The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-15-2011, 04:19 PM   #1
Hubscrub
Cruzin
 
Hubscrub's Avatar
 
Join Date: Dec 2009
Location: on the road
Posts: 2,835
700r4 shift linkage

I have a 71 chevy 350, 700r4 trans. with a factory style auto column and i have the lokar cable shifter currently installed but i really don't like it i can't seem to adjust it enough to get more gears i can get P R N OD and sometimes D if i pull enough (the cable is hitting the column). So has anyone tried the shift linkage tha ECE sells or any other hard linkage that works better? My motor is also mounted in the rear holes (like a inline 6 and a 4x4) if that affects the line of travel any. thanks here is a pic of the shift linkage on the ECE website.
Attached Images
 
__________________
Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8

Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U

Proverbs 3:5,6

"Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt

In memory of our first baby daughter, daddy and mommy love you.
Danica Grace 6/26/14

Last edited by Hubscrub; 01-15-2011 at 04:20 PM.
Hubscrub is offline   Reply With Quote
Old 01-15-2011, 05:35 PM   #2
6772owner
Gearhead
 
6772owner's Avatar
 
Join Date: Jan 2008
Location: Colorado
Posts: 1,193
Re: 700r4 shift linkage

I have the Kugel Komponents shift linkage (basically looks exactly like your picture) I dont have any issues with it. I cannot seem to get the lower gears (1,2,3) to line up exactly with the indicator, but it doesnt bother me any.
__________________
2002 Saturn SL2, My D/D
2019 Ford Fusion SE, Ecoboost - Wife's D/D
1993 Camaro Z28, A4, CAI, Cat-Back Exhaust

Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD!
Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644
6772owner is offline   Reply With Quote
Old 01-15-2011, 05:37 PM   #3
Hubscrub
Cruzin
 
Hubscrub's Avatar
 
Join Date: Dec 2009
Location: on the road
Posts: 2,835
Re: 700r4 shift linkage

yea thats the brand name of it, not bad for $45 i think when i paid around $120 for the cable linkage thanks
__________________
Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8

Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U

Proverbs 3:5,6

"Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt

In memory of our first baby daughter, daddy and mommy love you.
Danica Grace 6/26/14

Last edited by Hubscrub; 01-15-2011 at 05:37 PM.
Hubscrub is offline   Reply With Quote
Old 01-15-2011, 09:22 PM   #4
hotrodimpy
Registered User
 
Join Date: May 2010
Location: Knoxville TN
Posts: 120
Re: 700r4 shift linkage

Hubscrub I just read your post. We designed that cable linkage years back. About a year or so we revisited the cable shift linkage kit. We redesigned the lower shift arm that goes on the transmission selector shaft. If you call our tech department and talk to Jeff or Eric they will be able walk you through adjusting the cable so you can get all your gear positions it is just in the adjustment. Hope this helps. 865-966-2269
hotrodimpy is offline   Reply With Quote
Old 01-15-2011, 09:38 PM   #5
leddzepp
Moderator
 
leddzepp's Avatar
 
Join Date: May 2007
Location: Southern Cal
Posts: 19,989
Re: 700r4 shift linkage

I had Kugel Komponents in my other truck with a 350/700 R4 combo. I dialed it in and it was perfect. Great price and great design....far better than a cable in my opinion.
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed.

1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck.


RIP ElJay
RIP 67ChevyRedneck
RIP Grumpy Old Man
leddzepp is offline   Reply With Quote
Old 04-20-2011, 06:31 AM   #6
J-Rod67
Registered User
 
Join Date: Feb 2008
Location: Appling, Ga
Posts: 20
Re: 700r4 shift linkage

Anyone tried the shift linkage kit offered by LMC truck for 700r4 in the 73-87 catalog?
J-Rod67 is offline   Reply With Quote
Old 04-20-2011, 07:09 AM   #7
mac808
Senior Member
 
mac808's Avatar
 
Join Date: Nov 2010
Location: Honolulu Hawaii
Posts: 308
Re: 700r4 shift linkage

hotrod and/or leddzepp, is this simple 'adjustment' done just on the rod itself by loosening the collars on both ends and lengthening/shortening the amount of thread?

My gear indicator on my column doesn't quite line up either. I thought it was because the acrylic lense was for a 3 speed when mine is upgraded to a 4 speed but it still doesn't line up just right.

Any tips you could provide would be great.
mac808 is offline   Reply With Quote
Old 04-20-2011, 09:19 AM   #8
NicoSlam
Registered User
 
Join Date: Nov 2009
Location: San Antonio TX
Posts: 251
Re: 700r4 shift linkage

I have the same setup as you mentioned and I just installed the Kruegl linkage. Perfect and easy to adjust although I had to trim the rod a little (3/8"). Its fun cutting stainless with a hack saw.
NicoSlam is offline   Reply With Quote
Old 04-20-2011, 10:36 AM   #9
tqlspec
Registered User
 
tqlspec's Avatar
 
Join Date: Feb 2008
Location: Jackson, TN
Posts: 99
Re: 700r4 shift linkage

I have the Lokar cable shifter and it works fine in all gears.
__________________
Retired Navy

1972 C10 Cheyenne fleetside
350 sbc, 700r4, 3.42 rear
tqlspec is offline   Reply With Quote
Old 04-20-2011, 12:38 PM   #10
zellway
Registered User
 
zellway's Avatar
 
Join Date: Dec 2009
Location: Arizona City, AZ
Posts: 747
Re: 700r4 shift linkage

I have the CPP kit on my 68. hard to bend the rod a bit to help the joints from binding but it works great.
__________________
-----------------------------------------------------------
Erik
My 69 suburban http://67-72chevytrucks.com/vboard/s...d.php?t=530626
1970 C10 step Project Jiminy http://67-72chevytrucks.com/vboard/s...d.php?t=682647
RUST!? Thats just mother natures way of telling all of us.....MINE!!!!
zellway is offline   Reply With Quote
Old 04-20-2011, 01:37 PM   #11
nobull2
Registered User
 
nobull2's Avatar
 
Join Date: Mar 2011
Location: alpena ar
Posts: 132
Re: 700r4 shift linkage

x 2 Kruegl linkage I used it and works really well
nobull2 is offline   Reply With Quote
Old 04-20-2011, 06:45 PM   #12
1972RedNeck
Registered User
 
1972RedNeck's Avatar
 
Join Date: Jan 2011
Location: Townsend MT
Posts: 1,725
Re: 700r4 shift linkage

I just used the factory turbo 350 linkage on mine.
1972RedNeck is offline   Reply With Quote
Old 04-20-2011, 06:52 PM   #13
leddzepp
Moderator
 
leddzepp's Avatar
 
Join Date: May 2007
Location: Southern Cal
Posts: 19,989
Re: 700r4 shift linkage

Quote:
Originally Posted by mac808 View Post
hotrod and/or leddzepp, is this simple 'adjustment' done just on the rod itself by loosening the collars on both ends and lengthening/shortening the amount of thread?

My gear indicator on my column doesn't quite line up either. I thought it was because the acrylic lense was for a 3 speed when mine is upgraded to a 4 speed but it still doesn't line up just right.

Any tips you could provide would be great.
It has been a while, but I did that, as well as rotated the assembly that attaches to the transmission. You should be able to find a combination between the two to make it work.
__________________
1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed.

1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck.


RIP ElJay
RIP 67ChevyRedneck
RIP Grumpy Old Man
leddzepp is offline   Reply With Quote
Old 04-20-2011, 10:14 PM   #14
jugernot
Life, Be In It.....
 
jugernot's Avatar
 
Join Date: Oct 2003
Location: Novato, California
Posts: 1,498
Re: 700r4 shift linkage

I have the original linkage now, but have thought of using the Lokar cable because it looks like the stock linkage will be in the way of the exhaust coming off the Sanderson Headers I have.
__________________
Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows"

http://67-72chevytrucks.com/vboard/s...d.php?t=200082
jugernot is offline   Reply With Quote
Old 04-21-2011, 08:27 AM   #15
mac808
Senior Member
 
mac808's Avatar
 
Join Date: Nov 2010
Location: Honolulu Hawaii
Posts: 308
Re: 700r4 shift linkage

Quote:
Originally Posted by leddzepp View Post
It has been a while, but I did that, as well as rotated the assembly that attaches to the transmission. You should be able to find a combination between the two to make it work.
Thanks leddzepp! Will try it and see how it goes!
mac808 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com