thanks, Tom

**tll74** · 05-04-2012, 02:06 AM

Pics for budnikguy

budnikguy · 05-09-2012, 09:52 AM

Will take the gb door also, almost have everything put together to ship?

Adam

Quote:

Originally Posted by tll74

Pics for budnikguy

**tll74** · 05-09-2012, 06:00 PM

Adam, I'm out of town till Friday. It's all ready so Friday I could ship it all out. Thanks, Tom
Posted via Mobile Device

DINS 1 · 05-09-2012, 07:01 AM

i will pass on the upper door cut found one locally

wrwelton · 05-09-2012, 06:18 PM

Any word on hardware on bottom of bench seat?

**restart42** · 05-11-2012, 05:13 PM

Hi Tom,,
You have'nt given me a price for the "Fuel Filler Neck" with shipping along with
the headliner bows and spare tire clamp,,,

Pat,,,

04-21-2012, 03:25 PM	#1
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: Parting out 72 Suburban C10 402 TH400 Do you still have the 71-72 gas pedal assy with TH400 switch and wiring to engine harness. If so can you post a picture of it. Thanks again, I was able to find TH400 locally. Thanks Paul

04-21-2012, 08:41 PM	#3
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: Parting out 72 Suburban C10 402 TH400 Looking to see if you have the items in the pictures with the rollers on the regulators in good shape as well the lock mechanisms for both door. Priced shipped to 77345, Thanks Paul. I just saw you had what i need for the doors. Attached Images

04-25-2012, 11:35 AM	#7
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 Suburban C10 402 TH400 pic of the gas pedal. Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

05-02-2012, 09:00 AM	#9
haskell Registered User Join Date: Apr 2008 Location: Indianapolis, IN Posts: 391	Re: Parting out 72 Suburban C10 402 TH400 I will take the cover plates for the rear doors if still available. Will take the wing nut and retainer for spare if still available. Also do you have the splash shield that mounts behind the driver side rear tire? Condition and price if you do please. Shipping would be to 46240 __________________ 1969 Chev Longhorn Custom Camper 1955 Buick Century Estate Wagon 1963 Buick Riviera 1953 Chevy 3100 Panel 1967 C-20 V8 4 speed 1951 Willys Jeep Wagon 1956 Chevy Suburban

05-02-2012, 05:32 PM	#10
1lo67 Registered User Join Date: May 2005 Location: Morristown, Tn Posts: 275	Re: Parting out 72 Suburban C10 402 TH400 Here's a pic of the section i'm needing from both sides. just let me know what you come up with....37860 Thanks Attached Images

05-02-2012, 07:31 PM	#11
wrwelton Registered User Join Date: Mar 2006 Location: massachusetts Posts: 180	Re: Parting out 72 Suburban C10 402 TH400 Iam looking for the legs and tracks for a bench seat. I have a seat but no hardware underneath __________________ I know I can! I know i can! 72 K20 Restoration

05-03-2012, 01:32 AM	#12
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 Suburban C10 402 TH400 Seat belt pics. There is some stains in the center belts they are hard to see in the pics. The male buckles have some rust as the pics shows and the female halfs have some discoloration. The outer plastic covers are nice and one retractor is a bit lazy. Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw Last edited by tll74; 05-03-2012 at 01:45 AM.

05-03-2012, 01:39 AM	#13
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 Suburban C10 402 TH400 more belt pics Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

05-03-2012, 03:47 PM	#15
DINS 1 Registered User Join Date: Apr 2000 Location: Webster City, Iowa USA Posts: 572	Re: Parting out 72 Suburban C10 402 TH400 Is the one you have cut off from a lift gate truck? I would need The roof cur behind the rear door frame and down the post about 4 inches in to the side window. cuts would be in green. price and shipping to 50595 Attached Images __________________ Wade "DURAMAX BURB" Burb on 2004 chevy 2500HD 4x4 Duramax chassis Long term project 2004 2500HD 4x4 crew cab GMC Duramax 4" lift 35's 79 RS Camaro

05-03-2012, 11:35 PM	#18
haskell Registered User Join Date: Apr 2008 Location: Indianapolis, IN Posts: 391	Re: Parting out 72 Suburban C10 402 TH400 I will take the cover plates for the rear doors if still available. Will take the wing nut and retainer for spare if still available. Also do you have the splash shield that mounts behind the driver side rear tire? Condition and price if you do please. Shipping would be to 46240 The spare parts are sold. I have all the covers still and also have the splash shield. 25.00 on the shield. 35.00 if I hot tank and acid dip it. Shipping on all of it would run about 15.00 I will take the covers and splash shield. Go ahead an hot tank and dip. Shipping to 46240. Please pm payment details. Do you just want $15 for shipping or will that be priced when packed? Tim __________________ 1969 Chev Longhorn Custom Camper 1955 Buick Century Estate Wagon 1963 Buick Riviera 1953 Chevy 3100 Panel 1967 C-20 V8 4 speed 1951 Willys Jeep Wagon 1956 Chevy Suburban

05-04-2012, 01:29 AM	#19
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 Suburban C10 402 TH400 Tim, It will take a few days for the process of the splash shield. 15.00 will work fine for shipping. I'll PM the payment info. Thanks, Tom __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

05-04-2012, 02:06 AM	#20
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 Suburban C10 402 TH400 Pics for budnikguy Attached Images __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

05-09-2012, 06:00 PM	#22
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Parting out 72 Suburban C10 402 TH400 Adam, I'm out of town till Friday. It's all ready so Friday I could ship it all out. Thanks, Tom Posted via Mobile Device __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

05-09-2012, 07:01 AM	#23
DINS 1 Registered User Join Date: Apr 2000 Location: Webster City, Iowa USA Posts: 572	Re: Parting out 72 Suburban C10 402 TH400 i will pass on the upper door cut found one locally __________________ Wade "DURAMAX BURB" Burb on 2004 chevy 2500HD 4x4 Duramax chassis Long term project 2004 2500HD 4x4 crew cab GMC Duramax 4" lift 35's 79 RS Camaro

05-09-2012, 06:18 PM	#24
wrwelton Registered User Join Date: Mar 2006 Location: massachusetts Posts: 180	Re: Parting out 72 Suburban C10 402 TH400 Any word on hardware on bottom of bench seat? __________________ I know I can! I know i can! 72 K20 Restoration



Register or Log In To remove these advertisements.

05-11-2012, 05:13 PM	#25
restart42 Junior Member Join Date: Apr 2000 Location: Bronx, New York City Posts: 121	Re: Parting out 72 Suburban C10 402 TH400 Hi Tom,, You have'nt given me a price for the "Fuel Filler Neck" with shipping along with the headliner bows and spare tire clamp,,, Pat,,, __________________ Pat 72 GMC Suburban,4X4,402BB

Register or Log In To remove these advertisements.