"Hot Rod" SWB 454 FS-WA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PICKMUP** · 07-13-2004, 01:03 AM

SOLD IT FOR: $4,000

72 Chev SWB Fleetside FS $3,900:
New: built 454 (20K/mi), Edelbrock air gap, Holley 780, flamed valve covers, K&N, headers w/3" Flowmasters, HEI & MSD, 4-row rad, front & rear bumpers, CAS stereo/speakers.
Body: average original paint w/some rust at rocker & front support areas. Some dings & bumps & smaller waves in bed floor.
Pictures later...

**PICKMUP** · 07-13-2004, 02:07 PM

Tailgate is in perfect/near NOS condition!
I thought that was better than just an old TTT

**PICKMUP** · 07-13-2004, 03:02 PM

Here they are. New dashpad, bezel, some SS brake lines, etc. This is a dependable daily driver.

dion · 07-13-2004, 04:25 PM

Damn, I'd love to have it.

toddtheodd · 07-13-2004, 06:12 PM

That looks to be a definite sleeper.
Sure wish I had the money.

kolectrkev · 07-13-2004, 06:54 PM

Any interest in trading for a 71 4x4?

**PICKMUP** · 07-13-2004, 07:13 PM

Trades are considered, but I would like something that is nice so I make something for my time & work at this. Profit is the incentive for me---not just fun

. This truck will drive anywhere...I would hope the trade would also drive here for the swap. Projects have to be delivered and are normally too much work.

dion · 07-14-2004, 11:53 AM

trades, thinking to myself "I wonder if my truck would make it up there?" Hmmmm...

Deltaskier · 07-14-2004, 01:11 PM

Can you post some pics of the rusty areas?

**PICKMUP** · 07-14-2004, 01:37 PM

Rusted in gutters under the door weatherstrips and the front cab supports (6" on the bottom outside area). Here's the gutters. It is hard to see because there isn't much missing. Just the bottom of the groove.

**PICKMUP** · 07-14-2004, 09:26 PM

Just for information purposes, to avoid any more low ball offers and save time, I am NOT looking for lower offers...good trades, maybe. I listed it cheap, because I thougnt someone here might like to take advantage of it. I will sell it for $3,900 and at that price there can't be any complaints if it is a little rough, as described at the top. The engine w/goodies is worth $3,000, so the rest of the truck is a "give away"! This rolling truck sold for $2,000 before the engine, trans, headers/exhaust, radiator, wheels and all the little parts and lots of work to get everything worked out. When I just got it in trade the asking price was $5,800.
Sorry if some thought that was my "Starting Price".

Deltaskier · 07-15-2004, 11:01 AM

Quote:

Originally Posted by PICKMUP

I am NOT looking for lower offers...good trades, maybe. I listed it cheap, because I thougnt someone here might like to take advantage of it. I will sell it for $3,900 and at that price there can't be any complaints if it is a little rough, as described at the top. The engine w/goodies is worth $3,000, so the rest of the truck is a "give away"! This rolling truck sold for $2,000 before the engine, trans, headers/exhaust, radiator, wheels and all the little parts and lots of work to get everything worked out. When I just got it in trade the asking price was $5,800.
Sorry if you thought that was my "Staring Price".

Huh? Did someone delete a post or are you

J/K bump to the top for you.

**PICKMUP** · 07-15-2004, 11:53 AM

Deltaskier, sorry if you thought that last post was for you. It was just general info to stop the low offers I have been getting by PM.

07-13-2004, 01:03 AM	#1
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	"Hot Rod" SWB 454 FS-WA SOLD IT FOR: $4,000 72 Chev SWB Fleetside FS $3,900: New: built 454 (20K/mi), Edelbrock air gap, Holley 780, flamed valve covers, K&N, headers w/3" Flowmasters, HEI & MSD, 4-row rad, front & rear bumpers, CAS stereo/speakers. Body: average original paint w/some rust at rocker & front support areas. Some dings & bumps & smaller waves in bed floor. Pictures later... __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 08-02-2004 at 11:16 AM.

07-13-2004, 02:07 PM	#2
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	Tailgate +++ Tailgate is in perfect/near NOS condition! I thought that was better than just an old TTT __________________ Email: frankeham@comcast.net Phone: 360-956-7170

07-13-2004, 03:02 PM	#3
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	Pics Here they are. New dashpad, bezel, some SS brake lines, etc. This is a dependable daily driver. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

07-13-2004, 04:25 PM	#4
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Damn, I'd love to have it. __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

07-13-2004, 07:13 PM	#7
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	Trades??? Trades are considered, but I would like something that is nice so I make something for my time & work at this. Profit is the incentive for me---not just fun . This truck will drive anywhere...I would hope the trade would also drive here for the swap. Projects have to be delivered and are normally too much work. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

07-13-2004, 06:12 PM	#5
toddtheodd The oddest Todd around Join Date: May 2004 Location: Miami, Florida Posts: 1,418	That looks to be a definite sleeper. Sure wish I had the money.

07-13-2004, 06:54 PM	#6
kolectrkev Registered User Join Date: Jul 2003 Location: Northern Ca. Posts: 69	Any interest in trading for a 71 4x4?

07-14-2004, 11:53 AM	#8
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	trades, thinking to myself "I wonder if my truck would make it up there?" Hmmmm... __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

07-14-2004, 01:11 PM	#9
Deltaskier Registered User Join Date: Jan 2004 Location: Montgomery, TX Posts: 73	Can you post some pics of the rusty areas?

07-14-2004, 01:37 PM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	Rusted in gutters under the door weatherstrips and the front cab supports (6" on the bottom outside area). Here's the gutters. It is hard to see because there isn't much missing. Just the bottom of the groove. Attached Images __________________ Email: frankeham@comcast.net Phone: 360-956-7170

07-14-2004, 09:26 PM	#11
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	FIRM but CHEAP Just for information purposes, to avoid any more low ball offers and save time, I am NOT looking for lower offers...good trades, maybe. I listed it cheap, because I thougnt someone here might like to take advantage of it. I will sell it for $3,900 and at that price there can't be any complaints if it is a little rough, as described at the top. The engine w/goodies is worth $3,000, so the rest of the truck is a "give away"! This rolling truck sold for $2,000 before the engine, trans, headers/exhaust, radiator, wheels and all the little parts and lots of work to get everything worked out. When I just got it in trade the asking price was $5,800. Sorry if some thought that was my "Starting Price". __________________ Email: frankeham@comcast.net Phone: 360-956-7170 Last edited by PICKMUP; 07-15-2004 at 11:45 AM.

07-15-2004, 11:53 AM	#13
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,121	Deltaskier, sorry if you thought that last post was for you. It was just general info to stop the low offers I have been getting by PM. __________________ Email: frankeham@comcast.net Phone: 360-956-7170



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.