The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-30-2020, 11:04 AM   #1
kens65fb
Registered User
 
Join Date: Dec 2018
Location: Dallas, PA
Posts: 544
Fuel pump to carb fuel line ?

Does anyone make a pre-bent fuel line for a SBC, from the fuel pump to carb?
kens65fb is offline   Reply With Quote
Old 09-30-2020, 12:07 PM   #2
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,557
Re: Fuel pump to carb fuel line ?

There are pre bent fuel lines..lots of variables though..more info would help...
Heres one for a 350/quadrajet... https://www.summitracing.com/parts/r...RoCfqUQAvD_BwE
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 09-30-2020, 03:09 PM   #3
kens65fb
Registered User
 
Join Date: Dec 2018
Location: Dallas, PA
Posts: 544
Re: Fuel pump to carb fuel line ?

Quote:
Originally Posted by mongocanfly View Post
There are pre bent fuel lines..lots of variables though..more info would help...
Heres one for a 350/quadrajet... https://www.summitracing.com/parts/r...RoCfqUQAvD_BwE
Thanks, I'm looking for a line to an Edelbrock carb
kens65fb is offline   Reply With Quote
Old 09-30-2020, 03:35 PM   #4
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,494
Re: Fuel pump to carb fuel line ?

You’ll need to make one.
Easy to do.
geezer#99 is offline   Reply With Quote
Old 09-30-2020, 04:25 PM   #5
Southcity
Registered User
 
Southcity's Avatar
 
Join Date: Aug 2007
Location: Redwood City, CA
Posts: 1,174
Re: Fuel pump to carb fuel line ?

Quote:
Originally Posted by geezer#99 View Post
You’ll need to make one.
Easy to do.
Geezer#99 is correct, creating your own line (bending/flaring) is very easy to do but will require you to purchase the specialized tools to do the job (flaring tool, bending tool) You may be reluctant to purchase the tools at first but you will be pleasantly surprised to find they come in handy often. My advice, spend a little extra $$ and get a quality flaring tool. You do not need to spend a lot on a bending tool and you will find there are many ways to bend line without one. You can make your own jig, use your hands, etc. I have found that aluminum fuel line works very well, it's lightweight and very easy to flare. You can purchase a roll from Summit or Jegs, it's cheap enough that you can make a few mistakes and have plenty left over for other projects. Another tip, use some small gauge wire or welding rod to help map out the route your line will take first, then use this as a reference when you bend your line. I used the Edelbrock single feed fuel line to start the job at the carb and finished it using aluminum fuel line and -6 AN fittings.
__________________
66 GMC Suburban Custom
66 Chevy K10 Suburban
Southcity is offline   Reply With Quote
Old 09-30-2020, 04:43 PM   #6
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,557
Re: Fuel pump to carb fuel line ?

Ditto to geezer...
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 09-30-2020, 05:54 PM   #7
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,723
Re: Fuel pump to carb fuel line ?

Fuel lines need a double flare.
AcampoDave is offline   Reply With Quote
Old 09-30-2020, 06:20 PM   #8
Southcity
Registered User
 
Southcity's Avatar
 
Join Date: Aug 2007
Location: Redwood City, CA
Posts: 1,174
Re: Fuel pump to carb fuel line ?

With a stock mechanical fuel pump the fuel pressure is anywhere between 4-8 lbs (depending on setup). So fuel lines do not require a double flare, single flare is plenty.
__________________
66 GMC Suburban Custom
66 Chevy K10 Suburban
Southcity is offline   Reply With Quote
Old 09-30-2020, 06:44 PM   #9
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,723
Re: Fuel pump to carb fuel line ?

Quote:
Originally Posted by Southcity View Post
With a stock mechanical fuel pump the fuel pressure is anywhere between 4-8 lbs (depending on setup). So fuel lines do not require a double flare, single flare is plenty.
Each unto their own then. As for me, if the line contains a highly flammable material at any pressure whatsoever, I'm going with a double flare.
AcampoDave is offline   Reply With Quote
Old 09-30-2020, 07:00 PM   #10
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,494
Re: Fuel pump to carb fuel line ?

On an eddy carb the last thing to do is bend up a solid line. Use rubber fuel line until you determine whether you need a fuel regulator or a heat spacer.. saves a bunch of frustration.
I bought a tubing bender at Home Depot like this one from harbour freight. Used pre flared pieces of tubing in short lengths bought at the parts store.


https://www.harborfreight.com/tubing-bender-3755.html
geezer#99 is offline   Reply With Quote
Old 05-11-2021, 11:40 PM   #11
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: Fuel pump to carb fuel line ?

I like the aluminum idea for fuel lines.
Anyone who has done this, what fittings did you use?
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 05-12-2021, 12:54 AM   #12
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: Fuel pump to carb fuel line ?

Although, I have seen some discussion about aluminum and ethanol fuel.
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 05-12-2021, 04:30 PM   #13
Southcity
Registered User
 
Southcity's Avatar
 
Join Date: Aug 2007
Location: Redwood City, CA
Posts: 1,174
Re: Fuel pump to carb fuel line ?

Quote:
Originally Posted by LostMy65 View Post
I like the aluminum idea for fuel lines.
Anyone who has done this, what fittings did you use?
1.Fuel line: I bought a roll of aluminum fuel line from Jegs (example: https://www.jegs.com/i/JEGS/555/1510...RoCAmcQAvD_BwE)
2. Fittings: I used -6 AN fittings in Black from a combination of Earls and Summit, both are available at Summit Racing.
3. If you run an Edelbrock carb you can purchase their fuel line kit (single feed or dual feed) for a nice clean install. (https://www.summitracing.com/parts/edl-81343)

Aluminum fuel line is very easy to work with and makes for clean easy bends with a simple tubing bender and super clean flares using a simple flaring tool. I have been running this setup for thousands of miles on a daily driven Suburban without issue.
__________________
66 GMC Suburban Custom
66 Chevy K10 Suburban
Southcity is offline   Reply With Quote
Old 05-12-2021, 05:00 PM   #14
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: Fuel pump to carb fuel line ?

Quote:
Originally Posted by Southcity View Post
1.Fuel line: I bought a roll of aluminum fuel line from Jegs (example: https://www.jegs.com/i/JEGS/555/1510...RoCAmcQAvD_BwE)
2. Fittings: I used -6 AN fittings in Black from a combination of Earls and Summit, both are available at Summit Racing.
3. If you run an Edelbrock carb you can purchase their fuel line kit (single feed or dual feed) for a nice clean install. (https://www.summitracing.com/parts/edl-81343)

Aluminum fuel line is very easy to work with and makes for clean easy bends with a simple tubing bender and super clean flares using a simple flaring tool. I have been running this setup for thousands of miles on a daily driven Suburban without issue.
Thanks, and no issues with ethanol fuel?
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Old 05-12-2021, 05:12 PM   #15
Southcity
Registered User
 
Southcity's Avatar
 
Join Date: Aug 2007
Location: Redwood City, CA
Posts: 1,174
Re: Fuel pump to carb fuel line ?

I've been running this setup on a daily driven Suburban for many thousands of miles over many years without issue. I believe it's when ethanol based fuels sit for very long periods of time that anything that comes in contact with it also suffers. This could be anything from rubber to aluminum to steel etc.
__________________
66 GMC Suburban Custom
66 Chevy K10 Suburban
Southcity is offline   Reply With Quote
Old 05-12-2021, 06:44 PM   #16
LostMy65
But Found Her 25yrs Later!
 
LostMy65's Avatar
 
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,457
Re: Fuel pump to carb fuel line ?

Quote:
Originally Posted by Southcity View Post
I've been running this setup on a daily driven Suburban for many thousands of miles over many years without issue. I believe it's when ethanol based fuels sit for very long periods of time that anything that comes in contact with it also suffers. This could be anything from rubber to aluminum to steel etc.
Thanks for this.
.
I agree.
__________________
I lost my 65 - Found it 25 years later:
http://67-72chevytrucks.com/vboard/s...d.php?t=426650

66 C20 Service Truck:
http://67-72chevytrucks.com/vboard/s...d.php?t=428035
LostMy65 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com