Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-21-2020, 01:58 PM | #1 |
Senior Member
Join Date: Jul 2014
Location: Indy, IN
Posts: 633
|
clutch vibration issues
Hey all, I have been fighting vibration engaging my clutch in my c10 for a long time. I have a crate 350, t5 tranny, stock flywheel and stock clutch kit for the 1993 WC from an s10. Here is what I have done:
Installed two different t5s - not t5 issue Purchased a new flywheel Purchased a new clutch kit Drove for a maybe 2k miles to try to get some wear indications. Ideally the only thing I can think of and that hasn’t been replaced yet is the stock bell housing from the original Saginaw tranny. My other thought is maybe I bent something installing the t5 around my x pipe exhaust. But the wear definitely suggests that I am not having flush clutch engagement. I also have replaced all the small parts in the bell housing and clutch fork along with hemispherical joint rods from lmc. Any help is much appreciated as this is the 3-4th time dropping the tranny. That 700r4 is starting to look really tempting now. Lol Posted via Mobile Device Last edited by 73kay; 11-21-2020 at 02:19 PM. |
Bookmarks |
|
|