GA parting out 71 c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**heehawracing** · 04-09-2021, 10:31 AM

parting out cab 1000.00
doors 150.00 each rust in the bottoms
door panels 100.00 shipped
parting out the complete truck will sell the complete cab doors and fenders it runs and drives 7704687776

**pjmoreland** · 04-09-2021, 10:55 AM

I'm interested in the engine harness that goes from the firewall to the distributor and starter if the wires are good.

**72 Super** · 04-09-2021, 12:17 PM

Are the fenders good, any rust?

Thanks,
Ray

**heehawracing** · 04-09-2021, 12:54 PM

Quote:

Originally Posted by pjmoreland

I'm interested in the engine harness that goes from the firewall to the distributor and starter if the wires are good.

its no good

**heehawracing** · 04-09-2021, 12:55 PM

Quote:

Originally Posted by 72 Super

Are the fenders good, any rust?

Thanks,
Ray

normal rust driver side has a dent

rjw · 04-12-2021, 06:13 PM

Interested in drive shaft including center bearing bracket
Condition ?
Long wheelbase?
Price to 13108
Thanks Bob

**heehawracing** · 04-12-2021, 07:09 PM

Quote:

Originally Posted by rjw

Interested in drive shaft including center bearing bracket
Condition ?
Long wheelbase?
Price to 13108
Thanks Bob

there in stock condition the truck ran and drove but not sure if in will need u joints and midshaft bearing 200.00 shipped

**maverickmk** · 04-14-2021, 07:57 AM

What motor does it have? If a V8, how much?

**heehawracing** · 04-14-2021, 08:15 AM

Quote:

Originally Posted by maverickmk

what motor does it have? If a v8, how much?

350 500.00

**heehawracing** · 04-14-2021, 08:17 AM

Quote:

Originally Posted by heehawracing

350 500.00

i have 3 350 engines and a 305 and one 307

rjw · 04-14-2021, 10:10 AM

Quote:

Originally Posted by heehawracing

there in stock condition the truck ran and drove but not sure if in will need u joints and midshaft bearing 200.00 shipped

I'll take it
Send me your PayPal info
Thank you
Bob

**heehawracing** · 04-14-2021, 12:57 PM

Quote:

Originally Posted by rjw

I'll take it
Send me your PayPal info
Thank you
Bob

my paypal is heehawracing@bellsouth.net
thanks

**bigmac73** · 04-15-2021, 05:22 PM

looking for frame exhaust brackets

**Rods** · 04-16-2021, 09:18 AM

Price and condition of the gun rack.

FL71C10 · 04-17-2021, 11:03 PM

Got any working horns?

**heehawracing** · 04-18-2021, 07:13 AM

Quote:

Originally Posted by FL71C10

Got any working horns?

i have some i just pulled of im going to test them soon ill let you know

Accelo · 04-18-2021, 09:40 AM

interested in the Lower hood latch and Grill Center Support.
Am also interested in the 12pt bolts for the lower hood latch.

**heehawracing** · 04-18-2021, 11:00 AM

Quote:

Originally Posted by Accelo

interested in the Lower hood latch and Grill Center Support.
Am also interested in the 12pt bolts for the lower hood latch.

i have all that 80.00 shipped

Accelo · 04-19-2021, 01:18 AM

Quote:

Originally Posted by heehawracing

i have all that 80.00 shipped

I am also in need of the two rods that support the bed side just in front of the rear tires. Do you have them. I have a swb but i think they are the same as a LWB.
Rick

**heehawracing** · 04-19-2021, 01:13 PM

[QUOTE=Accelo;8910390]I am also in need of the two rods that support the bed side just in front of the rear tires. Do you have them. I have a swb but i think they are the same as a LWB.
Rick[/
i dont have any rods

pgnavy · 04-20-2021, 07:07 AM

Hi, power brake booster, bracket, rod? thank you

FL71C10 · 04-20-2021, 09:27 AM

Quote:

Originally Posted by heehawracing

i have some i just pulled of im going to test them soon ill let you know

Any word on the horns?

**heehawracing** · 04-20-2021, 10:01 AM

Quote:

Originally Posted by FL71C10

Any word on the horns?

so far all of them just click

FL71C10 · 04-20-2021, 10:21 AM

Thanks for checking. I have 2 that don't do anything, and 2 that sound like a wounded duck.

04-09-2021, 10:31 AM	#1
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	parting out 71 c10 parting out cab 1000.00 doors 150.00 each rust in the bottoms door panels 100.00 shipped parting out the complete truck will sell the complete cab doors and fenders it runs and drives 7704687776 Attached Images

04-09-2021, 10:55 AM	#2
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,300	Re: parting out 71 c10 I'm interested in the engine harness that goes from the firewall to the distributor and starter if the wires are good.

04-09-2021, 12:17 PM	#3
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,677	Re: parting out 71 c10 Are the fenders good, any rust? Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

04-12-2021, 06:13 PM	#6
rjw Registered User Join Date: Sep 2003 Location: marcellus ny Posts: 10	Re: parting out 71 c10 Interested in drive shaft including center bearing bracket Condition ? Long wheelbase? Price to 13108 Thanks Bob

04-14-2021, 07:57 AM	#8
maverickmk Senior Member Join Date: Nov 2019 Location: Cocoa FL Posts: 596	Re: parting out 71 c10 What motor does it have? If a V8, how much? __________________ Die with memories, not dreams. Not to brag, but I don't need alcohol to make really bad decisions. 1969 GMC Short Step Side

04-15-2021, 05:22 PM	#13
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: parting out 71 c10 looking for frame exhaust brackets Attached Images __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks

04-16-2021, 09:18 AM	#14
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,472	Re: parting out 71 c10 Price and condition of the gun rack. __________________ Az

04-17-2021, 11:03 PM	#15
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,506	Re: parting out 71 c10 Got any working horns? __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

04-18-2021, 09:40 AM	#17
Accelo Registered User Join Date: Mar 2015 Location: washington Posts: 2,151	Re: parting out 71 c10 interested in the Lower hood latch and Grill Center Support. Am also interested in the 12pt bolts for the lower hood latch. Last edited by Accelo; 04-18-2021 at 09:46 AM.

04-19-2021, 01:13 PM	#20
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: parting out 71 c10 [QUOTE=Accelo;8910390]I am also in need of the two rods that support the bed side just in front of the rear tires. Do you have them. I have a swb but i think they are the same as a LWB. Rick[/ i dont have any rods

04-20-2021, 07:07 AM	#21
pgnavy Registered User Join Date: Aug 2008 Location: Westborough, MA Posts: 14	Re: parting out 71 c10 Hi, power brake booster, bracket, rod? thank you

04-20-2021, 10:21 AM	#24
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,506	Re: parting out 71 c10 Thanks for checking. I have 2 that don't do anything, and 2 that sound like a wounded duck. __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.