I have a lead on a '67 4X4 Long Bed - need opinions on fair price - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dougo · 05-16-2011, 03:00 AM

I've got a lead on a '67 4x4 Long Bed. Small block 350, 4 speed. Looks like there's rust in the rockers, driver's door may have been hit, otherwise - pretty straight exterior. It runs.

She's pretty rough, the guy says it needs TLC. Excluding the wheels it looks all original.

Thinking of making him an offer. Any thoughts to a fair price?

Thanks

**special-K** · 05-16-2011, 06:02 AM

The motor wouldn't be original. Is it a pretty basic truck or one with options? I'll take a stab in the dark and say $2,000.

cdowns · 05-16-2011, 06:59 AM

if people cant set thier own price i'll start at an offer of $100

dougo · 05-16-2011, 11:29 AM

Here's a couple pics. It has the tailgate too...

dougo · 05-16-2011, 11:30 AM

Quote:

Originally Posted by special-K

The motor wouldn't be original. Is it a pretty basic truck or one with options? I'll take a stab in the dark and say $2,000.

Not sure on options... trying to find out more info.

boundstaffpress · 05-16-2011, 11:51 AM

I just sold an all original 283 4x4 with factory front posi and some scattered rust for $2800. I think you should aim between 1000 & 2000 for a modified rough truck of the same vintage.

Rob H. · 05-16-2011, 05:07 PM

I like it! I'd say shoot for around $1500-2000! I'd sure like to find a fairly solid 4x4 like that! I have found a couple of frames for sale lately, just don't have the finances!

*67/72junkie* · 05-16-2011, 06:35 PM

Where you live ,I would say offer $1000 and go slightly higher from there.Where I live and in some other areas of the country it is a $2500 truck any day.There are lots of good trucks in ca at a good price in this economy you just have to look.I located a 72 GMC seirra grande 2500 with bb,tilt, tach and buckets close to you a couple weeks ago for $3500.it is original paint and rust free.It is also no longer for sale and I am going back to CA at the end of the summer.

dougo · 05-16-2011, 07:10 PM

Quote:

Originally Posted by 67/72junkie

Where you live ,I would say offer $1000 and go slightly higher from there.Where I live and in some other areas of the country it is a $2500 truck any day.There are lots of good trucks in ca at a good price in this economy you just have to look.I located a 72 GMC seirra grande 2500 with bb,tilt, tach and buckets close to you a couple weeks ago for $3500.it is original paint and rust free.It is also no longer for sale and I am going back to CA at the end of the summer.

You moving back to california at end of summer? If so, whereabouts?

I'll keep everyone posted, right now - trying to get a hold of the owner so I can look at it.

*dajn* · 05-16-2011, 07:25 PM

I know prices vary from place to place, but I would be happy to get that truck for 1200 being its a four wheel drive. maybe even 2000 is worth it but that would have to be nearing top price.

*67/72junkie* · 05-16-2011, 08:00 PM

No ,I have been going to ca about once a year for the last four to get rust free trucks.I can buy a plane ticket and gas back home for a rustfree truck cheaper than I can repair the rusty ones around here.prices are also alot cheaper there because they haven't all rusted to death and there are alot more to choose from.

dougo · 05-16-2011, 10:34 PM

alright... more pics. This is the extent of the rust. Couple other pics too... thoughts?

**leddzepp** · 05-16-2011, 10:54 PM

Personally, I would pass. You can find cabs in junkyards here that are in better shape than that. What is he asking for the truck? It may still be worth it to buy for the frame/drivetrain and just swap out another cab, if the price is low enough.

dougo · 05-16-2011, 11:07 PM

Quote:

Originally Posted by leddzepp

Personally, I would pass. You can find cabs in junkyards here that are in better shape than that. What is he asking for the truck? It may still be worth it to buy for the frame/drivetrain and just swap out another cab, if the price is low enough.

He seems like he really wants to sell it. Basically said "make me an offer". I'm thinking 500-700 if I were to do anything....

**special-K** · 05-17-2011, 06:40 AM

I'd go that cheap. Bare in mind that's a Super Custom 4wd...pretty rare. It's the equivalent to a CST and would have come with bucket seats. It has big potential.

05-16-2011, 03:00 AM	#1
dougo Registered User Join Date: Feb 2010 Location: Southern California Posts: 543	I have a lead on a '67 4X4 Long Bed - need opinions on fair price I've got a lead on a '67 4x4 Long Bed. Small block 350, 4 speed. Looks like there's rust in the rockers, driver's door may have been hit, otherwise - pretty straight exterior. It runs. She's pretty rough, the guy says it needs TLC. Excluding the wheels it looks all original. Thinking of making him an offer. Any thoughts to a fair price? Thanks __________________ Doug '72 GMC K2500 Suburban 4x4

05-16-2011, 06:02 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: I have a lead on a '67 4X4 Long Bed - need opinions on fair price The motor wouldn't be original. Is it a pretty basic truck or one with options? I'll take a stab in the dark and say $2,000. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-16-2011, 06:59 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: I have a lead on a '67 4X4 Long Bed - need opinions on fair price if people cant set thier own price i'll start at an offer of $100 __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

05-16-2011, 11:29 AM	#4
dougo Registered User Join Date: Feb 2010 Location: Southern California Posts: 543	Re: I have a lead on a '67 4X4 Long Bed - need opinions on fair price Here's a couple pics. It has the tailgate too... Attached Images __________________ Doug '72 GMC K2500 Suburban 4x4

05-16-2011, 11:51 AM	#6
boundstaffpress Jamie Hyneman is my twin Join Date: Nov 2005 Location: La Junta, Colorado Posts: 705	Re: I have a lead on a '67 4X4 Long Bed - need opinions on fair price I just sold an all original 283 4x4 with factory front posi and some scattered rust for $2800. I think you should aim between 1000 & 2000 for a modified rough truck of the same vintage. __________________ Justin SOLD 1967 K10 Fleetside, 283, Front and Rear Posi SOLD Color Wiring Diagrams Now in High Resolution V8 and Cab and Cab and Chassis

05-16-2011, 05:07 PM	#7
Rob H. Registered User Join Date: Nov 2008 Location: Petersville KY Posts: 673	Re: I have a lead on a '67 4X4 Long Bed - need opinions on fair price I like it! I'd say shoot for around $1500-2000! I'd sure like to find a fairly solid 4x4 like that! I have found a couple of frames for sale lately, just don't have the finances! __________________ Rob 72 C/10 (under reconstruction)(destruction ? LOL) 48 Willys CJ2A 1952 Super "A" Farmall (Grandfather's)

05-16-2011, 06:35 PM	#8
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: I have a lead on a '67 4X4 Long Bed - need opinions on fair price Where you live ,I would say offer $1000 and go slightly higher from there.Where I live and in some other areas of the country it is a $2500 truck any day.There are lots of good trucks in ca at a good price in this economy you just have to look.I located a 72 GMC seirra grande 2500 with bb,tilt, tach and buckets close to you a couple weeks ago for $3500.it is original paint and rust free.It is also no longer for sale and I am going back to CA at the end of the summer.

05-16-2011, 07:25 PM	#10
dajn Account Suspended Join Date: Feb 2011 Location: Ogilvie Minnesota Posts: 461	Re: I have a lead on a '67 4X4 Long Bed - need opinions on fair price I know prices vary from place to place, but I would be happy to get that truck for 1200 being its a four wheel drive. maybe even 2000 is worth it but that would have to be nearing top price.

05-16-2011, 08:00 PM	#11
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: I have a lead on a '67 4X4 Long Bed - need opinions on fair price No ,I have been going to ca about once a year for the last four to get rust free trucks.I can buy a plane ticket and gas back home for a rustfree truck cheaper than I can repair the rusty ones around here.prices are also alot cheaper there because they haven't all rusted to death and there are alot more to choose from.

05-16-2011, 10:34 PM	#12
dougo Registered User Join Date: Feb 2010 Location: Southern California Posts: 543	<updated w/more pics> lead on a '67 4X4 Long Bed - need opinions on fair price alright... more pics. This is the extent of the rust. Couple other pics too... thoughts? Attached Images __________________ Doug '72 GMC K2500 Suburban 4x4

05-16-2011, 10:54 PM	#13
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,981	Re: I have a lead on a '67 4X4 Long Bed - need opinions on fair price Personally, I would pass. You can find cabs in junkyards here that are in better shape than that. What is he asking for the truck? It may still be worth it to buy for the frame/drivetrain and just swap out another cab, if the price is low enough. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

05-17-2011, 06:40 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: I have a lead on a '67 4X4 Long Bed - need opinions on fair price I'd go that cheap. Bare in mind that's a Super Custom 4wd...pretty rare. It's the equivalent to a CST and would have come with bucket seats. It has big potential. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.