09-24-2011, 11:31 PM | #1 |
Registered User
Join Date: Jan 2010
Location: Leesburg,Ga.
Posts: 359
|
Copper header gasket?
I know this sounds like a dumb question, but have never used any for my headers. Have a friend that has a new set of sb copper header gaskets that I was going to try. My question is the gaskets have a small lip around each exhaust port that protudes out about a mm or 2. Does the lip go toward the block or the header? Are they even worth messing with? Never had problems with the regular gaskets.
Thanks Coater |
09-25-2011, 03:03 PM | #2 |
Registered Truck Offender
Join Date: May 2008
Location: hells training ground (aka Ariz)
Posts: 3,118
|
Re: Copper header gasket?
The raised bead goes towards the header. If you've never had problems with the standard header gaskets,, I'd suggerst you stick with them. Best I've seen these used was with a good smear of hi-temp silicone on both sides before the header was bolted on.
__________________
Still playin with trucks, even at my age! When you're dead, it's only a problem for the people around you, because you don't know you're dead. .....It's kinda the same when your STUPID. I just did my taxes and reviewed my SS statement. Thanks to the current administration it looks like I will only have to work till noon on the day of my funeral. |
09-25-2011, 11:49 PM | #3 |
Registered User
Join Date: Jan 2010
Location: Leesburg,Ga.
Posts: 359
|
Re: Copper header gasket?
Thank you! I will stick with the regular gaskets.
Thanks again! |
09-26-2011, 08:37 AM | #4 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Copper header gasket?
with headers the soft copper or aluminium works great// have sealed great for my projects over the past 45years and they are reusable too
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
09-27-2011, 02:45 AM | #5 |
Registered User
Join Date: Jun 2006
Location: Maple Valley, WA
Posts: 1,913
|
Re: Copper header gasket?
The best place to use them is your collector the copper does great down there. I agree about them with CD Its all I use now.
|
10-03-2011, 03:31 AM | #6 |
Registered User
Join Date: Dec 2004
Location: grand terrace , caifornia
Posts: 338
|
Re: Copper header gasket?
I use the cheaper Fel Pro gaskets and never had a problem. But i think the copper is reusable unlike the fel pros. And cost more.
|
Bookmarks |
|
|