Need help finding a part - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hemi43 · 07-20-2020, 05:07 PM

In an on going effort to fine tune my Blazer, I'm now wanting to reduce the amount of camber on the front end. Even though the truck drives amazing, I'm starting to see the tires wearing on the outside edge. I measured everything, and I have 1.2 degrees of camber which is too much especially with taller tires.
Moog (part# K936) used to make an adjustable bushing to relocate the upper ball joint, but I just called them and they no longer produce this item.
Does anyone know of another manufacturer that sell these? I could machine my own, but would be much easier if I could just purchase a set.
Reference picture below as to what these look like.
Thanks in advance.

https://images-na.ssl-images-amazon....CLZZZZZZZ_.jpg

07-20-2020, 05:07 PM	#1
hemi43 Registered User Join Date: Mar 2015 Location: Ontario Canada Posts: 1,500	Need help finding a part In an on going effort to fine tune my Blazer, I'm now wanting to reduce the amount of camber on the front end. Even though the truck drives amazing, I'm starting to see the tires wearing on the outside edge. I measured everything, and I have 1.2 degrees of camber which is too much especially with taller tires. Moog (part# K936) used to make an adjustable bushing to relocate the upper ball joint, but I just called them and they no longer produce this item. Does anyone know of another manufacturer that sell these? I could machine my own, but would be much easier if I could just purchase a set. Reference picture below as to what these look like. Thanks in advance. https://images-na.ssl-images-amazon....CLZZZZZZZ_.jpg



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.