Parting out, 71 burb. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 04-29-2007, 03:50 PM

A few more pics. I am just about done with this one.
Down south, one gaurd is pretty nice, the other has some issues. I think something hit it at one time and that is why the chrome is flaking. Should still be useable with new bolts. $45 shipped.
Brake booster with prop valve and brackets. Working condition unknown. It is a little heavier than i thought, $75 shipped. Kirklin asked about this...
Gas pedal assy. Cable type, v-8. $30 shipped
Hi and low horns. Wire was cut at the harness. $30 shipped

**too much stuff** · 04-29-2007, 03:57 PM

Rear end from 71, 5 lug. Looks like it has the posi, with 3:07 gears. This is just by spinning it on jack stands. Figure on needing all the brake parts. There is nothing under the drums. Panhard bar is fine, and the Drive shaft u-bolts are still on it. (no tires with it) Must be picked up. $180. Badpeanut is first, hgsnotes is second.
Here is how the burb sits now... Ask quick if you see something you need. It will be gone in a few hours.

71MUTT · 04-29-2007, 05:13 PM

I need a wiper switch and knob. I bought two new ones already, they were both junk.
Thanks

DieselEater · 04-29-2007, 06:05 PM

I'll call UPS and investigate 1st thing in the morning.........Thanks.

71MUTT · 04-29-2007, 08:24 PM

How about the driver side vent window assembly, custom/10 deluxe emblems and the wiper switch. (I see someone already wanted the knob)

**too much stuff** · 04-29-2007, 08:43 PM

THE BURB IS GONE!!!
Diesel, keep in mind we don't have a ups store or greyhound close by.
71mutt, drivers side vent was broke. I saved one custom/10 and one deluxe emblem. I also pulled the wiper switch, and i have an extra knob. I should have extras of both emblems if you need pairs. If you want the switch, knob, 2 custom/10 and 2 deluxe emblems, how about $30 shipped.

**too much stuff** · 04-29-2007, 10:31 PM

I also saved some of the clamshell door hardware. If there is any interest, i will get a pic up tomorrow.
Trades may be considered on any of these parts.

badpeanut · 04-30-2007, 08:41 AM

Quote:

Originally Posted by too much stuff

Rear end from 71, 5 lug. Looks like it has the posi, with 3:07 gears. This is just by spinning it on jack stands. Figure on needing all the brake parts. There is nothing under the drums. Panhard bar is fine, and the Drive shaft u-bolts are still on it. (no tires with it) Must be picked up. $180. Badpeanut is first, hgsnotes is second.

Could you take off the cover to check the condition of things inside (no rust on the gears, nothing obviously broken)?

N2GMTrux · 04-30-2007, 08:45 AM

are those front bumper gaurds salvageable and still for sale?

If Down South Truckin, doesnt want those bumper guards, Ill buy them!!!!
P.M me with shipping cost to (Ft. Worth TX 76133)

71MUTT · 04-30-2007, 09:08 AM

Quote:

Originally Posted by too much stuff

THE BURB IS GONE!!!
If you want the switch, knob, 2 custom/10 and 2 deluxe emblems, how about $30 shipped.

Sounds good. I need payment info.
Thanks

**too much stuff** · 04-30-2007, 09:52 AM

Badpeanut, i can check it out for you.
N2gmtrux, one gaurd has some issues like it was hit. I think if you reattach the pad, most people wouldn't notice other than some missing chrome. We will give down south a little more time to decide.
71 mutt, sending pm.

Down south truckin · 04-30-2007, 07:57 PM

I'll pass on the gaurds thanks anyway Mike

72 GMC · 04-30-2007, 08:34 PM

Got any a/c parts? Rear a/c housing?

**too much stuff** · 04-30-2007, 11:07 PM

72gmc, all the a/c was missing when i got it...
n2gmtrux, The front gaurds are yours if you want them.

DieselEater · 04-30-2007, 11:46 PM

Sorry, WAY TOO MUCH TO SHIP.

Thanks anyway,

A......

N2GMTrux · 05-01-2007, 08:05 AM

Quote:

Originally Posted by too much stuff

72gmc, all the a/c was missing when i got it...
n2gmtrux, The front gaurds are yours if you want them.

Do you think its repairable damage to the bumperguard,,, which a chrome shop could repair. And is all parts included other than bolts which were cut off. Can I see a picture of the damaged bumperguard.

**too much stuff** · 05-01-2007, 08:01 PM

N2, the damaged one is the closest in the pic. If you look close you can see where the chrome is missing. They are nothing i would put on a show truck. They would dress up your everyday driver. They didn't look too bad when they were on the burb, but i never looked them over close either. Let me know if you want more pics. Eric

**too much stuff** · 05-01-2007, 11:00 PM

More pics: Posi unit looks fine from what i can see. No water or anything that i saw.
Bumper gaurd pics for N2. Hope these pics are good enough to see. I think the one gaurd had a light hit. It looks rolled in a little bit. Let me know, Eric

**too much stuff** · 05-02-2007, 07:46 PM

TTT, then off to e-bay. Offers may be considerd. Eric

N2GMTrux · 05-03-2007, 01:58 PM

I'll take the bumperguards,,,,, P.M. me with mailing info will be paying by bank M.O.

woodridge · 05-03-2007, 03:11 PM

If the board transport thing gets going I would like to have the bucket seats if they are still available.

**too much stuff** · 05-03-2007, 08:54 PM

N2, sending pm.
Woodridge, if you can arrange everything, they can sit here for a bit. Let me know if you want to try. Eric

04-29-2007, 03:50 PM	#26
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Parting out, 71 burb. A few more pics. I am just about done with this one. Down south, one gaurd is pretty nice, the other has some issues. I think something hit it at one time and that is why the chrome is flaking. Should still be useable with new bolts. $45 shipped. Brake booster with prop valve and brackets. Working condition unknown. It is a little heavier than i thought, $75 shipped. Kirklin asked about this... Gas pedal assy. Cable type, v-8. $30 shipped Hi and low horns. Wire was cut at the harness. $30 shipped Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-29-2007, 03:57 PM	#27
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Parting out, 71 burb. Rear end from 71, 5 lug. Looks like it has the posi, with 3:07 gears. This is just by spinning it on jack stands. Figure on needing all the brake parts. There is nothing under the drums. Panhard bar is fine, and the Drive shaft u-bolts are still on it. (no tires with it) Must be picked up. $180. Badpeanut is first, hgsnotes is second. Here is how the burb sits now... Ask quick if you see something you need. It will be gone in a few hours. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-29-2007, 05:13 PM	#28
71MUTT Can't ReMember Join Date: Dec 2006 Location: Orlando area Posts: 258	Re: Parting out, 71 burb. I need a wiper switch and knob. I bought two new ones already, they were both junk. Thanks __________________ Adversity doesn't test your character; it reveals it. 71 C-10 LWB 350/TH350. I purchased it in 1978 for $1400. I'm currently abusing it daily. (when it's running )

04-29-2007, 06:05 PM	#29
DieselEater Registered User Join Date: Dec 2006 Location: Trinidad, Colorado Posts: 642	Re: Parting out, 71 burb. I'll call UPS and investigate 1st thing in the morning.........Thanks. __________________ 69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959

04-29-2007, 08:24 PM	#30
71MUTT Can't ReMember Join Date: Dec 2006 Location: Orlando area Posts: 258	Re: Parting out, 71 burb. How about the driver side vent window assembly, custom/10 deluxe emblems and the wiper switch. (I see someone already wanted the knob) __________________ Adversity doesn't test your character; it reveals it. 71 C-10 LWB 350/TH350. I purchased it in 1978 for $1400. I'm currently abusing it daily. (when it's running )

04-29-2007, 08:43 PM	#31
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Parting out, 71 burb. THE BURB IS GONE!!! Diesel, keep in mind we don't have a ups store or greyhound close by. 71mutt, drivers side vent was broke. I saved one custom/10 and one deluxe emblem. I also pulled the wiper switch, and i have an extra knob. I should have extras of both emblems if you need pairs. If you want the switch, knob, 2 custom/10 and 2 deluxe emblems, how about $30 shipped. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-29-2007, 10:31 PM	#32
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Parting out, 71 burb. I also saved some of the clamshell door hardware. If there is any interest, i will get a pic up tomorrow. Trades may be considered on any of these parts. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-30-2007, 08:45 AM	#34
N2GMTrux Registered User Join Date: Jan 2007 Location: Fort Worth, TX 76133 Posts: 406	Re: Parting out, 71 burb. are those front bumper gaurds salvageable and still for sale? If Down South Truckin, doesnt want those bumper guards, Ill buy them!!!! P.M me with shipping cost to (Ft. Worth TX 76133) __________________ ...try'n to be a little! This is a great site. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 http://www.67-72chevytrucks.com/vboa...d.php?t=375640 Last edited by N2GMTrux; 04-30-2007 at 09:14 AM. Reason: forgot shipping info

04-30-2007, 09:52 AM	#36
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Parting out, 71 burb. Badpeanut, i can check it out for you. N2gmtrux, one gaurd has some issues like it was hit. I think if you reattach the pad, most people wouldn't notice other than some missing chrome. We will give down south a little more time to decide. 71 mutt, sending pm. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-30-2007, 07:57 PM	#37
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: Parting out, 71 burb. I'll pass on the gaurds thanks anyway Mike

04-30-2007, 08:34 PM	#38
72 GMC Registered User Join Date: Apr 2007 Location: Miami Posts: 12	Re: Parting out, 71 burb. Got any a/c parts? Rear a/c housing?

04-30-2007, 11:07 PM	#39
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Parting out, 71 burb. 72gmc, all the a/c was missing when i got it... n2gmtrux, The front gaurds are yours if you want them. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-30-2007, 11:46 PM	#40
DieselEater Registered User Join Date: Dec 2006 Location: Trinidad, Colorado Posts: 642	Re: Parting out, 71 burb. Sorry, WAY TOO MUCH TO SHIP. Thanks anyway, A...... __________________ 69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959

05-01-2007, 08:01 PM	#42
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Parting out, 71 burb. N2, the damaged one is the closest in the pic. If you look close you can see where the chrome is missing. They are nothing i would put on a show truck. They would dress up your everyday driver. They didn't look too bad when they were on the burb, but i never looked them over close either. Let me know if you want more pics. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-01-2007, 11:00 PM	#43
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Parting out, 71 burb. More pics: Posi unit looks fine from what i can see. No water or anything that i saw. Bumper gaurd pics for N2. Hope these pics are good enough to see. I think the one gaurd had a light hit. It looks rolled in a little bit. Let me know, Eric Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

05-02-2007, 07:46 PM	#44
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Parting out, 71 burb. TTT, then off to e-bay. Offers may be considerd. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

05-03-2007, 01:58 PM	#45
N2GMTrux Registered User Join Date: Jan 2007 Location: Fort Worth, TX 76133 Posts: 406	Re: Parting out, 71 burb. I'll take the bumperguards,,,,, P.M. me with mailing info will be paying by bank M.O. __________________ ...try'n to be a little! This is a great site. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 http://www.67-72chevytrucks.com/vboa...d.php?t=375640

05-03-2007, 03:11 PM	#46
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: Parting out, 71 burb. If the board transport thing gets going I would like to have the bucket seats if they are still available. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

05-03-2007, 08:54 PM	#47
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,709	Re: Parting out, 71 burb. N2, sending pm. Woodridge, if you can arrange everything, they can sit here for a bit. Let me know if you want to try. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Register or Log In To remove these advertisements.