The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > Diesel Conversions

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-09-2012, 04:24 PM   #1251
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: Finally starting my Longhorn 4x4 conversion

Quote:
Originally Posted by woodwright View Post
You suck man.
I can set you up with one.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 11-12-2012, 03:13 PM   #1252
rgreathouse
Registered User
 
Join Date: Dec 2004
Location: jackson,ca
Posts: 486
Re: Finally starting my Longhorn 4x4 conversion

This things gonna be bad! its been inspirational for my swb 12v/nv4500 build. Does the intercooler piping clear between the inner fenders and battery box fine? ive been debating running my 2nd gen intercooler flipped upside down and relocating batterys.
__________________
1972 c10,2wd,long bed,250,4spd---->
1972 SWB Fleetside 4x4 12v Cummins build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=513791
rgreathouse is online now   Reply With Quote
Old 11-12-2012, 03:14 PM   #1253
rgreathouse
Registered User
 
Join Date: Dec 2004
Location: jackson,ca
Posts: 486
Re: Finally starting my Longhorn 4x4 conversion

Also does your hood latch clear ok? im having a tough time squeezing the 2nd gen intercooler between frame rails and under hood latch.
__________________
1972 c10,2wd,long bed,250,4spd---->
1972 SWB Fleetside 4x4 12v Cummins build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=513791
rgreathouse is online now   Reply With Quote
Old 11-12-2012, 03:54 PM   #1254
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: Finally starting my Longhorn 4x4 conversion

Quote:
Originally Posted by rgreathouse View Post
This things gonna be bad! its been inspirational for my swb 12v/nv4500 build. Does the intercooler piping clear between the inner fenders and battery box fine? ive been debating running my 2nd gen intercooler flipped upside down and relocating batterys.
The piping clears the battery trays, but I had to trim the inner fender on the driver's side for the intercooler piping to clear.

Quote:
Originally Posted by rgreathouse View Post
Also does your hood latch clear ok? im having a tough time squeezing the 2nd gen intercooler between frame rails and under hood latch.
My hood latch will clear after I modify it. I have to cut it and move it 3/4" of an inch and do the same to the hood guide pin and it will work fine.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 11-12-2012, 04:27 PM   #1255
rgreathouse
Registered User
 
Join Date: Dec 2004
Location: jackson,ca
Posts: 486
Re: Finally starting my Longhorn 4x4 conversion

Thats what I fugured... Im thinking about running the intercooler oposite of yours and mounting the batterys under the bed.

For fitting it ill either run a 1" body or trim an inch off the intercooler... I hadnt really thought about modifying the latch so ill be excited to see that!

Have you ran exhaust yet? Its gonna be interesting to get mine past the tcase.
Posted via Mobile Device
__________________
1972 c10,2wd,long bed,250,4spd---->
1972 SWB Fleetside 4x4 12v Cummins build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=513791
rgreathouse is online now   Reply With Quote
Old 11-12-2012, 04:29 PM   #1256
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: Finally starting my Longhorn 4x4 conversion

Yep, I have 4" over the trans cross member and 5" on back. I got 4" all the way through on the 88 burb I'm doing, so it can be done.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 11-13-2012, 12:02 AM   #1257
rgreathouse
Registered User
 
Join Date: Dec 2004
Location: jackson,ca
Posts: 486
Re: Finally starting my Longhorn 4x4 conversion

We'll hope so! what radiator are you running? Any pics of clutch linkage? and hydra boost linkage?
__________________
1972 c10,2wd,long bed,250,4spd---->
1972 SWB Fleetside 4x4 12v Cummins build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=513791
rgreathouse is online now   Reply With Quote
Old 11-13-2012, 04:19 PM   #1258
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: Finally starting my Longhorn 4x4 conversion

Quote:
Originally Posted by rgreathouse View Post
We'll hope so! what radiator are you running? Any pics of clutch linkage? and hydra boost linkage?
I used a stock BBC radiator for this truck. I can get you a pic of the clutch pedal set up. It was a PITA to figure out and get the rod to travel straight when the pedal moves in an arc. I'll have to remove the linkage for the hydra boost to get a pic of it. When I do I'll get a pic of it.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 11-13-2012, 09:22 PM   #1259
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: Finally starting my Longhorn 4x4 conversion

Real men run big radiators!



just kidding... hahaha

Ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 11-14-2012, 04:36 PM   #1260
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: Finally starting my Longhorn 4x4 conversion

Quote:
Originally Posted by ryanroo View Post
Real men run big radiators!



just kidding... hahaha

Ryan
Will you ever utilize it? Mine stays cool just fine right now. LMAO!
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 11-14-2012, 08:08 PM   #1261
mknittle
Registered User
 
mknittle's Avatar
 
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
Re: Finally starting my Longhorn 4x4 conversion

Quote:
Originally Posted by Dieselwrencher View Post
Will you ever utilize it? Mine stays cool just fine right now. LMAO!
LOL does it have water in it?
__________________
Mark

My GMC build.
http://67-72chevytrucks.com/vboard/s...d.php?t=536602
mknittle is offline   Reply With Quote
Old 11-14-2012, 08:28 PM   #1262
mknittle
Registered User
 
mknittle's Avatar
 
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
Re: Finally starting my Longhorn 4x4 conversion

Lookin Great RYAN!
__________________
Mark

My GMC build.
http://67-72chevytrucks.com/vboard/s...d.php?t=536602
mknittle is offline   Reply With Quote
Old 11-15-2012, 03:07 PM   #1263
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: Finally starting my Longhorn 4x4 conversion

Quote:
Originally Posted by mknittle View Post
LOL does it have water in it?
Actually, it does have coolant in it. I don't think the truck knows it's supposed to be a truck again.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 11-18-2012, 08:11 PM   #1264
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: Finally starting my Longhorn 4x4 conversion

What hydroboost are you using? i have the unit from a 01 dodge and it is all sorts of into the intake. i think i need to find a shorter hydroboost, or continue on with my slight modification of normal to get the unit i have on there.

i need to make sure i the ability to use an MC that has a big enough bore for the big front brakes. i think i can maybe get this one to work if i toss the factory intake horn, but it will still be close to the IP

Thanks
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 11-18-2012, 08:42 PM   #1265
1985-GMC
Chevy Enthusiast
 
1985-GMC's Avatar
 
Join Date: Jul 2009
Location: Canyon Lake Texas
Posts: 2,024
Re: Finally starting my Longhorn 4x4 conversion

Some of the corvette guys mount the hydroboost upside down, that might be an option.
__________________
Tony
1985 GMC K2500 restoration Project: Rust, White & Blue
1989 Chevy R3500 CC Cummins & 4X4 swap some day...
1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)
1985-GMC is offline   Reply With Quote
Old 11-19-2012, 09:46 PM   #1266
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: Finally starting my Longhorn 4x4 conversion

Quote:
Originally Posted by ryanroo View Post
What hydroboost are you using? i have the unit from a 01 dodge and it is all sorts of into the intake. i think i need to find a shorter hydroboost, or continue on with my slight modification of normal to get the unit i have on there.

i need to make sure i the ability to use an MC that has a big enough bore for the big front brakes. i think i can maybe get this one to work if i toss the factory intake horn, but it will still be close to the IP

Thanks
Ryan, my Hydraboost is from a 84 K30. I made a new plate and bolted it directly to the fire wall. You might have issues with as far back as your engine is. If you have to ditch the stock intake just make a flange and weld pipe to it like i did on mine. A stock intake wouldn't fit on mine either. I tried a 24v one, a 12v one may have fit. I also tried a dodge unit on my truck, but the bracket they had on the rear placed the whole mess way forward like you're saying and would have been into my injection pump. If you want a bigger reservoir, get one from a C40 or so. It should bolt on the pick up hydraboost unit.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 11-19-2012, 09:50 PM   #1267
1985-GMC
Chevy Enthusiast
 
1985-GMC's Avatar
 
Join Date: Jul 2009
Location: Canyon Lake Texas
Posts: 2,024
Re: Finally starting my Longhorn 4x4 conversion

Oh never mind. Its getting into the intake horn, I get it now.
__________________
Tony
1985 GMC K2500 restoration Project: Rust, White & Blue
1989 Chevy R3500 CC Cummins & 4X4 swap some day...
1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)
1985-GMC is offline   Reply With Quote
Old 11-19-2012, 10:22 PM   #1268
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: Finally starting my Longhorn 4x4 conversion

Sweet, i think i have one of those kicking around. ill have to check my hidden parts piles and see if i can make that work.

the engine set back is definitely getting me right now, but i think i can make it all fit

Ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 11-20-2012, 08:09 AM   #1269
RatRod68
Registered User
 
RatRod68's Avatar
 
Join Date: Aug 2007
Location: Kentucky
Posts: 828
Re: Finally starting my Longhorn 4x4 conversion

There is a member on here that sells an adapter plate to run gm hydroboost setup. There is a guy on pirate running the kit on his K5 with a 6.oh in it
__________________
build Threads:
Nasty 68 C10. My lil hotrod
Leftovers 68 C20
D-Ranged Ford Ranger on steroids

Semper Fi
RatRod68 is offline   Reply With Quote
Old 11-20-2012, 08:58 AM   #1270
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: Finally starting my Longhorn 4x4 conversion

adapter plates aren't much of an issue, i can make pretty much anything i need.

i think ill need to follow Ryans path with intake.

Ryan
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 11-20-2012, 12:53 PM   #1271
RatRod68
Registered User
 
RatRod68's Avatar
 
Join Date: Aug 2007
Location: Kentucky
Posts: 828
Re: Finally starting my Longhorn 4x4 conversion

Quote:
Originally Posted by ryanroo View Post
adapter plates aren't much of an issue, i can make pretty much anything i need.

i think ill need to follow Ryans path with intake.

Ryan
I keep forgetting you moved it back so the back of the valve cover acts as your center console.

Check the super dooty ones. I have a super dooty hydroboost setup with a 95 Explorer master cyl. Everything else under the hood of the explorer is stock. If your interested, I can get some measurements
__________________
build Threads:
Nasty 68 C10. My lil hotrod
Leftovers 68 C20
D-Ranged Ford Ranger on steroids

Semper Fi
RatRod68 is offline   Reply With Quote
Old 11-20-2012, 03:44 PM   #1272
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: Finally starting my Longhorn 4x4 conversion

Ryan, for what it's worth, I put a stock corvette master cylinder on a gm truck hydraboost in my corvette so I could run the 4 piston calipers. It works great. Maybe that's an option for you too.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 11-20-2012, 09:00 PM   #1273
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: Finally starting my Longhorn 4x4 conversion

Quote:
Originally Posted by RatRod68 View Post
I keep forgetting you moved it back so the back of the valve cover acts as your center console.

Check the super dooty ones. I have a super dooty hydroboost setup with a 95 Explorer master cyl. Everything else under the hood of the explorer is stock. If your interested, I can get some measurements
I am all about dual purpose. a center console that keep the coffee warm? I'M IN! i would take some measurements if you have time, cant hurt to have some options.

Quote:
Originally Posted by Dieselwrencher View Post
Ryan, for what it's worth, I put a stock corvette master cylinder on a gm truck hydraboost in my corvette so I could run the 4 piston calipers. It works great. Maybe that's an option for you too.
Actually ive heard good things about those, i just totally forgot about it. ill probably have to bug the napa guys for some specs when i figure out WTH i am doing.
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 11-24-2012, 12:57 AM   #1274
lowrollin70gmc
Too many projects
 
lowrollin70gmc's Avatar
 
Join Date: Mar 2004
Location: Fargo, ND land of the flat hills
Posts: 1,147
Re: Finally starting my Longhorn 4x4 conversion

I'm also running a Corvette master on hydroboost with stock D60 discs/11.5AAM discs. Works great and doesn't look too modern under the hood.

There is a split on the Corvette masters with the later ones having a shallow indent for the push rod. I bought one for a 77 Corvette and a 1 1/8 bore and it works great with plenty of reservoir capacity.

Edit: I'm finally building my 68's D60 (after driving my Nova on snow/ice I decided to get my butt in gear) so if you can PM me your address I'll ship the GM D60 arm down to IA.
__________________
Andrew
84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck"
70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc
68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac"
63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car"
53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon”
30 Model A 16 Focus ST
lowrollin70gmc is offline   Reply With Quote
Old 11-24-2012, 01:04 AM   #1275
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,112
Re: Finally starting my Longhorn 4x4 conversion

Thanks Lowrollin.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:38 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com