The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > Info Center > FAQ Truck Tech > 60-66

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-01-2015, 02:43 PM   #1
Shadow64
Registered User
 
Join Date: Feb 2015
Location: Lyons wi
Posts: 1
1964 brake question

Here is my story I have a truck that I was working on and stopped for a couple years and when I came back to it the brake pedal was locked up tight. So I replaced the booster.
Now I have the issue that I can't build good pedal pressure, it won't even come back up all the way.
All four drums have movement and seem to be applying enuf force but some of the bleeder valves aren't getting as much fluid as the others. I have been trying to bleed them for a while it doesn't seem like there is any air in any of the lines, and I don't feel like I am getting any were.

The new booster came with a vacuumed hose to connect. The old one didn't have one and the brakes worked just fine before I parked it.
Would I need to connect that line up and have the engine running for the lines to be bleed properly? Or is anything else beside bleeding the brakes that would help with havering more pedal pressure?
Shadow64 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com