Shawno72's long overdue 68 daily driver build thread - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shawno72 · 01-06-2013, 11:50 PM

Next thing was to install a factory tach for my V8. At the same time I installed an air pressure gauge for the future bag install. Thanks go to Paul (PT'S 70 CST) for helping me come up with a way to manufacture an air line fitting for the back of the air gauge. I used all NOS gauges except for the tach.
Name: Picture 143.jpg
Views: 1725
Size: 44.3 KB

Name: Picture 143.jpg
Views: 1725
Size: 44.3 KB

Name: Picture 144.jpg
Views: 1713
Size: 49.9 KB

Name: Picture 145.jpg
Views: 1713
Size: 35.9 KB

shawno72 · 01-06-2013, 11:51 PM

I also installed a great working AM/FM factory radio that I got from a board member. Got a new speaker for dash and she sounds good considering the ancient technology.
Name: Picture 146.jpg
Views: 1738
Size: 54.9 KB

Name: Picture 146.jpg
Views: 1738
Size: 54.9 KB

Name: Picture 147.jpg
Views: 1734
Size: 92.1 KB

Name: Picture 148.jpg
Views: 1720
Size: 84.1 KB

Name: Picture 156.jpg
Views: 1717
Size: 38.9 KB

shawno72 · 01-06-2013, 11:54 PM

Here is a little C/10 Club get together at the A&W, recognize the board memebers? And no we weren't the only ones there, just the first there and last to leave.
Name: Picture 157.jpg
Views: 1800
Size: 41.0 KB

Name: Picture 157.jpg
Views: 1800
Size: 41.0 KB

Name: Picture 158.jpg
Views: 1797
Size: 42.7 KB

Name: Picture 159.jpg
Views: 1790
Size: 37.4 KB

Name: Picture 160.jpg
Views: 1796
Size: 53.8 KB

Name: Picture 161.jpg
Views: 1793
Size: 41.9 KB

shawno72 · 01-06-2013, 11:56 PM

More and here is my truck being used as a truck. Thats whats nice about patina, you don't care about the paint

Name: Picture 162.jpg
Views: 1720
Size: 42.0 KB

Name: Picture 175.jpg
Views: 1720
Size: 27.4 KB

Name: Picture 178.jpg
Views: 1723
Size: 51.0 KB

Name: Picture 179.jpg
Views: 1715
Size: 72.6 KB

shawno72 · 01-06-2013, 11:59 PM

Time to deal with the rear end. I got a good used 3.07 posi rear end from Devin (DSIGH) and it was time to loose the old 3.73's. At the same time I went ahead and notched the rear with a CPP notch. Thanks go to Lodi Transmission for helping me to set the back lash of the rear gears.
Name: Picture 181.jpg
Views: 1718
Size: 37.9 KB

Name: Picture 181.jpg
Views: 1718
Size: 37.9 KB

Name: Picture 182.jpg
Views: 1713
Size: 64.2 KB

Name: Picture 183.jpg
Views: 1715
Size: 75.2 KB

Name: Picture 184.jpg
Views: 1720
Size: 63.6 KB

shawno72 · 01-07-2013, 12:00 AM

Notch pics.
Name: Picture 185.jpg
Views: 1728
Size: 59.1 KB

Name: Picture 186.jpg
Views: 1718
Size: 41.8 KB

Bennett68C10 · 01-07-2013, 12:01 AM

Subscribed, glad you decided to do a build thread
Posted via Mobile Device

shawno72 · 01-07-2013, 12:03 AM

Next I bought a van tilt from the Stockton swap meet. I then had Kevin (KevsClassics) totally restore it. Let me tell you Kevin does awesome work and takes care of his customers, anyone who needs help with their tilt need to contact Kevin. Kevin even installed it for me and pushed the column further in to give more cab room.
Name: Picture 187.jpg
Views: 1774
Size: 57.3 KB

Name: Picture 187.jpg
Views: 1774
Size: 57.3 KB

Name: Picture 188.jpg
Views: 1763
Size: 61.2 KB

Name: Picture 189.jpg
Views: 1758
Size: 64.7 KB

Name: Picture 190.jpg
Views: 1760
Size: 59.4 KB

shawno72 · 01-07-2013, 12:08 AM

Back in October you may have heard, or should of heard of, the world famous 7th Annual C/10 Club Get Toghether at Rene's (C/10 king) house. What a blast and I can not wait for the next one. Anyways here are some pics of the caravan that I help put together. Many board members and a few of my friends were in for the hour plus drive to Rene's house. We stopped at a couple places to pick up more people along the way.
Name: 2012_C-10_pic-2.jpg
Views: 1705
Size: 107.6 KB

Name: 2012_C-10_pic-2.jpg
Views: 1705
Size: 107.6 KB

Name: Picture 191.jpg
Views: 1707
Size: 37.1 KB

Name: Picture 194.jpg
Views: 1702
Size: 40.0 KB

Name: Picture 195.jpg
Views: 1704
Size: 35.8 KB

Name: Picture 196.jpg
Views: 1697
Size: 40.4 KB

shawno72 · 01-07-2013, 12:10 AM

More

Name: Picture 197.jpg
Views: 1694
Size: 40.8 KB

Name: Picture 198.jpg
Views: 1705
Size: 74.6 KB

Name: Picture 199.jpg
Views: 1706
Size: 41.8 KB

Name: Picture 200.jpg
Views: 1701
Size: 44.1 KB

Name: Picture 201.jpg
Views: 1702
Size: 36.3 KB

shawno72 · 01-07-2013, 12:11 AM

more

Name: Picture 202.jpg
Views: 1696
Size: 51.1 KB

Name: Picture 203.jpg
Views: 1702
Size: 63.3 KB

Name: Picture 204.jpg
Views: 1699
Size: 64.8 KB

Name: Picture 205.jpg
Views: 1700
Size: 49.5 KB

Name: Picture 207.jpg
Views: 1701
Size: 70.1 KB

shawno72 · 01-07-2013, 12:15 AM

One more of Rene's. I bought a plain aftermarket tailgate of CL for $80 and while I don't like the plain style I couldn't pass up the price for a new gate. I got a great used tailgate band from David (one of the flying Gamez Brothers

) and installed it. I know its not correct for a 68 but it looks better than the plain gate IMO. The steering wheel was something I toyed with useing but it was just to small. I'll keep my stocker, it has really grown on me

Name: Picture 208.jpg
Views: 1707
Size: 78.8 KB

Name: Picture 206.jpg
Views: 1699
Size: 22.9 KB

Name: Picture 209.jpg
Views: 1700
Size: 39.3 KB

Name: Picture 210.jpg
Views: 1696
Size: 68.2 KB

shawno72 · 01-07-2013, 12:17 AM

Here are some pics of me and Mark G at the A&W year end car show. Definately the biggest in Lodi
Name: Picture 211.jpg
Views: 1694
Size: 36.2 KB

Name: Picture 212.jpg
Views: 1695
Size: 45.8 KB

Name: Picture 213.jpg
Views: 1695
Size: 59.0 KB

Name: Picture 214.jpg
Views: 1690
Size: 39.0 KB

Name: Picture 216.jpg
Views: 1693
Size: 46.7 KB

shawno72 · 01-07-2013, 12:20 AM

Since the truck will eventually be repainted I decided to play with the patina. Funny story, I always get people who tell me they love the patina on my truck. I say thank you then wonder why nobody can tell the difference between patina and an old paint job that's peeling

Anyways I rubbed it down a little and there you go.
Name: Picture 217.jpg
Views: 1683
Size: 32.1 KB

Name: Picture 218.jpg
Views: 1686
Size: 40.2 KB

Name: Picture 219.jpg
Views: 1680
Size: 29.9 KB

Name: Picture 220.jpg
Views: 1698
Size: 34.0 KB

Name: Picture 221.jpg
Views: 1697
Size: 33.9 KB

shawno72 · 01-07-2013, 12:21 AM

more

Name: Picture 222.jpg
Views: 1683
Size: 34.8 KB

Name: Picture 223.jpg
Views: 1684
Size: 23.6 KB

Name: Picture 224.jpg
Views: 1679
Size: 28.5 KB

Name: Picture 225.jpg
Views: 1668
Size: 35.9 KB

Name: Picture 226.jpg
Views: 1683
Size: 27.1 KB

shawno72 · 01-07-2013, 12:23 AM

Couple more. I bought a sway bar from a guy a while back for $10 and my friend Kieth (thats how he spells it) gave me the sway bar mounting kit so I finally installed it. Hands down one of the best upgrades you can do.
Name: Picture 227.jpg
Views: 1683
Size: 32.1 KB

Name: Picture 227.jpg
Views: 1683
Size: 32.1 KB

Name: Picture 228.jpg
Views: 1680
Size: 34.8 KB

Name: Picture 229.jpg
Views: 1684
Size: 37.7 KB

shawno72 · 01-07-2013, 12:25 AM

Ok here is a dissapointment. I wanted the rear a little lower so I sell the CPP
5" rear drop springs and get a set of ECE 6" drop springs. Can you see a difference?!?!
Name: Picture 231.jpg
Views: 1679
Size: 40.6 KB

Name: Picture 231.jpg
Views: 1679
Size: 40.6 KB

Name: Picture 235.jpg
Views: 1682
Size: 46.6 KB

Name: Picture 230.jpg
Views: 1677
Size: 25.6 KB

Name: Picture 236.jpg
Views: 1673
Size: 29.7 KB

shawno72 · 01-07-2013, 12:27 AM

Here are some inspirational pics of the rear end with no springs. Gotta get this thing on bags soon.
Name: Picture 232.jpg
Views: 1784
Size: 28.2 KB

Name: Picture 233.jpg
Views: 1787
Size: 27.3 KB

Name: Picture 234.jpg
Views: 1793
Size: 30.7 KB

shawno72 · 01-07-2013, 12:29 AM

Was tired of the exhaust exiting in front of the rear wheels and since I work at a muffler shop exhaust can be changed just for fun. I ran it on the outside of the frame rails cause of the tight clearances between the rails. I like it but now there is a little drone around 1500 rpms. Oh well I think it looks better.
Name: Picture 237.jpg
Views: 1678
Size: 49.4 KB

Name: Picture 237.jpg
Views: 1678
Size: 49.4 KB

Name: Picture 238.jpg
Views: 1676
Size: 68.8 KB

Name: Picture 239.jpg
Views: 1673
Size: 31.7 KB

Name: Picture 240.jpg
Views: 1666
Size: 28.6 KB

Name: Picture 241.jpg
Views: 1681
Size: 28.2 KB

shawno72 · 01-07-2013, 12:30 AM

More exhaust pics.
Name: Picture 242.jpg
Views: 1673
Size: 70.7 KB

Name: Picture 243.jpg
Views: 1683
Size: 54.8 KB

Name: Picture 244.jpg
Views: 1677
Size: 65.2 KB

Name: Picture 245.jpg
Views: 1675
Size: 62.3 KB

Name: Picture 246.jpg
Views: 1671
Size: 39.3 KB

C10_ustacould · 01-07-2013, 12:31 AM

Quote:

Originally Posted by shawno72

Here are some inspirational pics of the rear end with no springs. Gotta get this thing on bags soon.
Attachment 1037218

Attachment 1037219

Attachment 1037220

Great update! I enjoyed it so far, looking forward to more. If you want to bag it eventually you should buy two bags for the rear and just shrader valve them for now. Just an idea...

shawno72 · 01-07-2013, 12:33 AM

Well the only thing that wasn't black on my interior was the saddle door panels. I wasn't ready to buy some panels yet cause I think I want to go with actual 68 door panels. These panels were given to me by good ole buddy Steve, man he has really blessed me with some parts. Anyways I got a can of Dupli-color and let it fly painting the panels and arm rests. Looks ok for now.
Name: Picture 247.jpg
Views: 1673
Size: 65.0 KB

Name: Picture 247.jpg
Views: 1673
Size: 65.0 KB

Name: Picture 248.jpg
Views: 1671
Size: 47.5 KB

Name: Picture 249.jpg
Views: 1667
Size: 36.6 KB

Name: Picture 250.jpg
Views: 1669
Size: 62.6 KB

Name: Picture 251.jpg
Views: 1671
Size: 63.3 KB

shawno72 · 01-07-2013, 12:37 AM

Ok on Saturday I come into work and my truck is pulling hard to the right so I put it on the alignment rack and take a closer look. Well what I find is a huge bubble in the left front tire, ok time for some tires. I decided a while back to go back to the steelies so here ya go. I'll still need new rear tires but they will work til after the Turlock Swapmeet at the end of the month.
Name: Picture 252.jpg
Views: 1669
Size: 47.4 KB

Name: Picture 252.jpg
Views: 1669
Size: 47.4 KB

Name: Picture 253.jpg
Views: 1667
Size: 37.7 KB

Name: Picture 254.jpg
Views: 1674
Size: 44.2 KB

Name: Picture 255.jpg
Views: 1666
Size: 43.5 KB

Name: Picture 256.jpg
Views: 1673
Size: 45.6 KB

shawno72 · 01-07-2013, 12:43 AM

Quote:

Originally Posted by HotRod C/10

subscribing!

Its gonna be fun.

Quote:

Originally Posted by sduckworth13

Your seats looks awesome

Thank you!!

Quote:

Originally Posted by DesertCat

Shawno! Finally a build thread! I'm in

I know I'm a little slow

Quote:

Originally Posted by ryanroo

Watching.

Thanks.

Quote:

Originally Posted by 67anthony

Keep up the good work

Thanks Anthony, I'm trying.

Quote:

Originally Posted by trac209

Very nice build.
Posted via Mobile Device

I appreciate that.

Quote:

Originally Posted by hydrojunkie

looks like your going to have a cool cruiser.

She definately gets me around

Quote:

Originally Posted by Rusbuilt

I'm in on this!!

Thanks Rus!

Quote:

Originally Posted by Justin36

Looks great Shawno!
Posted via Mobile Device

I still want your patina

Quote:

Originally Posted by hydrojunkie

nice engine bro. looks awesome

It took some work but I am happy with the results, Thank you.

Quote:

Originally Posted by Bennett--G4L

Subscribed, glad you decided to do a build thread
Posted via Mobile Device

Me too, thanks Keith.

Quote:

Originally Posted by BucksSS

Great update! I enjoyed it so far, looking forward to more. If you want to bag it eventually you should buy two bags for the rear and just shrader valve them for now. Just an idea...

I am actually looking at the Porter stage one rear kit so stay tuned.

BMERDOC · 01-07-2013, 12:58 AM

On board!

01-06-2013, 11:50 PM	#51
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Next thing was to install a factory tach for my V8. At the same time I installed an air pressure gauge for the future bag install. Thanks go to Paul (PT'S 70 CST) for helping me come up with a way to manufacture an air line fitting for the back of the air gauge. I used all NOS gauges except for the tach. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-06-2013, 11:51 PM	#52
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread I also installed a great working AM/FM factory radio that I got from a board member. Got a new speaker for dash and she sounds good considering the ancient technology. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-06-2013, 11:54 PM	#53
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Here is a little C/10 Club get together at the A&W, recognize the board memebers? And no we weren't the only ones there, just the first there and last to leave. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-06-2013, 11:56 PM	#54
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread More and here is my truck being used as a truck. Thats whats nice about patina, you don't care about the paint __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-06-2013, 11:59 PM	#55
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Time to deal with the rear end. I got a good used 3.07 posi rear end from Devin (DSIGH) and it was time to loose the old 3.73's. At the same time I went ahead and notched the rear with a CPP notch. Thanks go to Lodi Transmission for helping me to set the back lash of the rear gears. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:00 AM	#56
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Notch pics. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:01 AM	#57
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Shawno72's long overdue 68 daily driver build thread Subscribed, glad you decided to do a build thread Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

01-07-2013, 12:03 AM	#58
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Next I bought a van tilt from the Stockton swap meet. I then had Kevin (KevsClassics) totally restore it. Let me tell you Kevin does awesome work and takes care of his customers, anyone who needs help with their tilt need to contact Kevin. Kevin even installed it for me and pushed the column further in to give more cab room. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:08 AM	#59
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Back in October you may have heard, or should of heard of, the world famous 7th Annual C/10 Club Get Toghether at Rene's (C/10 king) house. What a blast and I can not wait for the next one. Anyways here are some pics of the caravan that I help put together. Many board members and a few of my friends were in for the hour plus drive to Rene's house. We stopped at a couple places to pick up more people along the way. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:10 AM	#60
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread More __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:11 AM	#61
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread more __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:15 AM	#62
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread One more of Rene's. I bought a plain aftermarket tailgate of CL for $80 and while I don't like the plain style I couldn't pass up the price for a new gate. I got a great used tailgate band from David (one of the flying Gamez Brothers ) and installed it. I know its not correct for a 68 but it looks better than the plain gate IMO. The steering wheel was something I toyed with useing but it was just to small. I'll keep my stocker, it has really grown on me __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:17 AM	#63
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Here are some pics of me and Mark G at the A&W year end car show. Definately the biggest in Lodi __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:20 AM	#64
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Since the truck will eventually be repainted I decided to play with the patina. Funny story, I always get people who tell me they love the patina on my truck. I say thank you then wonder why nobody can tell the difference between patina and an old paint job that's peeling Anyways I rubbed it down a little and there you go. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:21 AM	#65
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread more __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"



Register or Log In To remove these advertisements.

01-07-2013, 12:23 AM	#66
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Couple more. I bought a sway bar from a guy a while back for $10 and my friend Kieth (thats how he spells it) gave me the sway bar mounting kit so I finally installed it. Hands down one of the best upgrades you can do. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:25 AM	#67
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Ok here is a dissapointment. I wanted the rear a little lower so I sell the CPP 5" rear drop springs and get a set of ECE 6" drop springs. Can you see a difference?!?! __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:27 AM	#68
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Here are some inspirational pics of the rear end with no springs. Gotta get this thing on bags soon. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:29 AM	#69
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Was tired of the exhaust exiting in front of the rear wheels and since I work at a muffler shop exhaust can be changed just for fun. I ran it on the outside of the frame rails cause of the tight clearances between the rails. I like it but now there is a little drone around 1500 rpms. Oh well I think it looks better. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:30 AM	#70
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread More exhaust pics. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:33 AM	#72
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Well the only thing that wasn't black on my interior was the saddle door panels. I wasn't ready to buy some panels yet cause I think I want to go with actual 68 door panels. These panels were given to me by good ole buddy Steve, man he has really blessed me with some parts. Anyways I got a can of Dupli-color and let it fly painting the panels and arm rests. Looks ok for now. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:37 AM	#73
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Shawno72's long overdue 68 daily driver build thread Ok on Saturday I come into work and my truck is pulling hard to the right so I put it on the alignment rack and take a closer look. Well what I find is a huge bubble in the left front tire, ok time for some tires. I decided a while back to go back to the steelies so here ya go. I'll still need new rear tires but they will work til after the Turlock Swapmeet at the end of the month. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

01-07-2013, 12:58 AM	#75
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,935	Re: Shawno72's long overdue 68 daily driver build thread On board! __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

Register or Log In To remove these advertisements.