What did you do to your truck today.The 3rd chapter - Page 113 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**maverickmk** · 04-03-2022, 08:43 AM

Quote:

Originally Posted by cab4word67

Been working on my ne console for a couple weeks now, from cardboard to sawdust and this today. It will be black with the Ironwood stained like the box when Im done.

Very cool, nice work.

72c20customcamper · 04-03-2022, 11:47 AM

Quote:

Originally Posted by cab4word67

Been working on my ne console for a couple weeks now, from cardboard to sawdust and this today. It will be black with the Ironwood stained like the box when I'm done

Very nice work

**Steeveedee** · 04-03-2022, 11:49 AM

Nice! I also like what you did with the dash and glove box door.

cab4word67 · 04-03-2022, 12:42 PM

Quote:

Originally Posted by Steeveedee

Nice! I also like what you did with the dash and glove box door.

Thanks some say thats out dated. Did you notice the heater control?

**Steeveedee** · 04-03-2022, 02:11 PM

Not at first. Nice to carry the theme across the whole dash!

cab4word67 · 04-03-2022, 11:34 PM

yes a little bitt of Purple goes a long ways

**Sheepdip** · 04-04-2022, 12:34 AM

Quote:

Originally Posted by 68bowtie

I finally got it home!!

Attachment 2180394

What are your plans?

KQQL IT · 04-08-2022, 07:14 PM

Hei mis firing like a wet or cracked cap.

Nah just a broken ground wire.
Sure glad I spent the money for 10 cent connection

**Steeveedee** · 04-08-2022, 07:52 PM

Keep a spare module in the glove box. When that ground wire is missing/detached, the module is "walking wounded" and may fail at any time, even after completing that circuit.

KQQL IT · 04-08-2022, 08:29 PM

Quote:

Originally Posted by Steeveedee

Keep a spare module in the glove box. When that ground wire is missing/detached, the module is "walking wounded" and may fail at any time, even after completing that circuit.

I'll bet.
I replaced the gm module with the msd digital style.
I left the gm one and wiring in the glove box though.

cab4word67 · 04-10-2022, 01:31 AM

Update on the new console I'm building. It has been bolted down for the first time and the door is on and working, the lower has been test fitted, still need to cut in the cup holders and wire up the switches. have decided to add floor lights on the sides too. When completed it will be black with stained wood to match the box.

cab4word67 · 04-20-2022, 12:16 PM

Almost done

cab4word67 · 04-21-2022, 08:51 PM

Done stamp on this one, even got the fuzzy stuff inside . Had my nephew 3D out some custom sized cup holders and the trim ring for the shifter.

**maverickmk** · 04-21-2022, 09:41 PM

Quote:

Originally Posted by cab4word67

Done stamp on this one, even got the fuzzy stuff inside . Had my nephew 3D out some custom sized cup holders and the trim ring for the shifter.

Wow, that looks fantastic! Nice work.

cab4word67 · 04-21-2022, 11:48 PM

My idea here was to bring in the look of the box to the cab. switches are for the electric dumps and the passenger door release to let someone in. The deep part of the console is for tools, guns, booze

72c20customcamper · 04-22-2022, 07:27 PM

Looks great .

72c20customcamper · 04-22-2022, 07:33 PM

I sorted out the 68 Golden . PO really screwed it up Points we’re from god knows where and not for the truck . I replaced them roughed in the gap sounded much better . Timing was 4 degreees or so after TDC corrected that got the dwell meter out set the points to 30 degrees and the idle to 750 . Runs great smoothed right out . Now to get the gas tank sorted out can’t run it on a gallon can under the hood to far .

**Already Gone** · 04-22-2022, 07:50 PM

A friend came to help and we got my Truxedo Lo Pro Tonneau cover on the truck. Does anyone know here you can buy plugs or anything that can go into the stake pockets and seal them.

HYPR · 04-22-2022, 09:12 PM

Today I bought a L83/6L80E combo with under 50K on them. As soon as they arrive I will be yanking out that 402 BB and the TH400 with the Doug Nash OD to make room for this combo. I have already installed a 30 Gallon Tanks Inc fuel tank between the bed rails in back and fabricated this fuel filler in the corner of the bed. So let the party begin!

**allchevy58** · 04-22-2022, 11:34 PM

Finished 2 1/2" lift kit last night.

**CS1972** · 04-23-2022, 12:05 AM

I'm curious, what is the height to the top of the cab now? In other words, does in fit through a standard garage door now?

Nice looking!

72c20customcamper · 04-23-2022, 07:45 AM

Quote:

Originally Posted by cab4word67

Update on the new console I'm building. It has been bolted down for the first time and the door is on and working, the lower has been test fitted, still need to cut in the cup holders and wire up the switches. have decided to add floor lights on the sides too. When completed it will be black with stained wood to match the box.

I used the cheap led license plate lamps at Walmart for floor lights when I made the center console.

KQQL IT · 04-23-2022, 07:48 PM

Swap meet score
Pair of stainless wind wings to replace my rusty ones.

67C10Step · 04-23-2022, 09:28 PM

Finally got everything together to make some brackets to properly mount the early 90’s seat in my 67. The PO had put the seat in and I do like it better than the original but they had just drilled holes in the floor to mount. I don’t think that is the safe or proper way to do it.
Bent the brackets to match the 67 floor profile and drilled holes for proper bolting. Then used grade 8 studs and threaded/welded them in the bracket. Once the seat was in I just had to put the 3 point seat belts in.

**allchevy58** · 04-23-2022, 10:43 PM

Quote:

Originally Posted by CS1972

I'm curious, what is the height to the top of the cab now? In other words, does in fit through a standard garage door now?

Nice looking!

Yes, it fits in standard door no problem. The antenna hits, need to trim 6" off, have solid antenna and I don't want bend the cowl.

04-03-2022, 11:49 AM	#2803
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,102	Re: What did you do to your truck today.The 3rd chapter Nice! I also like what you did with the dash and glove box door. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

04-03-2022, 02:11 PM	#2805
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,102	Re: What did you do to your truck today.The 3rd chapter Not at first. Nice to carry the theme across the whole dash! __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

04-03-2022, 11:34 PM	#2806
cab4word67 Registered User Join Date: Sep 2020 Location: portland oregon Posts: 183	Re: What did you do to your truck today.The 3rd chapter yes a little bitt of Purple goes a long ways

04-08-2022, 07:14 PM	#2808
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,130	Re: What did you do to your truck today.The 3rd chapter Hei mis firing like a wet or cracked cap. Nah just a broken ground wire. Sure glad I spent the money for 10 cent connection Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

04-08-2022, 07:52 PM	#2809
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,102	Re: What did you do to your truck today.The 3rd chapter Keep a spare module in the glove box. When that ground wire is missing/detached, the module is "walking wounded" and may fail at any time, even after completing that circuit. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

04-10-2022, 01:31 AM	#2811
cab4word67 Registered User Join Date: Sep 2020 Location: portland oregon Posts: 183	Re: What did you do to your truck today.The 3rd chapter Update on the new console I'm building. It has been bolted down for the first time and the door is on and working, the lower has been test fitted, still need to cut in the cup holders and wire up the switches. have decided to add floor lights on the sides too. When completed it will be black with stained wood to match the box.

04-20-2022, 12:16 PM	#2812
cab4word67 Registered User Join Date: Sep 2020 Location: portland oregon Posts: 183	Re: What did you do to your truck today.The 3rd chapter Almost done

04-21-2022, 08:51 PM	#2813
cab4word67 Registered User Join Date: Sep 2020 Location: portland oregon Posts: 183	Re: What did you do to your truck today.The 3rd chapter Done stamp on this one, even got the fuzzy stuff inside . Had my nephew 3D out some custom sized cup holders and the trim ring for the shifter.

04-21-2022, 11:48 PM	#2815
cab4word67 Registered User Join Date: Sep 2020 Location: portland oregon Posts: 183	Re: What did you do to your truck today.The 3rd chapter My idea here was to bring in the look of the box to the cab. switches are for the electric dumps and the passenger door release to let someone in. The deep part of the console is for tools, guns, booze Last edited by cab4word67; 04-21-2022 at 11:53 PM.

04-22-2022, 07:27 PM	#2816
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,153	Re: What did you do to your truck today.The 3rd chapter Looks great . __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

04-22-2022, 07:33 PM	#2817
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,153	Re: What did you do to your truck today.The 3rd chapter I sorted out the 68 Golden . PO really screwed it up Points we’re from god knows where and not for the truck . I replaced them roughed in the gap sounded much better . Timing was 4 degreees or so after TDC corrected that got the dwell meter out set the points to 30 degrees and the idle to 750 . Runs great smoothed right out . Now to get the gas tank sorted out can’t run it on a gallon can under the hood to far . __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

04-22-2022, 07:50 PM	#2818
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,068	Re: What did you do to your truck today.The 3rd chapter A friend came to help and we got my Truxedo Lo Pro Tonneau cover on the truck. Does anyone know here you can buy plugs or anything that can go into the stake pockets and seal them. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

04-22-2022, 09:12 PM	#2819
HYPR Registered User Join Date: Feb 2019 Location: Valencia Posts: 40	Re: What did you do to your truck today.The 3rd chapter Today I bought a L83/6L80E combo with under 50K on them. As soon as they arrive I will be yanking out that 402 BB and the TH400 with the Doug Nash OD to make room for this combo. I have already installed a 30 Gallon Tanks Inc fuel tank between the bed rails in back and fabricated this fuel filler in the corner of the bed. So let the party begin! Attached Images __________________ To be born a Redneck is by chance to live your life as a Redneck is a lifestyle. Lifelong Gearhead, if it's fast make it Faster!

04-22-2022, 11:34 PM	#2820
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,424	Re: What did you do to your truck today.The 3rd chapter Finished 2 1/2" lift kit last night. Attached Images __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1964 C-30 383/4 speed, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

04-23-2022, 12:05 AM	#2821
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: What did you do to your truck today.The 3rd chapter I'm curious, what is the height to the top of the cab now? In other words, does in fit through a standard garage door now? Nice looking! __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White



Register or Log In To remove these advertisements.

04-23-2022, 07:48 PM	#2823
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,130	Re: What did you do to your truck today.The 3rd chapter Swap meet score Pair of stainless wind wings to replace my rusty ones. Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

04-23-2022, 09:28 PM	#2824
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,407	Re: What did you do to your truck today.The 3rd chapter Finally got everything together to make some brackets to properly mount the early 90’s seat in my 67. The PO had put the seat in and I do like it better than the original but they had just drilled holes in the floor to mount. I don’t think that is the safe or proper way to do it. Bent the brackets to match the 67 floor profile and drilled holes for proper bolting. Then used grade 8 studs and threaded/welded them in the bracket. Once the seat was in I just had to put the 3 point seat belts in. Attached Images __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2020 Toyota CH-R 2020 Acura MDX

Register or Log In To remove these advertisements.